Skip to main content

Articles

Page 1 of 9

  1. The traditional electrical grid has to be digitally improved as digitalization and effective integration of renewable energy bring better efficiency, intelligence, and safety into the grid; hence, the transiti...

    Authors: Priscilla Oyeladun Ajiboye, Kwame Opuni-Boachie Obour Agyekum and Emmanuel Asuming Frimpong
    Citation: Journal of Engineering and Applied Science 2024 71:91
  2. Superalloy Inconel718 is an important material for aircraft preparation because of its excellent performance at high temperatures. However, when cutting Inconel718, a large amount of cutting heat will be gener...

    Authors: Xin Liu, Xiaoliang Lin, Xiaowei Jia, Yueyang Li and Changfeng Shao
    Citation: Journal of Engineering and Applied Science 2024 71:90
  3. Recent sustainable building strategies make the right decisions to be environmentally friendly and reduce carbon emissions. In some reinforced concrete (RC) elements, fiber-reinforced polymer (FRP) bars have b...

    Authors: Marwan Abdo, Basem Abdelwahed and Salah El-Metwally
    Citation: Journal of Engineering and Applied Science 2024 71:89
  4. Many irrigation schemes are performing poorly for a number of reasons, and this should be improved to increase the efficiency and productivity of the schemes. This study attempted to determine the performance ...

    Authors: Mulugeta Abebo Abo, Shemelies Assefa and Abraham W/Michael
    Citation: Journal of Engineering and Applied Science 2024 71:88
  5. In the pursuit of cost reduction and enhanced construction efficiency in the mechanical connection of reinforcing bars within precast assembled concrete structures, a novel-reinforcing bar connection joint is ...

    Authors: Dongdong Li, Tongheng Tu, Xiuli Yang, Maolin Cheng and Hao Xiao
    Citation: Journal of Engineering and Applied Science 2024 71:87
  6. This study examined the issues of wellbore instability encountered during the drilling of the vertical exploration Al-Rateena-1 well, Block 25D, Al-Rawat Field, Sudan. Measurements of the wellbore diameter rev...

    Authors: Ahmed Abdelaziz Ibrahim Elrayah
    Citation: Journal of Engineering and Applied Science 2024 71:86
  7. The unconfined compressive strength (UCS) of stabilized soil with lime and cement is a crucial mechanical factor in developing accurate geomechanical models. In the past, determining UCS required laborious lab...

    Authors: Weiqing Wan
    Citation: Journal of Engineering and Applied Science 2024 71:84
  8. Egypt’s urban communities face many threats, including, pluvial floods, heat waves, and lack of publicly accessible urban green spaces. Nature-based solutions such as constructed wetlands (CWs) present a promi...

    Authors: Nouran Moustafa Mohamed, Abdullah Farouk Al-Attar, Yomna Amr Lotfi and Hesham Mohamed El-Barmelgy
    Citation: Journal of Engineering and Applied Science 2024 71:82
  9. Vegetable oils are a highly promising alternative to produce various lubricants, owing to their biodegradability and eco-friendliness. In comparison to mineral oil, these oils possess a higher flash point and ...

    Authors: M. A. Prasanth, S. Rani, S Prathap Singh, D. Elil Raja and Praveen Barmavatu
    Citation: Journal of Engineering and Applied Science 2024 71:80
  10. Deep shale gas development has great potential, but the frequent occurrence of shale gas well casing change problems triggered by geological factors seriously restricts deep shale gas development. In order to ...

    Authors: Youzhi Zheng, Jun Zhao, Xihui Hu, Zhilin Li, Zhanwu Zhang, Ziming Guo, Yu He, Lang He, Yong Chen and Yi Xie
    Citation: Journal of Engineering and Applied Science 2024 71:79
  11. Magnesium fuel cells deliver higher electrical power output than lithium-ion batteries and have the potential to become an economically attractive alternative power source for domestic purposes. In place of no...

    Authors: R. Jayakrishnan, Aruna Raj, Akhil M. Anand, P C Harikrishnan and Athira Ayyappan
    Citation: Journal of Engineering and Applied Science 2024 71:78
  12. This study proposes a modification for the current design approach for square and rectangular silos that accounts for silos’ wall flexibility. First, the authors investigated the effect of wall stiffness symbo...

    Authors: Mohamed H. Abdelbarr, Osman M. O. Ramadan, AlHussein Hilal, A. M. Sanad and Hany A. Abdalla
    Citation: Journal of Engineering and Applied Science 2024 71:77
  13. This paper thoroughly explores the role of object detection in smart cities, specifically focusing on advancements in deep learning-based methods. Deep learning models gain popularity for their autonomous feat...

    Authors: Jiya Tian, Qiangshan Jin, Yizong Wang, Jie Yang, Shuping Zhang and Dengxun Sun
    Citation: Journal of Engineering and Applied Science 2024 71:76
  14. Rapid-hardening concrete (RHC) is becoming more popular as a cast-in-place jointing material in precast concrete bridges and buildings due to its high tensile strength and crack resistance. RHC’s technical pro...

    Authors: Mohamed Hussein Elfakhrany, Amal Zamrawi, Wael Ibrahim and Alaa Sherif
    Citation: Journal of Engineering and Applied Science 2024 71:74
  15. The disposal of magnesite mine tailings (MMT), a by-product of magnesite mining, raises significant environmental concerns due to its adverse effects on soil, water and air quality. Likewise, the improper disp...

    Authors: Vinodhkumar Shanmugasundaram, Aravind Eswaran, Arulraj Pandiyan and Shreeramsundhar Ramakrishnan
    Citation: Journal of Engineering and Applied Science 2024 71:72
  16. Early location of melanoma, a dangerous shape of skin cancer, is basic for patients. Indeed, for master dermatologists, separating between threatening and generous melanoma could be a troublesome errand. Surgi...

    Authors: Manikandan Rajagopal, Shubhangi N. Ghate, Rajeswari P and E. N. Ganesh
    Citation: Journal of Engineering and Applied Science 2024 71:71
  17. The challenge of urban growth and land use land cover (LULC) change is particularly critical in developing countries. The use of remote sensing and GIS has helped to generate LULC thematic maps, which have pro...

    Authors: Nishant Mehra and Janaki Ballav Swain
    Citation: Journal of Engineering and Applied Science 2024 71:70
  18. In this work, epoxy nanocomposite was prepared with the inclusion of unfunctionalized as-received GNPs (ARGNPs) and functionalized GNPs using surfactant Tween 80 (T80GNPs) in the epoxy resin using a mechanical...

    Authors: Wan Zateel Aqmaer Wan Ab Halim, Ramli Junid, Norazliane Sazali, Januar Parlaungan Siregar, Jeefferie Abd Razak, Deni Fajar Fitriyana, Tezara Cionita and Jamiluddin Jaafar
    Citation: Journal of Engineering and Applied Science 2024 71:69
  19. The influence of risky driving behavior on road traffic accidents (RTAs) is a relationship that requires draconian measures to curtail the rising surge of road traffic accidents among commercial drivers. Any a...

    Authors: Olusegun Austine Taiwo, Norashikin Mahmud, Sitti Asmah Hassan and Rahmat Bin Mohsin
    Citation: Journal of Engineering and Applied Science 2024 71:68
  20. This paper presents priority support in the Internet of Things to support the reliable and timely transmission of messages during emergencies. The Message Queuing Telemetry Transport protocol is a widely used ...

    Authors: P S Akshatha, S Divyashree and S M Dilip Kumar
    Citation: Journal of Engineering and Applied Science 2024 71:67
  21. This study presents a biosensor working at a frequency of 3.5 GHz, which is designed as a square ring metamaterial resonator. This study aimed to evaluate the impact of blood amount on the metamaterial-based r...

    Authors: Muhammad Hakimi Mustafa Kamal, Suhail Asghar Qureshi, Zuhairiah Zainal Abidin, Huda A. Majid and Chan Hwang See
    Citation: Journal of Engineering and Applied Science 2024 71:66
  22. Informal areas are considered one of the biggest urban problems worldwide; it was estimated in 2018 that 29% of the world’s urban population lived in informal areas (The world bank, Population living in slums,...

    Authors: Maha Mohamed Elgohary, Ahmed Reda Abdin and Heba Allah E. Khalil
    Citation: Journal of Engineering and Applied Science 2024 71:65
  23. The large-scale mining of magnesite generates substantial quantities of magnesite mine tailings (MMT), which pose a significant threat to soil, water, and air quality. Utilising cement-treated MMT as a subgrad...

    Authors: Vinodhkumar Shanmugasundaram, Balaji Shanmugam, Ponnusamy Kulanthaivel and Mukesh Thottipalayam Shakthivel
    Citation: Journal of Engineering and Applied Science 2024 71:64
  24. Digital image processing is used to create an optical extensometer to measure deformation in materials under quasi-static loading. The optical extensometer setup created in the present work is a single camera ...

    Authors: Ivan Miskdjian, Hossam Hodhod, Mostafa Abdeen and Mohamed Elshabrawy
    Citation: Journal of Engineering and Applied Science 2024 71:63
  25. The Saoner mine reclamation study conducted in Maharashtra, India, meticulously investigates the practicality and efficacy of ecological restoration initiatives post-mining operations. Employing multifaceted r...

    Authors: Debasmita Basu and Smriti Mishra
    Citation: Journal of Engineering and Applied Science 2024 71:62
  26. The surge in energy storage systems and the increasing involvement of demand-side participation can be attributed to their favorable characteristics, including their seamless integration into electrical networ...

    Authors: Yizhao Peng and Yingmin Zhang
    Citation: Journal of Engineering and Applied Science 2024 71:61
  27. Titanium and its alloys exhibit a favorable integration of characteristics, including notable strength and high resistance to corrosion. However, they are deficient in terms of wear resistance and thermal cond...

    Authors: Dhanunjay Kumar Ammisetti, S. S. Harish Kruthiventi, Sankararao Vinjavarapu, Nelakuditi Naresh Babu, Jaya Raju Gandepudi and Sudheer Kumar Battula
    Citation: Journal of Engineering and Applied Science 2024 71:60
  28. Diesel oil contamination is a threat to environment and human health. Many technologies have been developed to address this issue; however, they are costly to be deployed in real-world oil remediation. Adsorpt...

    Authors: Jefrick Jun Daniel T. Urgel, Justin Marwin A. Briones, Emmanuel B. Diaz Jr., Kirstin Margaux N. Dimaculangan, Kayla L. Rangel and Edgar Clyde R. Lopez
    Citation: Journal of Engineering and Applied Science 2024 71:59
  29. In the recent development of high-performance gas turbine engine, there is a tendency to design the cooling holes in order to improve the heat transfer and cooling efficiency. Titanium alloy is the most prefer...

    Authors: Ashish Pawar, Dinesh Kamble and D. B. Jadhav
    Citation: Journal of Engineering and Applied Science 2024 71:58
  30. This project covers the investigation of the boundary layer flow of a hybrid nanofluid past a biaxial stretching/shrinking sheet. The hybrid nanofluid consists of copper (Cu) and alumina ( ...

    Authors: Mohammad Ferdows, MD. Shamshuddin, Ahmed Mohammed Rashad, Md Gulum Murtaza and Sulyman Olakunle Salawu
    Citation: Journal of Engineering and Applied Science 2024 71:57
  31. The effects of inhibitor concentration on the corrosion rate and inhibition efficiency of AISI 1020 steel in an acidic and alkaline environment were investigated by means of weight loss measurement at an inter...

    Authors: Masalina Md Ali, Muhammad Amir Mat Shah, Siti Khadijah Alias, Hazriel Faizal Pahroraji, Bulan Abdullah, Haryana Mohd Hairi and Azizul Hakim Shamsudin
    Citation: Journal of Engineering and Applied Science 2024 71:56
  32. There has been an increase in research over the past decades into the use of environmentally friendly materials in brake pads, such as natural fibres. This is due to the possibility that natural fibbers could ...

    Authors: Joseph O. Dirisu, Imhade P. Okokpujie, Pepple B. Apiafi, Sunday O. Oyedepo, Lagouge K. Tartibu, Olugbenga A. Omotosho, Emmanuel O. Ogunkolati, Enoch O. Oyeyemi and John O. Uwaishe
    Citation: Journal of Engineering and Applied Science 2024 71:55
  33. To enhance the precision and reliability of road crack detection, this study introduces an innovative neural network architecture. Strategies were implemented to effectively address the issue of overfitting r...

    Authors: Cunge Guo, Wenqi Gao and Dongmei Zhou
    Citation: Journal of Engineering and Applied Science 2024 71:54
  34. A solid substance encircled by a three-dimensional network of voids not interconnected with each other is referred to as close-cell metal foam. The work is based on enhancing mechanical properties of aluminum ...

    Authors: Ankur Bisht, Brijesh Gangil, Lalit Ranakoti and Surya Prakash Gairola
    Citation: Journal of Engineering and Applied Science 2024 71:50
  35. Electric vehicles (EVs) are rapidly replacing conventional fuel vehicles, offering powerful, emission-free performance. This paper introduces an innovative three-phase bidirectional charger for grid-to-vehicle...

    Authors: J. V. G. Rama Rao and S. Venkateshwarlu
    Citation: Journal of Engineering and Applied Science 2024 71:49
  36. In recent years, the Egyptian demographic has changed with an increasing number of older citizens who require special attention. The World Health Organization (WHO) identified 2020–2030 as the “Decade of Healt...

    Authors: Nourhan Mohamed Abd Elaziz and Kariman Ahmed Shawky
    Citation: Journal of Engineering and Applied Science 2024 71:47
  37. Soil-steel composite bridges (SSCBs) use the surrounding soil and the culvert’s flexible corrugated steel thin plates to support vertical loads above the culvert. Existing codes use empirical equations based o...

    Authors: Nashwa Nabil Soliman, Sherif Adel Yahia Akl, Ahmed Hosny Abdel Rahman and Sherif Ahmed Mourad
    Citation: Journal of Engineering and Applied Science 2024 71:46
  38. The urbanization of cities, the corroding of green areas, and the increasing demand for electric energy lead to the formation of heat islands in cities and the appearance of the global climate change phenomenon.

    Authors: Heba Fouad, Ayman H. Mahmoud and Rania Rushdy Moussa
    Citation: Journal of Engineering and Applied Science 2024 71:45
  39. The compressive strength (CS) of ultra-high-performance concrete (UHPC) hinges upon the distinct properties, quantities, and types of its constituent materials. To empirically decipher this intricate relations...

    Authors: Runmiao Zhou, Yuzhe Tang, Hongmei Li and Zhenni Liu
    Citation: Journal of Engineering and Applied Science 2024 71:43
  40. Owing to the rapid increase in the demands of train speed and axle loads, the slab track has been introduced to replace the ballast in the classical ballasted track with reinforced concrete slab or asphalt-bea...

    Authors: Mohamed Hafez Aly, Islam Mahmoud Abou Elnaga, Ahmed Abdul Hay Soliman and Muhammad Ahmad Diab
    Citation: Journal of Engineering and Applied Science 2024 71:42

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions