- Correction
- Open access
- Published:
Correction: A fuzzy TOPSIS method for surface integrity criteria ranking using the wire electrical discharge machining process
Journal of Engineering and Applied Science volume 70, Article number: 130 (2023)
Correction: Journal of Engineering and Applied Science 70, 120 (2023)
https://doi.org/10.1186/s44147-023-00292-8
Following publication of the original article [1], we have been informed that the affiliation of the below authors, has been incorrectly assigned.
Babatunde Alade Sawyerr:
The incorrect affiliation is: Department of Mechanical Engineering, Osun State University, Osogbo, Nigeria
The correct affiliation is: Department of Computer Science, University of Lagos, Lagos, Nigeria
Ebun Fasina:
The incorrect affiliation is: Department of Mechanical Engineering, Osun State University, Osogbo, Nigeria
The correct affiliation is: Department of Computer Science, University of Lagos, Lagos, Nigeria
WasiuOyediran Adedeji:
The incorrect affiliation is: Department of Mechanical Engineering, University of Lagos, Lagos, Nigeria
The correct affiliation is: Department of Mechanical Engineering, Osun State University, Osogbo, Nigeria
Mofoluso Kehinde Adeniran:
The incorrect affiliation is: Department of Manufacturing Engineering, Vellore Institute of Technology, Chennai, India
The correct affiliation is: Department of Mechanical Engineering, University of Lagos, Lagos, Nigeria
Sunday Ayoola Oke:
The incorrect affiliation is: Department of Manufacturing Engineering, Vellore Institute of Technology, Chennai, India
The correct affiliation is: Department of Mechanical Engineering, University of Lagos, Lagos, Nigeria
Reference
Sawyerr et al (2023) A fuzzy TOPSIS method for surface integrity criteria ranking using the wire electrical discharge machining process. J Eng Appl Sci 70:120. https://doi.org/10.1186/s44147-023-00292-8
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Sawyerr, B.A., Fasina, E., Adedeji, W.O. et al. Correction: A fuzzy TOPSIS method for surface integrity criteria ranking using the wire electrical discharge machining process. J. Eng. Appl. Sci. 70, 130 (2023). https://doi.org/10.1186/s44147-023-00304-7
Published:
DOI: https://doi.org/10.1186/s44147-023-00304-7