Skip to main content

Articles

Page 1 of 8

  1. A solid substance encircled by a three-dimensional network of voids not interconnected with each other is referred to as close-cell metal foam. The work is based on enhancing mechanical properties of aluminum ...

    Authors: Ankur Bisht, Brijesh Gangil, Lalit Ranakoti and Surya Prakash Gairola
    Citation: Journal of Engineering and Applied Science 2024 71:50
  2. Electric vehicles (EVs) are rapidly replacing conventional fuel vehicles, offering powerful, emission-free performance. This paper introduces an innovative three-phase bidirectional charger for grid-to-vehicle...

    Authors: J. V. G. Rama Rao and S. Venkateshwarlu
    Citation: Journal of Engineering and Applied Science 2024 71:49
  3. In recent years, the Egyptian demographic has changed with an increasing number of older citizens who require special attention. The World Health Organization (WHO) identified 2020–2030 as the “Decade of Healt...

    Authors: Nourhan Mohamed Abd Elaziz and Kariman Ahmed Shawky
    Citation: Journal of Engineering and Applied Science 2024 71:47
  4. Soil-steel composite bridges (SSCBs) use the surrounding soil and the culvert’s flexible corrugated steel thin plates to support vertical loads above the culvert. Existing codes use empirical equations based o...

    Authors: Nashwa Nabil Soliman, Sherif Adel Yahia Akl, Ahmed Hosny Abdel Rahman and Sherif Ahmed Mourad
    Citation: Journal of Engineering and Applied Science 2024 71:46
  5. The urbanization of cities, the corroding of green areas, and the increasing demand for electric energy lead to the formation of heat islands in cities and the appearance of the global climate change phenomenon.

    Authors: Heba Fouad, Ayman H. Mahmoud and Rania Rushdy Moussa
    Citation: Journal of Engineering and Applied Science 2024 71:45
  6. The compressive strength (CS) of ultra-high-performance concrete (UHPC) hinges upon the distinct properties, quantities, and types of its constituent materials. To empirically decipher this intricate relations...

    Authors: Runmiao Zhou, Yuzhe Tang, Hongmei Li and Zhenni Liu
    Citation: Journal of Engineering and Applied Science 2024 71:43
  7. Owing to the rapid increase in the demands of train speed and axle loads, the slab track has been introduced to replace the ballast in the classical ballasted track with reinforced concrete slab or asphalt-bea...

    Authors: Mohamed Hafez Aly, Islam Mahmoud Abou Elnaga, Ahmed Abdul Hay Soliman and Muhammad Ahmad Diab
    Citation: Journal of Engineering and Applied Science 2024 71:42
  8. In the last few years, multimedia technology has made tremendous strides. These days, the Web is frequently used to transfer multimedia content, including audio, video, and photos. However, the Internet is a v...

    Authors: B. Sakthi Kumar and R. Revathi
    Citation: Journal of Engineering and Applied Science 2024 71:41
  9. Hybrid combiner and precoder architectures, radio frequency (RF) chain, analog phase shifters, digital-to-analog converter (DAC), and analog-to-digital converter (ADC) are components of a millimeter wave cellu...

    Authors: Akeem Abimbola Raji, Joseph Folorunso Orimolade, Kamoli Akinwale Amusa and Isaiah Adediji Adejumobi
    Citation: Journal of Engineering and Applied Science 2024 71:40
  10. Manufacturers are facing challenges in achieving high productivity and quality in manufacturing through machining. PVD-coated tools can control several machining challenges by enhancing hardness and abrasion r...

    Authors: Dillip Kumar Mohanta, Bidyadhar Sahoo and Ardhendu Mouli Mohanty
    Citation: Journal of Engineering and Applied Science 2024 71:38
  11. To achieve sustainable development, it is imperative that we find ways to manage sand resources wisely. One approach to mitigate the impact of sand extraction is the recycling of construction demolition waste ...

    Authors: Poleboyana Rohit, T. D. Gunneswara Rao and M. Chandrasekhar
    Citation: Journal of Engineering and Applied Science 2024 71:37
  12. The surge in online activities has led to the increasing popularity of sharing video data across diverse applications, including online education tutorials, social networking, video calling, and OTT platforms....

    Authors: Sweta Kumari, Mohit Dua, Shelza Dua and Deepti Dhingra
    Citation: Journal of Engineering and Applied Science 2024 71:36
  13. The number and variety of paints and coating systems in the automotive industry have increased in recent years. However, the basic requirement for the quality of the paints still depends on the surfaces on whi...

    Authors: Carsten Engler, Anthimos Georgiadis, Dirk Lange and Nicolas Meier
    Citation: Journal of Engineering and Applied Science 2024 71:35
  14. An important goal in a number of optimization studies is a high-quality weld joint. Thermal analysis of AISI 1020 low carbon steel plate agglutinated by gas tungsten arc welding technique was carried out using...

    Authors: Michael Okon Bassey, Jephtar Uviefovwe Ohwoekevwo and Aniekan Essienubong Ikpe
    Citation: Journal of Engineering and Applied Science 2024 71:33
  15. The use of CNG auto-rickshaws is increasing in Dhaka, the capital of Bangladesh. CNG auto rickshaws are a crucial component of the transportation system of Dhaka City. These offer the dwellers a quick and affo...

    Authors: Md Sakibus Salehin, Tahia Jubailee, Md. Mohaimenul Islam Sourav, Sayma Afnanin and Shah Md Muniruzzaman
    Citation: Journal of Engineering and Applied Science 2024 71:32
  16. In this paper, we apply two methods for solving nonlinear system of fractional differential equations (FDEs); these two methods are Picard and Adomian decomposition methods (ADM). The type of fractional deriva...

    Authors: Eman A. A. Ziada
    Citation: Journal of Engineering and Applied Science 2024 71:31
  17. This study delves into optimizing nanoparticle attributes to enhance the anti-wear performance of nano-lubricants, specifically exploring the influence of nanoparticle material hardness and concentration. Inve...

    Authors: Trishul Kulkarni, Bhagwan Toksha and Arun Autee
    Citation: Journal of Engineering and Applied Science 2024 71:30
  18. Requirements elicitation is one of the fundamental sub-processes of requirements engineering which is used to find the needs of stakeholders. There are several activities in this sub-process, i.e., identificat...

    Authors: Faiz Akram, Tanvir Ahmad and Mohd. Sadiq
    Citation: Journal of Engineering and Applied Science 2024 71:29
  19. A sulfur recovery process is one of the most important processes in the oil and gas industry to get rid of hydrogen sulfide (H2S) which is produced from the acid gas removal process of sour natural gas to convert...

    Authors: Mahmoud Farag Abdel Hamid, Tarek M. Aboul-Fotouh and Masoud A. El-Shafie
    Citation: Journal of Engineering and Applied Science 2024 71:27
  20. In ophthalmology, early fundus screening is an economical and effective way to prevent blindness from eye diseases. Because clinical evidence does not exist, manual detection is time-consuming and may cause th...

    Authors: Rupali Chavan and Dnyandeo Pete
    Citation: Journal of Engineering and Applied Science 2024 71:26
  21. The utilization of natural fiber-reinforced polymer composite has received greater attention in various fields due to its recyclability; inexpensive, nonabrasive, specific properties; light-weight, naturally d...

    Authors: A. V. Kiruthika
    Citation: Journal of Engineering and Applied Science 2024 71:24
  22. In the architectural, engineering, and construction industry, poor visualization of construction processes and lack of information exchange between different work teams can lead to poor performance. To address th...

    Authors: Rania Mohsen Aziz, Tark Ibrahim Nasreldin and Omnia Mamdouh Hashem
    Citation: Journal of Engineering and Applied Science 2024 71:23
  23. Numerous studies have substantiated the substantial impact of COVID-19 on metro travel, which is expected to gradually recover once the pandemic is controlled. Given the potentially more severe repercussions o...

    Authors: Jiandong Peng, Xue Luo, Shiyi Guo, Yiwen Hu, Qi Dai and Hong Yang
    Citation: Journal of Engineering and Applied Science 2024 71:22
  24. Around 50 million individuals worldwide suffer from epilepsy, a chronic, non-communicable brain disorder. Several screening methods, including electroencephalography, have been proposed to identify epileptic e...

    Authors: Pankaj Kunekar, Mukesh Kumar Gupta and Pramod Gaur
    Citation: Journal of Engineering and Applied Science 2024 71:21
  25. The categorization of public buildings is such that it covers all buildings that are accessible to the public; however, many public buildings that are either fully or partially privately owned usually undergo ...

    Authors: Olatunde Folaranmi Adedayo, Ayomide Taiwo Ale, Nasir Muhammad Yahaya-Loko and Victor Samuel Adekunle
    Citation: Journal of Engineering and Applied Science 2024 71:20
  26. A coronavirus family is a diverse group of many viruses. Coronavirus disease 19 (COVID-19) spreads when an infected person breathes out droplets and very small particles that contain the virus. These droplets ...

    Authors: Mennatullah ElShimi, Samy M. Morcos, Galal M. Mostafa, Essam E. Khalil, Gamal A. El-Hariry and Ahmed ElDegwy
    Citation: Journal of Engineering and Applied Science 2024 71:19
  27. The unceasing utilization of diesel oil, the regular base fluid, as the base fluid of drilling mud has brought about severe ecological worries and regulation because of its poisonousness, non-biodegradability,...

    Authors: Damilola Deborah Olaniyan and Akintola A. Sarah
    Citation: Journal of Engineering and Applied Science 2024 71:17
  28. This manuscript explores the capability of topological data analysis (TDA) based on homology theory (HT: a subfield of algebraic topology) to extract relevant information for recognition of confusing Arabic ma...

    Authors: Djamel Bouchaffra and Faycal Ykhlef
    Citation: Journal of Engineering and Applied Science 2024 71:16
  29. This paper presents a groundbreaking method for predicting the compressive strength (Fc) of recycled aggregate concrete (RAC) through the application of K-nearest neighbors (KNN) analysis. The task of designing m...

    Authors: Min Duan
    Citation: Journal of Engineering and Applied Science 2024 71:15
  30. The drill tail of a rock drill meets high-frequency fretting in both the rotational and axial axes. The pure water seal is prone to damage and failure owing to its difficult working features and the low viscos...

    Authors: Chunqiang Jia, Aofei Wang, Li Zong and Ling Yu
    Citation: Journal of Engineering and Applied Science 2024 71:14
  31. This paper studies the performance and reliability of deep learning-based speaker recognition schemes under various recording situations and background noise presence. The study uses the Speaker Recognition Da...

    Authors: Omar Ratib Khazaleh and Leen Ahmed Khrais
    Citation: Journal of Engineering and Applied Science 2024 71:13
  32. The diagnosis of faults in grid-connected photovoltaic (GCPV) systems is a challenging task due to their complex nature and the high similarity between faults. To address this issue, we propose a wrapper appro...

    Authors: Amal Hichri, Mansour Hajji, Majdi Mansouri, Hazem Nounou and Kais Bouzrara
    Citation: Journal of Engineering and Applied Science 2024 71:12
  33. Fused deposition modelling (FDM) is a popular additive manufacturing technique with capability of producing complex and integrate shapes. One of the critical aspects of FDM is the dimensional accuracy of 3D (t...

    Authors: Thoudam Kheljeet Singh, Anil Kumar Birru and Khundrakpam Nimo Singh
    Citation: Journal of Engineering and Applied Science 2024 71:10
  34. The greatest advantages of wireless power transfer (WPT) are its absence of severe environmental hazards, its portability, and its independence from other factors. The wireless charging system for electric veh...

    Authors: Obulesu Dakka, Sridhar Patthi, J. V. G. Rama Rao and Parveen Kumar
    Citation: Journal of Engineering and Applied Science 2024 71:7
  35. The extension of classical fuzzy sets are hesitant fuzzy sets (HFSs), in which each element has a possible value from [0,1]. Similarity and distance measures are useful implements for solving medical, clusteri...

    Authors: Rakhi Gupta and Satish Kumar
    Citation: Journal of Engineering and Applied Science 2024 71:5
  36. Rapid technological advances have made daily life easier and more convenient in recent years. As an emerging technology, the Internet of Things (IoT) facilitates interactions between physical devices. With the...

    Authors: Xiao Liu and Yun Deng
    Citation: Journal of Engineering and Applied Science 2024 71:4
  37. This study presents an enhanced envelope detection technique implemented on a field-programmable gate array (FPGA) to diagnose bearing faults in rotating machinery. Bearing faults frequently result in machiner...

    Authors: Mohamed Rebiai, Billel Bengharbia, Mohamed Maazouz and Yassine Toumi
    Citation: Journal of Engineering and Applied Science 2024 71:3
  38. A non-linear mathematical model of underactuated airship is derived in this paper based on Euler-Newton approach. The model is linearized with small disturbance theory, producing a linear time varying (LTV) mo...

    Authors: Mohamed Atyya, Gamal M. ElBayoumi and Mohamed Lotfy
    Citation: Journal of Engineering and Applied Science 2024 71:2

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2022 Speed
7 days submission to first editorial decision for all manuscripts (Median)
108 days submission to accept (Median)

2022 Usage 
157,076 downloads
20 Altmetric mentions