Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 6 of 10

  1. Establishing new cities and communities to absorb the growth of the population is an urban regime for urban development; especially in developing countries like Egypt. Despite the massive construction done in ...

    Authors: Walid S. Abdeldayem, Sherif Morgan, Sawsan Bakr and Ayman Abdelhamid
    Citation: Journal of Engineering and Applied Science 2023 70:52
    Content type: Research Published on:

  2. This paper investigates the performance of a single and a group of laterally loaded barrettes using a series of numerical models in a three-dimensional finite element software. The simulation of laterally load...

    Authors: Sherif A. Y. Akl, Abdelrahman N. Ismail, Mahmoud Abdelmoghni and Yasser A. Hegazy
    Citation: Journal of Engineering and Applied Science 2023 70:51
    Content type: Research Published on:

  3. A model is presented for shifting the manual intensive manufacturing process of complex biomedical devices towards more lean and efficient production process via application of concepts of cyber physical syste...

    Authors: Bikash Guha, Sean Moore and Jacques M. Huyghe
    Citation: Journal of Engineering and Applied Science 2023 70:50
    Content type: Research Published on:

  5. The impact of the COVID pandemic has resulted in many people cultivating a remote working culture and increasing building energy use. A reduction in the energy use of heating, ventilation, and air-conditioning...

    Authors: Samuel Boahen, Kwadwo Boateng Ofori-Amanfo, Kofi Owura Amoabeng, Godwin Ayetor, George Yaw Obeng, Richard Opoku and Dennis Edem Dzebre
    Citation: Journal of Engineering and Applied Science 2023 70:48
    Content type: Research Published on:

  6. The expanding proliferation of components for engineering applications requires greater optimisation of parameters, which consequently increases the need for more efficient boring practices. The Taguchi Pareto...

    Authors: Ebun Fasina, Babatunde Alade Sawyerr, Yakubu Umar Abdullahi and Sunday Ayoola Oke
    Citation: Journal of Engineering and Applied Science 2023 70:47
    Content type: Research Published on:

  9. In this paper, a safety method for a 3-DOF industrial robot is developed based on recurrent neural network (RNN). Safety standards for human robot interaction (HRI) are taken into accounts. The main objective ...

    Authors: Khaled H. Mahmoud, Abdel-Nasser Sharkawy and G. T. Abdel-Jaber
    Citation: Journal of Engineering and Applied Science 2023 70:44
    Content type: Research Published on:

  10. At the molecular level, the body is composed, on average, of water for 62%, fat for 15%, 17% of protein, and 6% of minerals. In this work, we propose a heuristic methodology using hydration models as a base to...

    Authors: Marco Tannino, Fabio Mangini, Lorenzo Dinia and Fabrizio Frezza
    Citation: Journal of Engineering and Applied Science 2023 70:43
    Content type: Research Published on:

  11. Nowadays, the allocation of electric vehicle charging stations (EVCS) for the charging of electric vehicles (EVs) is essential, as random allocation may cause significant energy loss for the radial distributio...

    Authors: Sayak Mondal, Parimal Acharjee and Aniruddha Bhattacharya
    Citation: Journal of Engineering and Applied Science 2023 70:42
    Content type: Research Published on:

  12. In this paper, opening characteristics of a pneumatically operated valve and methodology for controlling the valve opening duration have been investigated through numerical simulation. The valve has a poppet m...

    Authors: Debanjan Das, Shrey Waghmare, P. Padmanabhan, V. Kumaresan and D. P. Sudhakar
    Citation: Journal of Engineering and Applied Science 2023 70:41
    Content type: Research Published on:

  16. THz radiation detection using FET devices has attracted increasing attention lately. In this paper, we further study a simulated model of FET rectification detection in short channel length. To achieve this, b...

    Authors: Yasmeen A. Mohamed, Nihal Y. Ibrahim, Mohamed Y. F. El Zayat and Salah E. A. Elnahwy
    Citation: Journal of Engineering and Applied Science 2023 70:37
    Content type: Research Published on:

  21. The problem of global warming, along with environmental concerns, has already led governments to replace fossil-fuel vehicles with low-emission electric vehicles (EVs). The energy crisis and environmental prob...

    Authors: Abhinav Srivastava, Munish Manas and Rajesh Kumar Dubey
    Citation: Journal of Engineering and Applied Science 2023 70:32
    Content type: Reviews Published on:

  22. In recent years, researchers, designers, and project owners have deemed the dry facade system to be a suitable option. Consequently, much research has been conducted on the structural behavior of the dry facad...

    Authors: Mostafa Rezvanifar and Hamidreza Vosoughifar
    Citation: Journal of Engineering and Applied Science 2023 70:31
    Content type: Research Published on:

  24. Lubricating approaches involving nanoparticles have a significant role in reducing friction and wear. Reducing friction is crucial for preserving energy, minimizing emissions, and protecting the environment. T...

    Authors: Trishul Kulkarni, Bhagwan Toksha, Aniruddha Chatterjee, Jitendra Naik and Arun Autee
    Citation: Journal of Engineering and Applied Science 2023 70:29
    Content type: Research Published on:

  25. Assessing available numerical techniques adopted to determine the design time-dependent moment for prestressed concrete segmental bridges constructed by the balanced cantilever method is of utmost importance t...

    Authors: Magdy Rashed and Sameh S. F. Mehanny
    Citation: Journal of Engineering and Applied Science 2023 70:28
    Content type: Research Published on:

  26. In the process of the decarbonization of energy production, the use of photovoltaic systems (PVS) is an increasing trend. In order to optimize the power generation, the fault detection and identification in PV...

    Authors: Stylianos Voutsinas, Dimitrios Karolidis, Ioannis Voyiatzis and Maria Samarakou
    Citation: Journal of Engineering and Applied Science 2023 70:27
    Content type: Research Published on:

  30. Weirs are hydraulic obstructions constructed across an open-channel flow causing a rise in water which is useful to convert water to the channels upstream as well as using these structures as a measuring devic...

    Authors: Arwa A. Mala Obaida, Noor I. Khattab and Ahmed Y. Mohammed
    Citation: Journal of Engineering and Applied Science 2023 70:23
    Content type: Research Published on:

  31. Rapid technological advancement is underway in the sphere of material science research. Several studies have been undertaken around the globe over the last four decades to improve the strength and durability p...

    Authors: M. C. Nataraja, Nahushananda Chakravarthy H. G., R. Shivaprasad and Sujay Raghavendra Naganna
    Citation: Journal of Engineering and Applied Science 2023 70:22
    Content type: Research Published on:

  33. Safety and maintenance of railway tracks has been very crucial, for sustainable economic development of many nations. Almost the entire Indian railway tracks were built over the raised earth embankments. These...

    Authors: Mohammad Aqib, Shadab Usmani, Tanveer Khan, Md Rehan Sadique and Mohd Masroor Alam
    Citation: Journal of Engineering and Applied Science 2023 70:20
    Content type: Research Published on:

  34. Although the wear performance of nylon-6/Boron Nitride (PA6/BN) composites has been studied, their concurrent optimization and prioritization are scarce in the literature. Considering this shortcoming, this pa...

    Authors: Abdulganiyu Adegboyega Adekoya, Wasiu Oyediran Adedeji, Sunday Ayoola Oke and Amaladas John Rajan
    Citation: Journal of Engineering and Applied Science 2023 70:19
    Content type: Research Published on:

  35. Transit-oriented development (TOD) has long been recognized as a significant model for prospering urban vibrancy. However, most studies on TOD and urban vibrancy do not consider temporal differences or the non...

    Authors: Jiandong Peng, Yiwen Hu, Chao Liang, Qiuyu Wan, Qi Dai and Hong Yang
    Citation: Journal of Engineering and Applied Science 2023 70:18
    Content type: Research Published on:

  36. When condition-based maintenance (CBM) is combined with proper decision support systems, it leads to enhanced utilization of resources and increased productivity which tends towards business efficiency. The fo...

    Authors: Henry Ogbemudia Omoregbee, Bright Aghogho Edward and Mabel Usunobun Olanipekun
    Citation: Journal of Engineering and Applied Science 2023 70:17
    Content type: Research Published on:

  40. This paper is aimed at assessing by theory and experiment the current–voltage and power-voltage characteristics of a PV module as influenced by dust accumulation. A method is proposed in a computer code to fol...

    Authors: Reham Kamal, Mazen Abdel-Salam and Mohamed Nayel
    Citation: Journal of Engineering and Applied Science 2023 70:13
    Content type: Research Published on:

  41. The environmental issues related to olive oil by-products and turkey manure are continuously increasing. This ecological hazard could be mitigated by the composting process. This study aimed to investigate the...

    Authors: Rachid Aboutayeb, Soufiane El-Mrini, Abdeljalil Zouhri and Khalid Azim
    Citation: Journal of Engineering and Applied Science 2023 70:12
    Content type: Research Published on:

  42. The proliferation of the SARS-CoV-2 global pandemic has brought to attention the need for epidemiological tools that can detect diseases in specific geographical areas through non-contact means. Such methods m...

    Authors: Max Martin, Paul Goethals, Kathryn Newhart, Emily Rhodes, Jason Vogel and Bradley Stevenson
    Citation: Journal of Engineering and Applied Science 2023 70:11
    Content type: Research Published on:

  44. An afford to enhance TiO2 activity under visible light as well as to utilize the iron rusty waste, has been conducted by doping Fe from the waste into TiO2. The doping was performed by sol-gel method of titania t...

    Authors: Endang Tri Wahyuni, Novianti Dwi Lestari, Ibanez Rosesya Cinjana, Syafriyanti Annur, Taufik Abdillah Natsir and Mudasir Mudasir
    Citation: Journal of Engineering and Applied Science 2023 70:9
    Content type: Research Published on:

  46. This work introduces an approach for optimization machinability measures of power consumption, machining time, and the surface roughness (PMS). This approach is starting with market customer’s demands, passing...

    Authors: Tarek M. El Hossainy, Yasser Zeyada and Abdallah Abdelkawy
    Citation: Journal of Engineering and Applied Science 2023 70:7
    Content type: Reviews Published on:

  47. Experimentally and numerically, the thermal performance enhancement of counterflow twin-pipe heat exchanger with bumpers position variation was explored. A set of semicircular bumpers were positioned at varyin...

    Authors: Sarmad A. Abdul Hussein and Suhaib J. Shbailat
    Citation: Journal of Engineering and Applied Science 2023 70:6
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions