Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 3 of 9

  1. Congestion management in deregulated electricity systems threatens system security and reliability. Integration of renewable energy sources, unpredictable wind power, load demand, and the requirement for quick...

    Authors: Ch. Lokeshwar Reddy, K. Rayudu, M. Sharanya, Sridhar Patthi and J. V. G. Rama Rao
    Citation: Journal of Engineering and Applied Science 2023 70:155
    Content type: Research Published on:

  2. Enhanced oil recovery (EOR) relies on the use of surfactant to flood the wellbore and thus extract the oil from the rocks. However, current surfactants used for EOR are non-biodegradable and are made from toxi...

    Authors: Jalliah Sharelle U. Tabaniag, Mary Quincy D. Abad, Christian Jules R. Morcelos, Gene Vincent B. Geraldino, Jon Larsen M. Alvarado and Edgar Clyde R. Lopez
    Citation: Journal of Engineering and Applied Science 2023 70:154
    Content type: Research Published on:

  3. Porous concrete (PC) is a very popular construction material in developed countries and is now finding application in India in parking lots. In this investigation, an effort was made to study the various perfo...

    Authors: M. C. Nataraja, Lakshmikanth Srinivasamurthy, Vivek R. Das and L. Vineeth
    Citation: Journal of Engineering and Applied Science 2023 70:153
    Content type: Research Published on:

  4. Selecting appropriate structural system for reinforced concrete (RC) buildings is essential in the design process to satisfy serviceability and strength requirements. Using ordinary analysis (OA) may result in...

    Authors: Ahmed Elansary, Mohamed I. Metwally and Adel El-Attar
    Citation: Journal of Engineering and Applied Science 2023 70:152
    Content type: Research Published on:

  5. Due to increased traffic and environmental concerns, this study addresses challenges in conventional asphalt concrete. Our focus is on enhancing the water resistance of asphalt mixes through the optimization o...

    Authors: Nura Shehu Aliyu Yaro, Muslich Hartadi Sutanto, Noor Zainab Habib, Aliyu Usman, Liza Evianti Tanjung, Ibrahim Aliyu and Ahmad Hussaini Jagaba
    Citation: Journal of Engineering and Applied Science 2023 70:151
    Content type: Research Published on:

  6. This study examines the feasibility of utilizing steel concentrically X-bracing rigidly connected to shear link to retrofit seismically defected reinforced concrete (RC) frames. It involves examining the later...

    Authors: Ashraf Osman and Ahmed E. Farouk
    Citation: Journal of Engineering and Applied Science 2023 70:150
    Content type: Research Published on:

  7. This paper proposes an optimization study for both structure and materials to obtain an affordable, long-span, light-weight, and fast-constructing T-shape lightweight concrete-filled steel tubular (LWCFST) gir...

    Authors: Mohamed Emam El-Kherbawy, Alaa M. Morsy, Maheeb Abdel-Ghaffar and Yasser A. Khalifa
    Citation: Journal of Engineering and Applied Science 2023 70:149
    Content type: Research Published on:

  8. Now that the population is growing, the expenditure on basic needs of life is also increasing due to a lack of or less availability of resources. The economy consumed electricity is reaching peaks as its main ...

    Authors: Munish Manas, Shivi Sharma, K. Shashidhar Reddy and Abhinav Srivastava
    Citation: Journal of Engineering and Applied Science 2023 70:148
    Content type: Reviews Published on:

  10. Underground reinforced concrete (RC) structures, such as tunnels and pipelines, are frequently employed in urban areas and are designed to withstand both static and seismic loads, including those that occur du...

    Authors: Ahmed Abdelaal and Ahmed Youssef
    Citation: Journal of Engineering and Applied Science 2023 70:146
    Content type: Research Published on:

  11. Increasing the quality and productivity of machined components are the main issues of machining operations in metalworking industries. The copper alloys CuZr and CuCrZr generally find applications for current-...

    Authors: Aklilu Getachew Tefera, Devendra Kumar Sinha and Gaurav Gupta
    Citation: Journal of Engineering and Applied Science 2023 70:145
    Content type: Research Published on:

  13. Fault propagation is a common occurrence in traction drive control systems. The propagation of faults among components creates difficulties in traceability. Therefore, this paper focuses on the traction transm...

    Authors: Jintian Yin, Zhilong He, Li Liu, Wu Shao, Hui Li and Dabing Sun
    Citation: Journal of Engineering and Applied Science 2023 70:143
    Content type: Research Published on:

  14. Recycling plastic waste in construction applications is a common concept for innovative concrete development. Enormous studies have been conducted for the past three decades. Yet, there is a need in understand...

    Authors: Noor Azline M. N., Byron K. N., Farah Nora Aznieta A. A. and Ernaleza M.
    Citation: Journal of Engineering and Applied Science 2023 70:142
    Content type: Reviews Published on:

  15. Channel plasmonic polariton (CPP) waveguides are a promising technology for integrated photonics. They offer several advantages over other plasmonic waveguides and are well-suited for various applications. In ...

    Authors: Saja Imad, Riyadh Mansoor, Rasha Ali and Fras Hussain
    Citation: Journal of Engineering and Applied Science 2023 70:141
    Content type: Research Published on:

  16. In the field of electronics thermal management (TM), there has already been a lot of work done to create cooling options that guarantee steady-state performance. However, electronic devices (EDs) are progressi...

    Authors: Amol R. Dhumal, Atul P. Kulkarni and Nitin H. Ambhore
    Citation: Journal of Engineering and Applied Science 2023 70:140
    Content type: Reviews Published on:

  17. Expert systems are computer programs that use knowledge and reasoning to solve problems typically solved by human experts. Expert systems have been used in medicine to diagnose diseases, recommend treatments, ...

    Authors: Eslam M. Mustafa, Mahmoud M. Saad and Lydia Wahid Rizkallah
    Citation: Journal of Engineering and Applied Science 2023 70:139
    Content type: Research Published on:

  18. In a recent development, attention has shifted to the application of artificial intelligence for the optimization of wastewater treatment processes. This research compared the performances of the machine learn...

    Authors: Prosper Eguono Ovuoraye, Victor Ifeanyi Ugonabo, Endrit Fetahi, Ahmad Chowdhury, Mohammad Abdullah Tahir, Chinenye Adaobi Igwegbe and Mohammad Hadi Dehghani
    Citation: Journal of Engineering and Applied Science 2023 70:138
    Content type: Research Published on:

  19. In a short-pulse CO2 laser based on discharge excitation, there is a pulse tail that depends on the device configuration and operating conditions. The pulse tail is longer than the spike pulse and causes thermal ...

    Authors: Kazuyuki Uno, Yasushi Kodama and Kazuyuki Yoneya
    Citation: Journal of Engineering and Applied Science 2023 70:137
    Content type: Research Published on:

  20. The approach channel is intended to divert the flow safely from its original course and the diversion may be intended towards spillway, power intake or any other hydraulic structure. The hydraulic design of th...

    Authors: Vankayalapati S. Ramarao, Mutukuru G. Muni Reddy and Kanhu C. Sahu
    Citation: Journal of Engineering and Applied Science 2023 70:136
    Content type: Research Published on:

  21. In view of the limited precision of traditional point cloud registration methods in bridge engineering, as well as the lack of intuitive guidance for bridge construction control regarding relative coordinate r...

    Authors: Xiaojun Deng, Shaorui Wang, Yanghao Zhuang, Yonghui Fan and Yin Zhou
    Citation: Journal of Engineering and Applied Science 2023 70:135
    Content type: Research Published on:

  22. Using groundnut shell ash (GSA) as a component in concrete mixtures is a viable approach to achieving sustainability in building practices. This particular kind of concrete has the potential to effectively mit...

    Authors: Navaratnarajah Sathiparan and Pratheeba Jeyananthan
    Citation: Journal of Engineering and Applied Science 2023 70:134
    Content type: Research Published on:

  23. This paper presents an innovative nonlinear PID control scheme based on a modified nondominated sorting genetic algorithm validated using a laboratory helicopter model called the Twin Rotor System. The concept...

    Authors: J. Sivadasan and J. Roscia Jeya Shiney
    Citation: Journal of Engineering and Applied Science 2023 70:133
    Content type: Research Published on:

  24. Wireless power transfer (WPT) has become an increasingly popular technology for charging electronic devices wirelessly. One of the key challenges in WPT is increasing efficiency and reducing different losses i...

    Authors: Ankur Yadav and Tushar Kanti Bera
    Citation: Journal of Engineering and Applied Science 2023 70:132
    Content type: Research Published on:

  25. An experimental study on the optimal gas turbine inlet air filtration system performance for offshore applications is presented. The objective is to conduct a comparative real-time data analysis for an offshor...

    Authors: Samuel O. Effiom, James A. Ajor, Precious-Chibuzo O. Effiom, Isuamfon Edem, Paschal Ubi, Fidelis Abam and Ogheneruona E. Diemuodeke
    Citation: Journal of Engineering and Applied Science 2023 70:131
    Content type: Research Published on:

  27. The distribution transformers are one of the most important elements for the operation of the distribution networks, considering their quantity and dispersion in the network, and that the failures cause great ...

    Authors: Eduardo Sierra Gil, José Eduardo Montejo Sivilla, Amaury Sedano González and Yaíma Filiberto Cabrera
    Citation: Journal of Engineering and Applied Science 2023 70:129
    Content type: Research Published on:

  28. The extent and occurrence of extremely low-flow events are necessary to determine the minimum river flow. Since the true probability distribution is usually not known, the best fitting distribution function de...

    Authors: Darara Dabtara Bayana and Bikila Gedefa Diriba
    Citation: Journal of Engineering and Applied Science 2023 70:128
    Content type: Research Published on:

  29. The study focuses on computing the optimized foot profile for a walking leg mechanism using artificial neural network (ANN), genetic algorithm, and regression approaches. The technique adopted in this work is ...

    Authors: Raghavendra Bommanahalli Venkatagiriyappa, Anandkumar R. Annigeri and Jogipalya Shivananjappa Srikantamurthy
    Citation: Journal of Engineering and Applied Science 2023 70:127
    Content type: Research Published on:

  30. In order to achieve proper water consumption efficiency in micro-irrigation systems, the space and flow rate of the drippers should match the hydraulic characteristics of the soil and the time and amount of pl...

    Authors: Rouhallah Fattahi Nafchi, Milad Valiyari-Eskandari, Hamid Raeisi Vanani, Kaveh Ostad-Ali-Askari and Abbas Bahrami
    Citation: Journal of Engineering and Applied Science 2023 70:126
    Content type: Reviews Published on:

  31. This study aims to identify Padma Bridge’s impact on Barisal Division’s transportation system. Through an extensive literature analysis, a total of 19 impact factors have been identified. A questionnaire was f...

    Authors: Md. Mohaimenul Islam Sourav, Sayma Afnanin and Mohammed Russedul Islam
    Citation: Journal of Engineering and Applied Science 2023 70:125
    Content type: Research Published on:

  32. Aluminium MMCs are among the many metal composites and are regarded as progressive engineering materials in numerous industries because of their advantages compared to standard aluminium alloy. Among the reinf...

    Authors: Sharath Ballupete Nagaraju, Madhu Kodigarahalli Somashekara, Pradeep Dyavappanakoppalu Govindaswamy, Madhu Puttegowda, Premkumar Bagade Girija Shankar and Karthik Sathyanarayana
    Citation: Journal of Engineering and Applied Science 2023 70:124
    Content type: Research Published on:

  33. Operating speed models help assess and evaluate geometric design consistency along successive road segments. The development of operating speed models has been mostly focused on rural two-lane two-way highways...

    Authors: Dalia Said, Fady Reyad and Hoda Talaat
    Citation: Journal of Engineering and Applied Science 2023 70:123
    Content type: Research Published on:

  34. Heart diseases are consistently ranked among the top causes of mortality on a global scale. Early detection and accurate heart disease prediction can help effectively manage and prevent the disease. However, t...

    Authors: Anil Pandurang Jawalkar, Pandla Swetcha, Nuka Manasvi, Pakki Sreekala, Samudrala Aishwarya, Potru Kanaka Durga Bhavani and Pendem Anjani
    Citation: Journal of Engineering and Applied Science 2023 70:122
    Content type: Research Published on:

  35. Currently, hybridization of natural-synthetic fibers within a polymeric matrix has received wide attention owing to its promising properties. This study investigated the mechanical properties of interply and i...

    Authors: Maysam A. Altaee and Nawras H. Mostafa
    Citation: Journal of Engineering and Applied Science 2023 70:121
    Content type: Research Published on:

  36. The objective of this study is to propose a method called the fuzzy technique for order preference by similarity to the ideal solution (F-TOPSIS) to select parameters of the wire electrical discharge machining...

    Authors: Babatunde Alade Sawyerr, Ebun Fasina, Wasiu Oyediran Adedeji, Mofoluso Kehinde Adeniran, Sunday Ayoola Oke and John Rajan
    Citation: Journal of Engineering and Applied Science 2023 70:120
    Content type: Research Published on:

    The Correction to this article has been published in Journal of Engineering and Applied Science 2023 70:130

  38. Monitoring of water intake is critical for managing the health and wellness of individuals with various health conditions, including young children, sick adults, the elderly, and individuals seeking better wei...

    Authors: E. A. Hassan and A. A. Morsy
    Citation: Journal of Engineering and Applied Science 2023 70:118
    Content type: Research Published on:

  39. This study is focused on fabrication of Hybrid Al6061/SiC + TiB2 MMC by stir casting process, primarily to study the effect of two different reinforcement particles on mechanical properties and microstructure. Ad...

    Authors: Nilesh Kumar and Jatinder Kumar
    Citation: Journal of Engineering and Applied Science 2023 70:117
    Content type: Research Published on:

  40. Closed-loop identification of multi-input multi-output (MIMO) systems in large-scale plants has significant difficulties due to subsystem interactions. This complexity is attributed to several input‒output var...

    Authors: Mohamed A. Rahim
    Citation: Journal of Engineering and Applied Science 2023 70:116
    Content type: Research Published on:

  41. Slab track is a recent technology used to cope up with the train high axle loads and speed, it has replaced the ballast material in classical ballasted track with either reinforced concrete slab or asphalt lay...

    Authors: Mohamed Hafez Fahmy Aly, Islam Mahmoud Abou El-Naga, Ahmed Abdul Hay Soliman and Muhammad Ahmad Diab
    Citation: Journal of Engineering and Applied Science 2023 70:115
    Content type: Research Published on:

  42. This study focuses on enhancing indoor air quality and thermal comfort in indoor swimming pool facilities through the investigation of ventilation system configurations. Creating a comfortable and healthy envi...

    Authors: Ahmed M. Hanafi, Mohamed A. Ibrahim, Taher M. Abou-deif and Samy M. Morcos
    Citation: Journal of Engineering and Applied Science 2023 70:114
    Content type: Research Published on:

  44. Lower energy consumption while preserving the required light brightness is one of the main purposes of changing from an HPSV lighting system to a LED lighting system for road lighting. The current practice of ...

    Authors: Mohd Hanif Jamaludin, Wan Zakiah Wan Ismail, Elina Mohd Husini and Nor Ain Mohd Bahror
    Citation: Journal of Engineering and Applied Science 2023 70:112
    Content type: Research Published on:

  45. Induction heating offers numerous advantages over conventional methods for heating high-pressure fluids in hydraulic testing applications. It simplifies complex processes, mitigates the risks associated with h...

    Authors: Tom Thampy, Emmanuel Gospel Raj Rivington, Madan Mohan Avulapati and Niroop Srinivasa Murthy
    Citation: Journal of Engineering and Applied Science 2023 70:111
    Content type: Research Published on:

  46. A closed-form solution of the triangular porous fin with a simultaneous variation of power law-dependent heat transfer coefficient, internal heat generation, and surface emissivity parameters under the influen...

    Authors: Pranab Kanti Roy and Joy Prakash Das
    Citation: Journal of Engineering and Applied Science 2023 70:110
    Content type: Research Published on:

  47. In the context of Industry 4.0, which prioritizes intelligent and efficient solutions for industrial systems, this paper introduces an innovative methodology for fault detection and fault-tolerant control of D...

    Authors: Abolghasem Sardashti and Jamal Nazari
    Citation: Journal of Engineering and Applied Science 2023 70:109
    Content type: Research Published on:

  48. This paper aims to present the structural design and the rehabilitation process as well as the site assessment of the reconstruction and rehabilitation of the twelfth-century Grand Al-Nouri Mosque in Al-Nouri ...

    Authors: Mohamed Gamal Aboelhassan, Ahmed Mokhtar Tarabia and Sherif Farag Hassan
    Citation: Journal of Engineering and Applied Science 2023 70:108
    Content type: Research Published on:

  49. Ultra-high performance concrete (UHPC) benefits the construction industry due to its improved flexibility, high workability, durability, and performance compared to normal concrete. Some investigators have con...

    Authors: Nana Gong and Naimin Zhang
    Citation: Journal of Engineering and Applied Science 2023 70:107
    Content type: Research Published on:

  50. In Egypt, basalt manufacturing generates waste materials at a rate of about 33%. The disposal of basalt waste through the manufacturing of cementitious materials is an economically feasible approach. This work...

    Authors: Hani A. Mashout, Taha A. Razek, Mohamed S. Amin, Fayza S. Hashem and Faten A. Selim
    Citation: Journal of Engineering and Applied Science 2023 70:106
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions