Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 1 of 9

  1. In the forthcoming decades, significant advancements will shape the construction and operations of distribution systems. Particularly, the increasing prominence of photovoltaic (PV) systems in the power indust...

    Authors: Ibrahim Cagri Barutcu, Gulshan Sharma, Ravi V. Gandhi, V. K. Jadoun and Akhil Garg
    Citation: Journal of Engineering and Applied Science 2024 71:118
    Content type: Research Published on:

  2. Nitinol, a biocompatible material, is gradually becoming famous for its superelasticity, shape memory and corrosion resistance behaviours. However, the lower machinability due to the strain-hardening effect an...

    Authors: Amiya Kumar Sahoo and Dhananjay R. Mishra
    Citation: Journal of Engineering and Applied Science 2024 71:117
    Content type: Research Published on:

  3. Titanium matrix composites (TMCs) have high specific strength and stiffness, and high-temperature TMCs can reduce weight by up to 50% when compared with monolithic super alloys while preserving equal stiffness...

    Authors: Birhane Assefa Gemeda, Devendra Kumar Sinha, Getinet Asrat Mengesha and Satyam Shivam Gautam
    Citation: Journal of Engineering and Applied Science 2024 71:116
    Content type: Research Published on:

  4. Near-field (NF) earthquakes have distinct ground motions, forward directivity pulses, and fling-step motions, causing structural responses to differ from far-field (FF) earthquakes. Seismic isolation is regard...

    Authors: Mirza Aamir Baig, Imteyaz Ansari and Nazrul Islam
    Citation: Journal of Engineering and Applied Science 2024 71:115
    Content type: Research Published on:

  5. The performance of a vapor compression refrigeration system (VCRS)-based residential air conditioner operating in a high-ambient temperature (HAT) country was investigated using six zero-ODP (ozone depletion p...

    Authors: Wail Sami Sarsam
    Citation: Journal of Engineering and Applied Science 2024 71:114
    Content type: Research Published on:

  6. The present research is aimed to understand the influence of graphene-reinforced carbon/Kevlar hybrid fabric epoxy composites. Samples HG0, HG2, HG4, and HG6 are fabricated using four layers of fabric mat and ...

    Authors: Venkateswara Babu Peddakondigalla, Vasavi Boggarapu, Rajani Doppalapudi, Phani Pooja N. and Aruna Y.
    Citation: Journal of Engineering and Applied Science 2024 71:113
    Content type: Research Published on:

  9. Concrete is commonly employed in construction for its tremendous compressive strength, despite its low tensile strength. This study aimed at analyzing the strength of concrete when mixed with water of varying ...

    Authors: Kuma Moses Mbuh, Nyuykongi Leonard Nsahlai, Bertrand Jule Penka and Chi Pride Fru
    Citation: Journal of Engineering and Applied Science 2024 71:110
    Content type: Research Published on:

  10. Removing sour gas from any suitable gas sweetening technology in a cost-effective and environmentally responsible manner is a major challenge. This paper discusses how to safely and economically dispose of sma...

    Authors: Ahmed Medhat, Walaa Shehata, Fatma Gad and Ahmed Bhran
    Citation: Journal of Engineering and Applied Science 2024 71:109
    Content type: Research Published on:

  11. Based on the WBS-RBS method, in this study, the risk factors corresponding to the construction risk events of an offshore tunnel foundation pit in Ningbo were identified, and the fuzzy comprehensive evaluation...

    Authors: Ping Wu, Feng Lin, Jiamin Huang and Yidong Xu
    Citation: Journal of Engineering and Applied Science 2024 71:108
    Content type: Research Published on:

  12. Most hot dry rock geothermal wells are small angle directional wells, and rock cuttings easily accumulate at the bottom of the borehole to form a cuttings bed, causing accidents such as drill sticking, reducin...

    Authors: Lei Wang, Jinhui Li, Jianjun Zhao, Shuolong Wang and Zheng Chu
    Citation: Journal of Engineering and Applied Science 2024 71:107
    Content type: Research Published on:

  13. Pipelines subjected to thermal or mechanical loads may fail due to plastic strain accumulation which leads to ratcheting. In this research, cyclic plastic behavior and shakedown limit are investigated experimenta...

    Authors: Mark Nassef Naguib Youssef, Mohammad Mohammad Megahed, Chahinaz Abdel Rahman Saleh and Sahour Nabil Sayed Mohammed
    Citation: Journal of Engineering and Applied Science 2024 71:106
    Content type: Research Published on:

  14. Polymer gears are used in applications requiring small to moderate loads to effectively transmit power and use the limited place available as possible. Various commercial standards have been provided designers...

    Authors: Marah A. Elsiedy, Hesham A. Hegazi, Ahmed M. El-Kassas and Abdelhameed A. Zayed
    Citation: Journal of Engineering and Applied Science 2024 71:105
    Content type: Research Published on:

  15. The paper addresses the emerging notion of “happiness” and “community happiness” as means and an objective in site planning and community design highlighting its complexities and illusive nature in terms of sc...

    Authors: Ramy Kamaleldin Badawy, Sayed M. Ettouney and Nasamat M. A. Abdel Kader
    Citation: Journal of Engineering and Applied Science 2024 71:104
    Content type: Research Published on:

  18. The unconfined compressive strength (UCS) of rocks is a crucial factor in geotechnical engineering, assuming a central role in various civil engineering undertakings, including tunnel construction, mining oper...

    Authors: Linhua Huang, Song Li and Enping Guo
    Citation: Journal of Engineering and Applied Science 2024 71:101
    Content type: Research Published on:

  19. The maximum amount of sensor energy is consumed during broadcasting. Hence in order to make delay with the network lifetime of a wireless sensor network (WSN), there is a need of optimum utilization of sensor ...

    Authors: Anushri Narendra Pathak and Arvind R. Yadav
    Citation: Journal of Engineering and Applied Science 2024 71:100
    Content type: Research Published on:

  20. The study aims to analyze the effectiveness of wastewater treatment by using Carica papaya seeds as bio coagulants to diminish total suspended solids (TSS) and excess phosphate. This method has some advantages be...

    Authors: Siti Alfinna Naulita Vezar, Zeriyatina Tri Belinda, Muhammad Rendana, Tuty Emilia Agustina, Subriyer Nasir, Laila Hanum and Desheila Andarini
    Citation: Journal of Engineering and Applied Science 2024 71:99
    Content type: Research Published on:

  21. The study presents the economic feasibility assessment of converting the produced biogas from water hyacinth biomass into electricity. Approximately, 0.3793 m3CH4/kgVS was generated from the water hyacinth biomas...

    Authors: Enoch Asante, Nana Yaw Asiedu, Samuel Sarpong, Emmanuel Okoh Agyemang, Ibrahim Ajani, Augustine Ntiamoah, Albert Amatey Adjaottor and Ahmad Addo
    Citation: Journal of Engineering and Applied Science 2024 71:98
    Content type: Research Published on:

  23. Wind power prediction holds significant value for the stability of the electrical grid when wind power is connected to the grid. Using neural networks for wind power prediction may have some limitations, such ...

    Authors: Xin Xie, Feng Huang, Chengjin He, Huaan Zhou, Feiyu Hu, Bin Zeng and Lingxiang Huang
    Citation: Journal of Engineering and Applied Science 2024 71:96
    Content type: Research Published on:

  24. This research aimed to determine compressive stress and response time of using refractory brick waste as alternative natural coarse aggregates combined with blended cement in manufacturing sustainable concrete...

    Authors: Deti Deti, Muhammad Wihardi Tjaronge and Muhammad Akbar Caronge
    Citation: Journal of Engineering and Applied Science 2024 71:95
    Content type: Research Published on:

  25. Integrating energy systems with information systems in smart grids offers a promising avenue for combating electricity theft by leveraging real-time data insights. Suspicious activity indicative of theft can b...

    Authors: Manoj Kumawat, Adeniyi Onaolapo, Gulshan Sharma, Ibrahim Cagri Barutcu, Temitope Adefarati and Ramesh Bansal
    Citation: Journal of Engineering and Applied Science 2024 71:94
    Content type: Research Published on:

  26. Image denoising technology removes noise from the corrupted image by utilizing different features between image and noise. Convolutional neural network (CNN)-based algorithms have been the concern of the recen...

    Authors: Qian Xiang, Yong Tang and Xiangyang Zhou
    Citation: Journal of Engineering and Applied Science 2024 71:93
    Content type: Research Published on:

  27. System design is a challenging and time-consuming task which often requires close collaboration between several multidisciplinary design teams to account for complex interactions between components and sub-sys...

    Authors: Christopher Douglas, Jae Sung Huh, Sang Ook Jun and Il Yong Kim
    Citation: Journal of Engineering and Applied Science 2024 71:92
    Content type: Research Published on:

  28. The traditional electrical grid has to be digitally improved as digitalization and effective integration of renewable energy bring better efficiency, intelligence, and safety into the grid; hence, the transiti...

    Authors: Priscilla Oyeladun Ajiboye, Kwame Opuni-Boachie Obour Agyekum and Emmanuel Asuming Frimpong
    Citation: Journal of Engineering and Applied Science 2024 71:91
    Content type: Reviews Published on:

  29. Superalloy Inconel718 is an important material for aircraft preparation because of its excellent performance at high temperatures. However, when cutting Inconel718, a large amount of cutting heat will be gener...

    Authors: Xin Liu, Xiaoliang Lin, Xiaowei Jia, Yueyang Li and Changfeng Shao
    Citation: Journal of Engineering and Applied Science 2024 71:90
    Content type: Research Published on:

  30. Recent sustainable building strategies make the right decisions to be environmentally friendly and reduce carbon emissions. In some reinforced concrete (RC) elements, fiber-reinforced polymer (FRP) bars have b...

    Authors: Marwan Abdo, Basem Abdelwahed and Salah El-Metwally
    Citation: Journal of Engineering and Applied Science 2024 71:89
    Content type: Research Published on:

  31. Many irrigation schemes are performing poorly for a number of reasons, and this should be improved to increase the efficiency and productivity of the schemes. This study attempted to determine the performance ...

    Authors: Mulugeta Abebo Abo, Shemelies Assefa and Abraham W/Michael
    Citation: Journal of Engineering and Applied Science 2024 71:88
    Content type: Research Published on:

  32. In the pursuit of cost reduction and enhanced construction efficiency in the mechanical connection of reinforcing bars within precast assembled concrete structures, a novel-reinforcing bar connection joint is ...

    Authors: Dongdong Li, Tongheng Tu, Xiuli Yang, Maolin Cheng and Hao Xiao
    Citation: Journal of Engineering and Applied Science 2024 71:87
    Content type: Reviews Published on:

  33. This study examined the issues of wellbore instability encountered during the drilling of the vertical exploration Al-Rateena-1 well, Block 25D, Al-Rawat Field, Sudan. Measurements of the wellbore diameter rev...

    Authors: Ahmed Abdelaziz Ibrahim Elrayah
    Citation: Journal of Engineering and Applied Science 2024 71:86
    Content type: Research Published on:

  35. The unconfined compressive strength (UCS) of stabilized soil with lime and cement is a crucial mechanical factor in developing accurate geomechanical models. In the past, determining UCS required laborious lab...

    Authors: Weiqing Wan
    Citation: Journal of Engineering and Applied Science 2024 71:84
    Content type: Research Published on:

  37. Egypt’s urban communities face many threats, including, pluvial floods, heat waves, and lack of publicly accessible urban green spaces. Nature-based solutions such as constructed wetlands (CWs) present a promi...

    Authors: Nouran Moustafa Mohamed, Abdullah Farouk Al-Attar, Yomna Amr Lotfi and Hesham Mohamed El-Barmelgy
    Citation: Journal of Engineering and Applied Science 2024 71:82
    Content type: Research Published on:

  39. Vegetable oils are a highly promising alternative to produce various lubricants, owing to their biodegradability and eco-friendliness. In comparison to mineral oil, these oils possess a higher flash point and ...

    Authors: M. A. Prasanth, S. Rani, S Prathap Singh, D. Elil Raja and Praveen Barmavatu
    Citation: Journal of Engineering and Applied Science 2024 71:80
    Content type: Research Published on:

  40. Deep shale gas development has great potential, but the frequent occurrence of shale gas well casing change problems triggered by geological factors seriously restricts deep shale gas development. In order to ...

    Authors: Youzhi Zheng, Jun Zhao, Xihui Hu, Zhilin Li, Zhanwu Zhang, Ziming Guo, Yu He, Lang He, Yong Chen and Yi Xie
    Citation: Journal of Engineering and Applied Science 2024 71:79
    Content type: Research Published on:

  41. Magnesium fuel cells deliver higher electrical power output than lithium-ion batteries and have the potential to become an economically attractive alternative power source for domestic purposes. In place of no...

    Authors: R. Jayakrishnan, Aruna Raj, Akhil M. Anand, P C Harikrishnan and Athira Ayyappan
    Citation: Journal of Engineering and Applied Science 2024 71:78
    Content type: Research Published on:

  42. This study proposes a modification for the current design approach for square and rectangular silos that accounts for silos’ wall flexibility. First, the authors investigated the effect of wall stiffness symbo...

    Authors: Mohamed H. Abdelbarr, Osman M. O. Ramadan, AlHussein Hilal, A. M. Sanad and Hany A. Abdalla
    Citation: Journal of Engineering and Applied Science 2024 71:77
    Content type: Research Published on:

  43. This paper thoroughly explores the role of object detection in smart cities, specifically focusing on advancements in deep learning-based methods. Deep learning models gain popularity for their autonomous feat...

    Authors: Jiya Tian, Qiangshan Jin, Yizong Wang, Jie Yang, Shuping Zhang and Dengxun Sun
    Citation: Journal of Engineering and Applied Science 2024 71:76
    Content type: Research Published on:

  45. Rapid-hardening concrete (RHC) is becoming more popular as a cast-in-place jointing material in precast concrete bridges and buildings due to its high tensile strength and crack resistance. RHC’s technical pro...

    Authors: Mohamed Hussein Elfakhrany, Amal Zamrawi, Wael Ibrahim and Alaa Sherif
    Citation: Journal of Engineering and Applied Science 2024 71:74
    Content type: Research Published on:

  47. The disposal of magnesite mine tailings (MMT), a by-product of magnesite mining, raises significant environmental concerns due to its adverse effects on soil, water and air quality. Likewise, the improper disp...

    Authors: Vinodhkumar Shanmugasundaram, Aravind Eswaran, Arulraj Pandiyan and Shreeramsundhar Ramakrishnan
    Citation: Journal of Engineering and Applied Science 2024 71:72
    Content type: Research Published on:

  48. Early location of melanoma, a dangerous shape of skin cancer, is basic for patients. Indeed, for master dermatologists, separating between threatening and generous melanoma could be a troublesome errand. Surgi...

    Authors: Manikandan Rajagopal, Shubhangi N. Ghate, Rajeswari P and E. N. Ganesh
    Citation: Journal of Engineering and Applied Science 2024 71:71
    Content type: Research Published on:

  49. The challenge of urban growth and land use land cover (LULC) change is particularly critical in developing countries. The use of remote sensing and GIS has helped to generate LULC thematic maps, which have pro...

    Authors: Nishant Mehra and Janaki Ballav Swain
    Citation: Journal of Engineering and Applied Science 2024 71:70
    Content type: Research Published on:

  50. In this work, epoxy nanocomposite was prepared with the inclusion of unfunctionalized as-received GNPs (ARGNPs) and functionalized GNPs using surfactant Tween 80 (T80GNPs) in the epoxy resin using a mechanical...

    Authors: Wan Zateel Aqmaer Wan Ab Halim, Ramli Junid, Norazliane Sazali, Januar Parlaungan Siregar, Jeefferie Abd Razak, Deni Fajar Fitriyana, Tezara Cionita and Jamiluddin Jaafar
    Citation: Journal of Engineering and Applied Science 2024 71:69
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions