Skip to main content

Articles

Page 5 of 9

  1. Despite the benefits of canal coverage structures, they may turn out to be a significant reason of decreasing canals conveyance efficiency if they are subject to blockage. The difficulty of removing wastes fro...

    Authors: Doaa A. Abo-Sreeaa, Nahla M. AboulAtta and Doaa A. El-Molla
    Citation: Journal of Engineering and Applied Science 2023 70:76
  2. The Agile nature allows changes within the development procedure which can sometimes be non-predictable and affect the cost and time of the software. Face-to-face communication appears to be a faster process i...

    Authors: Basit Habib, Rohaida Romli and Malina Zulkifli
    Citation: Journal of Engineering and Applied Science 2023 70:75
  3. In the present study, we aim to propose an effective and robust ensemble-learning approach with stacked generalization for image segmentation. Initially, the input images are processed for feature extraction a...

    Authors: Zahra Faska, Lahbib Khrissi, Khalid Haddouch and Nabil El Akkad
    Citation: Journal of Engineering and Applied Science 2023 70:74
  4. One of the most crucial factors architects should consider in building energy performance design is the energy consumption of residential buildings, particularly in megacities such as Cairo. Oxman classifies t...

    Authors: Soha Mohamed Elgohary, Ahmed Reda Abdin and Raghad Mofeed Mohamed
    Citation: Journal of Engineering and Applied Science 2023 70:73
  5. A technique is presented for shifting the manufacturing quality control of complex biomechanical catheters away from destructive testing of finished parts. This technique uses a more efficient real-time in-pro...

    Authors: Bikash Guha, Sean Moore and Jacques M. Huyghe
    Citation: Journal of Engineering and Applied Science 2023 70:72
  6. Without excellent system uptime and profit margins, many manufacturing systems will not be able to continue operating. Strong business performance of manufacturing companies is facilitated by system availabili...

    Authors: Abdullahi Sanusi and Ibrahim Yusuf
    Citation: Journal of Engineering and Applied Science 2023 70:71
  7. Structural engineers should appropriately design concrete structures to resist lateral loads. Determining the adequate system for resisting the expected lateral loads is important to control the building drift...

    Authors: Ahmed A. Elansary, Mohamed I. Metwally and Adel G. El-Attar
    Citation: Journal of Engineering and Applied Science 2023 70:70
  8. Decline curve analysis (DCA) is a widely used method to estimate the production performance and ultimate recovery of conventional and unconventional reservoirs. Due to the unconventional nature of shale wells,...

    Authors: Shams Coutry, Mahmoud Tantawy and Sayed Fadel
    Citation: Journal of Engineering and Applied Science 2023 70:69
  9. Catalysts’ surface structural features and characterizations play an important role in many chemical industrial processes among which is biofuel production. Heterogeneous catalysts strongly affect the types of...

    Authors: Sarah Hisham Hassan, Nahed Kamal Attia, Guzine Ibrahim El Diwani, Reem Sayed Ettouney, Mahmoud Abdel Hakim El-Rifai and Shereen Kamel Amin
    Citation: Journal of Engineering and Applied Science 2023 70:68
  10. In this paper, we propose a linear assignment problem (LAP) scheme using greedy algorithms to alleviate the intercell interference (ICI) in massive multi-input multiple-output (maMIMO) systems. ICI has been re...

    Authors: Daniel Kuyoli Ngala, Kwasi Adu-Boahen Opare, Emmanuel Ampoma Affum, Kwame Oteng Gyasi and Kwame Opuni-Boachie Obour Agyekum
    Citation: Journal of Engineering and Applied Science 2023 70:67
  11. A novel hybrid control strategy for reducing torque ripple in permanent magnet brushless direct current motors has been developed by combining the deterministic nature of direct torque control and the adaptive...

    Authors: Vijay Kumar Karan, Aftab Alam and Amarnath Thakur
    Citation: Journal of Engineering and Applied Science 2023 70:66
  12. Recently, renewable resources such as wind, hydro, and tidal have experienced a rapid development. Electricity production, based on wind, has been concentrated on a large scale. Additionally, a doubly fed indu...

    Authors: Batoul Amen Alsati, Ghassan Issa Ibrahim and Rami Ramadan Moussa
    Citation: Journal of Engineering and Applied Science 2023 70:65
  13. This research deals with the flexural performance of reinforced concrete beams which contain Recycled Concrete Aggregates (RCA) and were strengthened by Carbon Fiber Reinforced Polymers (CFRP). For this purpos...

    Authors: Ola Adel Ramadan Hemida, Hany Ahmed Abdalla and Hala Emad Elden Fouad
    Citation: Journal of Engineering and Applied Science 2023 70:64
  14. In this paper, a new methodology for time domain analysis of buildings on raft foundations considering soil – structure interaction is proposed. Sub-structuring technique is used to separate the building as su...

    Authors: Osama E. Shehata, Ahmed Fady Farid and Youssef F. Rashed
    Citation: Journal of Engineering and Applied Science 2023 70:63
  15. To solve the problem of air gap eccentric fault of traction motor, the fault characteristic frequency is close to the fundamental frequency, and the decomposed frequency affects each other, which is easy to ca...

    Authors: Jintian Yin, Zhilong He, Li Liu and Zhihua Peng
    Citation: Journal of Engineering and Applied Science 2023 70:62
  16. DNA has recently been investigated as a possible medium concerning ultra-compact information storage and ultra-scale computation. The development of secure image encryption systems has recently received a cert...

    Authors: Asmaa Hasan Alrubaie, Maisa’a Abid Ali Khodher and Ahmed Talib Abdulameer
    Citation: Journal of Engineering and Applied Science 2023 70:60
  17. The addition of powders in electrical discharge machining (EDM) reduces the breakdown strength of the liquid dielectric, thereby enhancing the occurrence of early spark, and aids in machinability. Challenges o...

    Authors: Jeavudeen Shiek, Jana Sairam and Pervaz Ahmed Mouda
    Citation: Journal of Engineering and Applied Science 2023 70:59
  18. This article describes the discontinuous adsorption of Mn(II) on kaolin from Guelma, Algeria (KGA), and blast furnace slag from Sider, Algeria (BFS), under the effect of various parameters, namely the contact ...

    Authors: Toufik Chouchane, Atmen. Boukari, Ouahida Khireddine, Sana Chibani and Sabiha Chouchane
    Citation: Journal of Engineering and Applied Science 2023 70:58
  19. This paper considers generating rectilinear motion using permanent magnets based on the surface charge method. In this regard, the existing analytical expressions of the interaction magnetic field between cubo...

    Authors: Jihad Rishmany, Guitta Sabiini, Ali Mansour and Rodrigue Imad
    Citation: Journal of Engineering and Applied Science 2023 70:57
  20. This paper investigates the problem of incipient fault detection and diagnosis (FDD) in wind energy conversion systems (WECS) using an innovative and effective approach called the ensemble learning-sine cosine...

    Authors: Khadija Attouri, Khaled Dhibi, Majdi Mansouri, Mansour Hajji, Kais Bouzrara and Hazem Nounou
    Citation: Journal of Engineering and Applied Science 2023 70:56
  21. Implementing plastic waste in construction materials is a sustainable disposal method to overcome plastic pollution. The current study aims to optimize the integration of plastic waste in cement bricks regardi...

    Authors: Yara El-Metwally, Khaled Dewidar, Mostafa Ismail and Iman El-Mahallawi
    Citation: Journal of Engineering and Applied Science 2023 70:55
  22. Disposal of waste material is causing environmental issues all around the world. Waste glass and tin can are two such products that impose detrimental effects on the environment. One feasible approach is to u...

    Authors: Tanvir Ahmed, Ayesha Ferdous Mita, Sourav Ray and Mohaiminul Haque
    Citation: Journal of Engineering and Applied Science 2023 70:53
  23. Establishing new cities and communities to absorb the growth of the population is an urban regime for urban development; especially in developing countries like Egypt. Despite the massive construction done in ...

    Authors: Walid S. Abdeldayem, Sherif Morgan, Sawsan Bakr and Ayman Abdelhamid
    Citation: Journal of Engineering and Applied Science 2023 70:52
  24. This paper investigates the performance of a single and a group of laterally loaded barrettes using a series of numerical models in a three-dimensional finite element software. The simulation of laterally load...

    Authors: Sherif A. Y. Akl, Abdelrahman N. Ismail, Mahmoud Abdelmoghni and Yasser A. Hegazy
    Citation: Journal of Engineering and Applied Science 2023 70:51
  25. A model is presented for shifting the manual intensive manufacturing process of complex biomedical devices towards more lean and efficient production process via application of concepts of cyber physical syste...

    Authors: Bikash Guha, Sean Moore and Jacques M. Huyghe
    Citation: Journal of Engineering and Applied Science 2023 70:50
  26. The impact of the COVID pandemic has resulted in many people cultivating a remote working culture and increasing building energy use. A reduction in the energy use of heating, ventilation, and air-conditioning...

    Authors: Samuel Boahen, Kwadwo Boateng Ofori-Amanfo, Kofi Owura Amoabeng, Godwin Ayetor, George Yaw Obeng, Richard Opoku and Dennis Edem Dzebre
    Citation: Journal of Engineering and Applied Science 2023 70:48
  27. The expanding proliferation of components for engineering applications requires greater optimisation of parameters, which consequently increases the need for more efficient boring practices. The Taguchi Pareto...

    Authors: Ebun Fasina, Babatunde Alade Sawyerr, Yakubu Umar Abdullahi and Sunday Ayoola Oke
    Citation: Journal of Engineering and Applied Science 2023 70:47
  28. In this paper, a safety method for a 3-DOF industrial robot is developed based on recurrent neural network (RNN). Safety standards for human robot interaction (HRI) are taken into accounts. The main objective ...

    Authors: Khaled H. Mahmoud, Abdel-Nasser Sharkawy and G. T. Abdel-Jaber
    Citation: Journal of Engineering and Applied Science 2023 70:44
  29. At the molecular level, the body is composed, on average, of water for 62%, fat for 15%, 17% of protein, and 6% of minerals. In this work, we propose a heuristic methodology using hydration models as a base to...

    Authors: Marco Tannino, Fabio Mangini, Lorenzo Dinia and Fabrizio Frezza
    Citation: Journal of Engineering and Applied Science 2023 70:43
  30. Nowadays, the allocation of electric vehicle charging stations (EVCS) for the charging of electric vehicles (EVs) is essential, as random allocation may cause significant energy loss for the radial distributio...

    Authors: Sayak Mondal, Parimal Acharjee and Aniruddha Bhattacharya
    Citation: Journal of Engineering and Applied Science 2023 70:42
  31. In this paper, opening characteristics of a pneumatically operated valve and methodology for controlling the valve opening duration have been investigated through numerical simulation. The valve has a poppet m...

    Authors: Debanjan Das, Shrey Waghmare, P. Padmanabhan, V. Kumaresan and D. P. Sudhakar
    Citation: Journal of Engineering and Applied Science 2023 70:41
  32. THz radiation detection using FET devices has attracted increasing attention lately. In this paper, we further study a simulated model of FET rectification detection in short channel length. To achieve this, b...

    Authors: Yasmeen A. Mohamed, Nihal Y. Ibrahim, Mohamed Y. F. El Zayat and Salah E. A. Elnahwy
    Citation: Journal of Engineering and Applied Science 2023 70:37
  33. The problem of global warming, along with environmental concerns, has already led governments to replace fossil-fuel vehicles with low-emission electric vehicles (EVs). The energy crisis and environmental prob...

    Authors: Abhinav Srivastava, Munish Manas and Rajesh Kumar Dubey
    Citation: Journal of Engineering and Applied Science 2023 70:32
  34. In recent years, researchers, designers, and project owners have deemed the dry facade system to be a suitable option. Consequently, much research has been conducted on the structural behavior of the dry facad...

    Authors: Mostafa Rezvanifar and Hamidreza Vosoughifar
    Citation: Journal of Engineering and Applied Science 2023 70:31
  35. Lubricating approaches involving nanoparticles have a significant role in reducing friction and wear. Reducing friction is crucial for preserving energy, minimizing emissions, and protecting the environment. T...

    Authors: Trishul Kulkarni, Bhagwan Toksha, Aniruddha Chatterjee, Jitendra Naik and Arun Autee
    Citation: Journal of Engineering and Applied Science 2023 70:29
  36. Assessing available numerical techniques adopted to determine the design time-dependent moment for prestressed concrete segmental bridges constructed by the balanced cantilever method is of utmost importance t...

    Authors: Magdy Rashed and Sameh S. F. Mehanny
    Citation: Journal of Engineering and Applied Science 2023 70:28

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions