Skip to main content

Articles

Page 5 of 10

  1. The objective of this study is to propose a method called the fuzzy technique for order preference by similarity to the ideal solution (F-TOPSIS) to select parameters of the wire electrical discharge machining...

    Authors: Babatunde Alade Sawyerr, Ebun Fasina, Wasiu Oyediran Adedeji, Mofoluso Kehinde Adeniran, Sunday Ayoola Oke and John Rajan
    Citation: Journal of Engineering and Applied Science 2023 70:120

    The Correction to this article has been published in Journal of Engineering and Applied Science 2023 70:130

  2. Monitoring of water intake is critical for managing the health and wellness of individuals with various health conditions, including young children, sick adults, the elderly, and individuals seeking better wei...

    Authors: E. A. Hassan and A. A. Morsy
    Citation: Journal of Engineering and Applied Science 2023 70:118
  3. This study is focused on fabrication of Hybrid Al6061/SiC + TiB2 MMC by stir casting process, primarily to study the effect of two different reinforcement particles on mechanical properties and microstructure. Ad...

    Authors: Nilesh Kumar and Jatinder Kumar
    Citation: Journal of Engineering and Applied Science 2023 70:117
  4. Closed-loop identification of multi-input multi-output (MIMO) systems in large-scale plants has significant difficulties due to subsystem interactions. This complexity is attributed to several input‒output var...

    Authors: Mohamed A. Rahim
    Citation: Journal of Engineering and Applied Science 2023 70:116
  5. Slab track is a recent technology used to cope up with the train high axle loads and speed, it has replaced the ballast material in classical ballasted track with either reinforced concrete slab or asphalt lay...

    Authors: Mohamed Hafez Fahmy Aly, Islam Mahmoud Abou El-Naga, Ahmed Abdul Hay Soliman and Muhammad Ahmad Diab
    Citation: Journal of Engineering and Applied Science 2023 70:115
  6. This study focuses on enhancing indoor air quality and thermal comfort in indoor swimming pool facilities through the investigation of ventilation system configurations. Creating a comfortable and healthy envi...

    Authors: Ahmed M. Hanafi, Mohamed A. Ibrahim, Taher M. Abou-deif and Samy M. Morcos
    Citation: Journal of Engineering and Applied Science 2023 70:114
  7. Lower energy consumption while preserving the required light brightness is one of the main purposes of changing from an HPSV lighting system to a LED lighting system for road lighting. The current practice of ...

    Authors: Mohd Hanif Jamaludin, Wan Zakiah Wan Ismail, Elina Mohd Husini and Nor Ain Mohd Bahror
    Citation: Journal of Engineering and Applied Science 2023 70:112
  8. Induction heating offers numerous advantages over conventional methods for heating high-pressure fluids in hydraulic testing applications. It simplifies complex processes, mitigates the risks associated with h...

    Authors: Tom Thampy, Emmanuel Gospel Raj Rivington, Madan Mohan Avulapati and Niroop Srinivasa Murthy
    Citation: Journal of Engineering and Applied Science 2023 70:111
  9. A closed-form solution of the triangular porous fin with a simultaneous variation of power law-dependent heat transfer coefficient, internal heat generation, and surface emissivity parameters under the influen...

    Authors: Pranab Kanti Roy and Joy Prakash Das
    Citation: Journal of Engineering and Applied Science 2023 70:110
  10. In the context of Industry 4.0, which prioritizes intelligent and efficient solutions for industrial systems, this paper introduces an innovative methodology for fault detection and fault-tolerant control of D...

    Authors: Abolghasem Sardashti and Jamal Nazari
    Citation: Journal of Engineering and Applied Science 2023 70:109
  11. This paper aims to present the structural design and the rehabilitation process as well as the site assessment of the reconstruction and rehabilitation of the twelfth-century Grand Al-Nouri Mosque in Al-Nouri ...

    Authors: Mohamed Gamal Aboelhassan, Ahmed Mokhtar Tarabia and Sherif Farag Hassan
    Citation: Journal of Engineering and Applied Science 2023 70:108
  12. Ultra-high performance concrete (UHPC) benefits the construction industry due to its improved flexibility, high workability, durability, and performance compared to normal concrete. Some investigators have con...

    Authors: Nana Gong and Naimin Zhang
    Citation: Journal of Engineering and Applied Science 2023 70:107
  13. In Egypt, basalt manufacturing generates waste materials at a rate of about 33%. The disposal of basalt waste through the manufacturing of cementitious materials is an economically feasible approach. This work...

    Authors: Hani A. Mashout, Taha A. Razek, Mohamed S. Amin, Fayza S. Hashem and Faten A. Selim
    Citation: Journal of Engineering and Applied Science 2023 70:106
  14. This research paper examined the operational performance and greenhouse gas (GHG) emissions of an existing gas treatment plant. Extensive data collection and analysis were undertaken to assess energy consumpti...

    Authors: Mohamed Magdy El-Eishy, Galal Mohamed Abdelalim and Tarek Mohammad Aboul-Fotouh
    Citation: Journal of Engineering and Applied Science 2023 70:105
  15. Additive manufacturing (AM) is an innovative procedure that can quickly create complex structures. By layering a material, a three-dimensional object is created using this technique. Every deposit of liquefied...

    Authors: Akshay S. Karad, Puskaraj D. Sonawwanay, Mahesh Naik and D. G. Thakur
    Citation: Journal of Engineering and Applied Science 2023 70:104
  16. The shovel-truck system is a widely used technique for haulage systems in surface mining operations. However, predicting the failure patterns of complex systems requires accurate failure prediction techniques....

    Authors: Amin Moniri-Morad and Javad Sattarvand
    Citation: Journal of Engineering and Applied Science 2023 70:103
  17. This study addresses the complex issue of preserving the historic fabric and cultural assets while promoting sustainable development in urban areas, focusing on the Adi Ganga River in Kolkata, India. The probl...

    Authors: Shilpi Chakraborty and Shiva Ji
    Citation: Journal of Engineering and Applied Science 2023 70:102
  18. This proposed work deals with the implementation of a single-phase topology with using hybrid for multilevel inverters. It is observed that the proposed structure improves the performance of the hybrid multile...

    Authors: B. Pragathi, Sonu Kumar, P Rajani Kumari and Arvind R. Singh
    Citation: Journal of Engineering and Applied Science 2023 70:101
  19. The present paper explores the experimental study on the influence of steel fibres (SF) and polyvinyl alcohol fibres (PVAF) as monofibres on the strength, and cracking properties of alkali-activated concrete w...

    Authors: Mangalapuri Venkateswarlu and T. D. Gunneswara Rao
    Citation: Journal of Engineering and Applied Science 2023 70:100
  20. The effect of aspect ratio and baffle shape on natural convection patterns in a U-shaped cavity filled with CuO water-based nanofluid is examined in detail, with a T-shaped baffle attached to the cold wall. To...

    Authors: Farah Zemani, Omar Ladjedel and Amina Sabeur
    Citation: Journal of Engineering and Applied Science 2023 70:99
  21. Laser drilling is capable of reducing drilling costs and time. In laser drilling, a high rate of penetration (ROP) can be achieved, and the hole is cased due to laser interaction once it is drilled. In additio...

    Authors: Mohamed Hosin ElNeiri, Abdel Sattar Abdel Hamid Dahab, Abdulaziz Mohamed Abdulaziz and Khalid Mahmoud Abdelghany
    Citation: Journal of Engineering and Applied Science 2023 70:98
  22. One of the characteristics of a robust power grid is minimal variations in its frequency to load change or loss in generating unit(s). From the perspective of optimal control theory, the issue of load frequenc...

    Authors: Ebunle Akupan Rene and Willy Stephen Tounsi Fokui
    Citation: Journal of Engineering and Applied Science 2023 70:97
  23. Buildings can generate heat from a variety of sources, including building occupants, the sun, lighting and radiance, and cooling equipment, the energy consumed by which results in heat. Egypt is experiencing r...

    Authors: Ayah Mohamed Ramadhan and Ayman Hassaan Mahmoud
    Citation: Journal of Engineering and Applied Science 2023 70:96
  24. In this research, fuzzy linear regression (FLR) method combined with three well-known fuzzy implications was implemented for evaluating the relation among the amount of fly ash in concrete mixture and the comp...

    Authors: Fani Gkountakou and Basil Papadopoulos
    Citation: Journal of Engineering and Applied Science 2023 70:95
  25. This study used a regression model, experimental data from a viscosity measurement device, and a computational technique to investigate the relationship between lubricant viscosity and surface-attached adhesio...

    Authors: Tanakorn Jantarasricha
    Citation: Journal of Engineering and Applied Science 2023 70:94
  26. The method of diesel oxidation catalyst (DOC) assistance is an effective way to achieve active regeneration of diesel particulate filter (DPF). Therefore, an appropriate DOC inlet temperature is the essential ...

    Authors: Shenggang Guo, Yu Zhang, Xiaoxue Zhang, Hengxiao Man and Hao Liu
    Citation: Journal of Engineering and Applied Science 2023 70:93
  27. This study presents a static analysis and natural frequency analysis of functionally graded laminated piezoelectric beams based on the Euler–Bernoulli theory using the finite element method. A simple power law...

    Authors: Arsalan Azizzadeh and Bashir Behjat
    Citation: Journal of Engineering and Applied Science 2023 70:92
  28. Nowadays, the world is facing a global issue as a result of the depletion of the environment’s natural resources. This is a consequence of conventional building techniques that exploit these resources without ...

    Authors: Sherine Fathy Alagamy
    Citation: Journal of Engineering and Applied Science 2023 70:90
  29. In this study, the effect of bio-mineral oil blend quenchants on the mechanical properties of carburized mild steel was experimentally studied and reported. The tensile, hardness, impact, and microstructural t...

    Authors: Maruf Yinka Kolawole, Suleman Adeniyi Aliyu, Sefiu Adekunle Bello, Kamoru Olufemi Oladosu and Ilesanmi Jonathan Owoeye
    Citation: Journal of Engineering and Applied Science 2023 70:88
  30. Multi-particulate flow CFD modelling is carried out while taking eccentricity into account considering drilling horizontal oil wells. The present work focuses on the effect of different cuttings sizes and thei...

    Authors: Vivek Deshmukh and Satish Kumar Dewangan
    Citation: Journal of Engineering and Applied Science 2023 70:87
  31. Reducing power consumption is a major challenge in developing integrated processors for smart portable devices. This is particularly important for extending battery life and ensuring extended usage of the devi...

    Authors: Jayalakshmi K. P., Priya Seema Miranda and K. Aarya Shri
    Citation: Journal of Engineering and Applied Science 2023 70:86
  32. The alternative load path (ALP) method is an important modern design approach to prevent progressive collapse of buildings by redesigning adjacent structural elements to provide an alternative load path in cas...

    Authors: Mahmoud Mohamed Nabil Maher Ashoub and Walid Abdel Latif Attia
    Citation: Journal of Engineering and Applied Science 2023 70:84
  33. The transportation problem in operations research aims to minimize costs by optimizing the allocation of goods from multiple sources to destinations, considering supply, demand, and transportation constraints....

    Authors: Mohamed H. Abdelati, Ali M. Abd-El-Tawwab, Elsayed Elsayed M. Ellimony and M Rabie
    Citation: Journal of Engineering and Applied Science 2023 70:82
  34. Given the vast range of factors, including shape, size, skew, and orientation of handwritten numerals, their machine-based recognition is a difficult challenge for researchers in the pattern recognition field....

    Authors: Danveer Rajpal and Akhil Ranjan Garg
    Citation: Journal of Engineering and Applied Science 2023 70:81
  35. The research was carried out to assess the concentration and distribution of heavy metals in groundwater from selected automobile workshops in Ozoro metropolis, a busy university town, in the Niger Delta regio...

    Authors: Hilary Ijeoma Owamah, Thomas Obaro Akpoedafe, Sunday Chukwuyem Ikpeseni, Eguakhide Atikpo, Henry Oghenero Orugba and Solomon Oyebisi
    Citation: Journal of Engineering and Applied Science 2023 70:79
  36. Mobile health (mHealth) systems are sipping into more and more healthcare functions with self-management being the foremost modus operandi. However, there has been challenges. This study explores challenges wi...

    Authors: Bliss Utibe-Abasi Stephen, Benedicta C. Uzoewulu, Phillip Michael Asuquo and Simeon Ozuomba
    Citation: Journal of Engineering and Applied Science 2023 70:78
  37. Despite the benefits of canal coverage structures, they may turn out to be a significant reason of decreasing canals conveyance efficiency if they are subject to blockage. The difficulty of removing wastes fro...

    Authors: Doaa A. Abo-Sreeaa, Nahla M. AboulAtta and Doaa A. El-Molla
    Citation: Journal of Engineering and Applied Science 2023 70:76
  38. The Agile nature allows changes within the development procedure which can sometimes be non-predictable and affect the cost and time of the software. Face-to-face communication appears to be a faster process i...

    Authors: Basit Habib, Rohaida Romli and Malina Zulkifli
    Citation: Journal of Engineering and Applied Science 2023 70:75
  39. In the present study, we aim to propose an effective and robust ensemble-learning approach with stacked generalization for image segmentation. Initially, the input images are processed for feature extraction a...

    Authors: Zahra Faska, Lahbib Khrissi, Khalid Haddouch and Nabil El Akkad
    Citation: Journal of Engineering and Applied Science 2023 70:74
  40. One of the most crucial factors architects should consider in building energy performance design is the energy consumption of residential buildings, particularly in megacities such as Cairo. Oxman classifies t...

    Authors: Soha Mohamed Elgohary, Ahmed Reda Abdin and Raghad Mofeed Mohamed
    Citation: Journal of Engineering and Applied Science 2023 70:73
  41. A technique is presented for shifting the manufacturing quality control of complex biomechanical catheters away from destructive testing of finished parts. This technique uses a more efficient real-time in-pro...

    Authors: Bikash Guha, Sean Moore and Jacques M. Huyghe
    Citation: Journal of Engineering and Applied Science 2023 70:72
  42. Without excellent system uptime and profit margins, many manufacturing systems will not be able to continue operating. Strong business performance of manufacturing companies is facilitated by system availabili...

    Authors: Abdullahi Sanusi and Ibrahim Yusuf
    Citation: Journal of Engineering and Applied Science 2023 70:71

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

Annual Journal Metrics

Citation Impact 2023
Source Normalized Impact per Paper (SNIP): 0.598
SCImago Journal Rank (SJR): 0.287

Speed 2023
Submission to first editorial decision (median days): 4
Submission to acceptance (median days): 97

Usage 2023
Downloads: 399,177
Altmetric mentions: 10