Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 4 of 9

  1. In Egypt, basalt manufacturing generates waste materials at a rate of about 33%. The disposal of basalt waste through the manufacturing of cementitious materials is an economically feasible approach. This work...

    Authors: Hani A. Mashout, Taha A. Razek, Mohamed S. Amin, Fayza S. Hashem and Faten A. Selim
    Citation: Journal of Engineering and Applied Science 2023 70:106
    Content type: Research Published on:

  2. This research paper examined the operational performance and greenhouse gas (GHG) emissions of an existing gas treatment plant. Extensive data collection and analysis were undertaken to assess energy consumpti...

    Authors: Mohamed Magdy El-Eishy, Galal Mohamed Abdelalim and Tarek Mohammad Aboul-Fotouh
    Citation: Journal of Engineering and Applied Science 2023 70:105
    Content type: Research Published on:

  3. Additive manufacturing (AM) is an innovative procedure that can quickly create complex structures. By layering a material, a three-dimensional object is created using this technique. Every deposit of liquefied...

    Authors: Akshay S. Karad, Puskaraj D. Sonawwanay, Mahesh Naik and D. G. Thakur
    Citation: Journal of Engineering and Applied Science 2023 70:104
    Content type: Research Published on:

  4. The shovel-truck system is a widely used technique for haulage systems in surface mining operations. However, predicting the failure patterns of complex systems requires accurate failure prediction techniques....

    Authors: Amin Moniri-Morad and Javad Sattarvand
    Citation: Journal of Engineering and Applied Science 2023 70:103
    Content type: Research Published on:

  5. This study addresses the complex issue of preserving the historic fabric and cultural assets while promoting sustainable development in urban areas, focusing on the Adi Ganga River in Kolkata, India. The probl...

    Authors: Shilpi Chakraborty and Shiva Ji
    Citation: Journal of Engineering and Applied Science 2023 70:102
    Content type: Research Published on:

  6. This proposed work deals with the implementation of a single-phase topology with using hybrid for multilevel inverters. It is observed that the proposed structure improves the performance of the hybrid multile...

    Authors: B. Pragathi, Sonu Kumar, P Rajani Kumari and Arvind R. Singh
    Citation: Journal of Engineering and Applied Science 2023 70:101
    Content type: Research Published on:

  7. The present paper explores the experimental study on the influence of steel fibres (SF) and polyvinyl alcohol fibres (PVAF) as monofibres on the strength, and cracking properties of alkali-activated concrete w...

    Authors: Mangalapuri Venkateswarlu and T. D. Gunneswara Rao
    Citation: Journal of Engineering and Applied Science 2023 70:100
    Content type: Research Published on:

  8. The effect of aspect ratio and baffle shape on natural convection patterns in a U-shaped cavity filled with CuO water-based nanofluid is examined in detail, with a T-shaped baffle attached to the cold wall. To...

    Authors: Farah Zemani, Omar Ladjedel and Amina Sabeur
    Citation: Journal of Engineering and Applied Science 2023 70:99
    Content type: Reviews Published on:

  9. Laser drilling is capable of reducing drilling costs and time. In laser drilling, a high rate of penetration (ROP) can be achieved, and the hole is cased due to laser interaction once it is drilled. In additio...

    Authors: Mohamed Hosin ElNeiri, Abdel Sattar Abdel Hamid Dahab, Abdulaziz Mohamed Abdulaziz and Khalid Mahmoud Abdelghany
    Citation: Journal of Engineering and Applied Science 2023 70:98
    Content type: Reviews Published on:

  10. One of the characteristics of a robust power grid is minimal variations in its frequency to load change or loss in generating unit(s). From the perspective of optimal control theory, the issue of load frequenc...

    Authors: Ebunle Akupan Rene and Willy Stephen Tounsi Fokui
    Citation: Journal of Engineering and Applied Science 2023 70:97
    Content type: Research Published on:

  11. Buildings can generate heat from a variety of sources, including building occupants, the sun, lighting and radiance, and cooling equipment, the energy consumed by which results in heat. Egypt is experiencing r...

    Authors: Ayah Mohamed Ramadhan and Ayman Hassaan Mahmoud
    Citation: Journal of Engineering and Applied Science 2023 70:96
    Content type: Research Published on:

  12. In this research, fuzzy linear regression (FLR) method combined with three well-known fuzzy implications was implemented for evaluating the relation among the amount of fly ash in concrete mixture and the comp...

    Authors: Fani Gkountakou and Basil Papadopoulos
    Citation: Journal of Engineering and Applied Science 2023 70:95
    Content type: Research Published on:

  13. This study used a regression model, experimental data from a viscosity measurement device, and a computational technique to investigate the relationship between lubricant viscosity and surface-attached adhesio...

    Authors: Tanakorn Jantarasricha
    Citation: Journal of Engineering and Applied Science 2023 70:94
    Content type: Research Published on:

  14. The method of diesel oxidation catalyst (DOC) assistance is an effective way to achieve active regeneration of diesel particulate filter (DPF). Therefore, an appropriate DOC inlet temperature is the essential ...

    Authors: Shenggang Guo, Yu Zhang, Xiaoxue Zhang, Hengxiao Man and Hao Liu
    Citation: Journal of Engineering and Applied Science 2023 70:93
    Content type: Research Published on:

  15. This study presents a static analysis and natural frequency analysis of functionally graded laminated piezoelectric beams based on the Euler–Bernoulli theory using the finite element method. A simple power law...

    Authors: Arsalan Azizzadeh and Bashir Behjat
    Citation: Journal of Engineering and Applied Science 2023 70:92
    Content type: Research Published on:

  17. Nowadays, the world is facing a global issue as a result of the depletion of the environment’s natural resources. This is a consequence of conventional building techniques that exploit these resources without ...

    Authors: Sherine Fathy Alagamy
    Citation: Journal of Engineering and Applied Science 2023 70:90
    Content type: Research Published on:

  19. In this study, the effect of bio-mineral oil blend quenchants on the mechanical properties of carburized mild steel was experimentally studied and reported. The tensile, hardness, impact, and microstructural t...

    Authors: Maruf Yinka Kolawole, Suleman Adeniyi Aliyu, Sefiu Adekunle Bello, Kamoru Olufemi Oladosu and Ilesanmi Jonathan Owoeye
    Citation: Journal of Engineering and Applied Science 2023 70:88
    Content type: Research Published on:

  20. Multi-particulate flow CFD modelling is carried out while taking eccentricity into account considering drilling horizontal oil wells. The present work focuses on the effect of different cuttings sizes and thei...

    Authors: Vivek Deshmukh and Satish Kumar Dewangan
    Citation: Journal of Engineering and Applied Science 2023 70:87
    Content type: Research Published on:

  21. Reducing power consumption is a major challenge in developing integrated processors for smart portable devices. This is particularly important for extending battery life and ensuring extended usage of the devi...

    Authors: Jayalakshmi K. P., Priya Seema Miranda and K. Aarya Shri
    Citation: Journal of Engineering and Applied Science 2023 70:86
    Content type: Research Published on:

  23. The alternative load path (ALP) method is an important modern design approach to prevent progressive collapse of buildings by redesigning adjacent structural elements to provide an alternative load path in cas...

    Authors: Mahmoud Mohamed Nabil Maher Ashoub and Walid Abdel Latif Attia
    Citation: Journal of Engineering and Applied Science 2023 70:84
    Content type: Research Published on:

  25. The transportation problem in operations research aims to minimize costs by optimizing the allocation of goods from multiple sources to destinations, considering supply, demand, and transportation constraints....

    Authors: Mohamed H. Abdelati, Ali M. Abd-El-Tawwab, Elsayed Elsayed M. Ellimony and M Rabie
    Citation: Journal of Engineering and Applied Science 2023 70:82
    Content type: Research Published on:

  26. Given the vast range of factors, including shape, size, skew, and orientation of handwritten numerals, their machine-based recognition is a difficult challenge for researchers in the pattern recognition field....

    Authors: Danveer Rajpal and Akhil Ranjan Garg
    Citation: Journal of Engineering and Applied Science 2023 70:81
    Content type: Research Published on:

  28. The research was carried out to assess the concentration and distribution of heavy metals in groundwater from selected automobile workshops in Ozoro metropolis, a busy university town, in the Niger Delta regio...

    Authors: Hilary Ijeoma Owamah, Thomas Obaro Akpoedafe, Sunday Chukwuyem Ikpeseni, Eguakhide Atikpo, Henry Oghenero Orugba and Solomon Oyebisi
    Citation: Journal of Engineering and Applied Science 2023 70:79
    Content type: Research Published on:

  29. Mobile health (mHealth) systems are sipping into more and more healthcare functions with self-management being the foremost modus operandi. However, there has been challenges. This study explores challenges wi...

    Authors: Bliss Utibe-Abasi Stephen, Benedicta C. Uzoewulu, Phillip Michael Asuquo and Simeon Ozuomba
    Citation: Journal of Engineering and Applied Science 2023 70:78
    Content type: Reviews Published on:

  31. Despite the benefits of canal coverage structures, they may turn out to be a significant reason of decreasing canals conveyance efficiency if they are subject to blockage. The difficulty of removing wastes fro...

    Authors: Doaa A. Abo-Sreeaa, Nahla M. AboulAtta and Doaa A. El-Molla
    Citation: Journal of Engineering and Applied Science 2023 70:76
    Content type: Research Published on:

  32. The Agile nature allows changes within the development procedure which can sometimes be non-predictable and affect the cost and time of the software. Face-to-face communication appears to be a faster process i...

    Authors: Basit Habib, Rohaida Romli and Malina Zulkifli
    Citation: Journal of Engineering and Applied Science 2023 70:75
    Content type: Research Published on:

  33. In the present study, we aim to propose an effective and robust ensemble-learning approach with stacked generalization for image segmentation. Initially, the input images are processed for feature extraction a...

    Authors: Zahra Faska, Lahbib Khrissi, Khalid Haddouch and Nabil El Akkad
    Citation: Journal of Engineering and Applied Science 2023 70:74
    Content type: Research Published on:

  34. One of the most crucial factors architects should consider in building energy performance design is the energy consumption of residential buildings, particularly in megacities such as Cairo. Oxman classifies t...

    Authors: Soha Mohamed Elgohary, Ahmed Reda Abdin and Raghad Mofeed Mohamed
    Citation: Journal of Engineering and Applied Science 2023 70:73
    Content type: Research Published on:

  35. A technique is presented for shifting the manufacturing quality control of complex biomechanical catheters away from destructive testing of finished parts. This technique uses a more efficient real-time in-pro...

    Authors: Bikash Guha, Sean Moore and Jacques M. Huyghe
    Citation: Journal of Engineering and Applied Science 2023 70:72
    Content type: Research Published on:

  36. Without excellent system uptime and profit margins, many manufacturing systems will not be able to continue operating. Strong business performance of manufacturing companies is facilitated by system availabili...

    Authors: Abdullahi Sanusi and Ibrahim Yusuf
    Citation: Journal of Engineering and Applied Science 2023 70:71
    Content type: Research Published on:

  37. Structural engineers should appropriately design concrete structures to resist lateral loads. Determining the adequate system for resisting the expected lateral loads is important to control the building drift...

    Authors: Ahmed A. Elansary, Mohamed I. Metwally and Adel G. El-Attar
    Citation: Journal of Engineering and Applied Science 2023 70:70
    Content type: Research Published on:

  38. Decline curve analysis (DCA) is a widely used method to estimate the production performance and ultimate recovery of conventional and unconventional reservoirs. Due to the unconventional nature of shale wells,...

    Authors: Shams Coutry, Mahmoud Tantawy and Sayed Fadel
    Citation: Journal of Engineering and Applied Science 2023 70:69
    Content type: Research Published on:

  39. Catalysts’ surface structural features and characterizations play an important role in many chemical industrial processes among which is biofuel production. Heterogeneous catalysts strongly affect the types of...

    Authors: Sarah Hisham Hassan, Nahed Kamal Attia, Guzine Ibrahim El Diwani, Reem Sayed Ettouney, Mahmoud Abdel Hakim El-Rifai and Shereen Kamel Amin
    Citation: Journal of Engineering and Applied Science 2023 70:68
    Content type: Research Published on:

  40. In this paper, we propose a linear assignment problem (LAP) scheme using greedy algorithms to alleviate the intercell interference (ICI) in massive multi-input multiple-output (maMIMO) systems. ICI has been re...

    Authors: Daniel Kuyoli Ngala, Kwasi Adu-Boahen Opare, Emmanuel Ampoma Affum, Kwame Oteng Gyasi and Kwame Opuni-Boachie Obour Agyekum
    Citation: Journal of Engineering and Applied Science 2023 70:67
    Content type: Research Published on:

  41. A novel hybrid control strategy for reducing torque ripple in permanent magnet brushless direct current motors has been developed by combining the deterministic nature of direct torque control and the adaptive...

    Authors: Vijay Kumar Karan, Aftab Alam and Amarnath Thakur
    Citation: Journal of Engineering and Applied Science 2023 70:66
    Content type: Research Published on:

  42. Recently, renewable resources such as wind, hydro, and tidal have experienced a rapid development. Electricity production, based on wind, has been concentrated on a large scale. Additionally, a doubly fed indu...

    Authors: Batoul Amen Alsati, Ghassan Issa Ibrahim and Rami Ramadan Moussa
    Citation: Journal of Engineering and Applied Science 2023 70:65
    Content type: Research Published on:

  43. This research deals with the flexural performance of reinforced concrete beams which contain Recycled Concrete Aggregates (RCA) and were strengthened by Carbon Fiber Reinforced Polymers (CFRP). For this purpos...

    Authors: Ola Adel Ramadan Hemida, Hany Ahmed Abdalla and Hala Emad Elden Fouad
    Citation: Journal of Engineering and Applied Science 2023 70:64
    Content type: Research Published on:

  44. In this paper, a new methodology for time domain analysis of buildings on raft foundations considering soil – structure interaction is proposed. Sub-structuring technique is used to separate the building as su...

    Authors: Osama E. Shehata, Ahmed Fady Farid and Youssef F. Rashed
    Citation: Journal of Engineering and Applied Science 2023 70:63
    Content type: Research Published on:

  45. To solve the problem of air gap eccentric fault of traction motor, the fault characteristic frequency is close to the fundamental frequency, and the decomposed frequency affects each other, which is easy to ca...

    Authors: Jintian Yin, Zhilong He, Li Liu and Zhihua Peng
    Citation: Journal of Engineering and Applied Science 2023 70:62
    Content type: Research Published on:

  47. DNA has recently been investigated as a possible medium concerning ultra-compact information storage and ultra-scale computation. The development of secure image encryption systems has recently received a cert...

    Authors: Asmaa Hasan Alrubaie, Maisa’a Abid Ali Khodher and Ahmed Talib Abdulameer
    Citation: Journal of Engineering and Applied Science 2023 70:60
    Content type: Research Published on:

  48. The addition of powders in electrical discharge machining (EDM) reduces the breakdown strength of the liquid dielectric, thereby enhancing the occurrence of early spark, and aids in machinability. Challenges o...

    Authors: Jeavudeen Shiek, Jana Sairam and Pervaz Ahmed Mouda
    Citation: Journal of Engineering and Applied Science 2023 70:59
    Content type: Research Published on:

  49. This article describes the discontinuous adsorption of Mn(II) on kaolin from Guelma, Algeria (KGA), and blast furnace slag from Sider, Algeria (BFS), under the effect of various parameters, namely the contact ...

    Authors: Toufik Chouchane, Atmen. Boukari, Ouahida Khireddine, Sana Chibani and Sabiha Chouchane
    Citation: Journal of Engineering and Applied Science 2023 70:58
    Content type: Research Published on:

  50. This paper considers generating rectilinear motion using permanent magnets based on the surface charge method. In this regard, the existing analytical expressions of the interaction magnetic field between cubo...

    Authors: Jihad Rishmany, Guitta Sabiini, Ali Mansour and Rodrigue Imad
    Citation: Journal of Engineering and Applied Science 2023 70:57
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions