Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 6 of 9

  4. Weirs are hydraulic obstructions constructed across an open-channel flow causing a rise in water which is useful to convert water to the channels upstream as well as using these structures as a measuring devic...

    Authors: Arwa A. Mala Obaida, Noor I. Khattab and Ahmed Y. Mohammed
    Citation: Journal of Engineering and Applied Science 2023 70:23
    Content type: Research Published on:

  5. Rapid technological advancement is underway in the sphere of material science research. Several studies have been undertaken around the globe over the last four decades to improve the strength and durability p...

    Authors: M. C. Nataraja, Nahushananda Chakravarthy H. G., R. Shivaprasad and Sujay Raghavendra Naganna
    Citation: Journal of Engineering and Applied Science 2023 70:22
    Content type: Research Published on:

  7. Safety and maintenance of railway tracks has been very crucial, for sustainable economic development of many nations. Almost the entire Indian railway tracks were built over the raised earth embankments. These...

    Authors: Mohammad Aqib, Shadab Usmani, Tanveer Khan, Md Rehan Sadique and Mohd Masroor Alam
    Citation: Journal of Engineering and Applied Science 2023 70:20
    Content type: Research Published on:

  8. Although the wear performance of nylon-6/Boron Nitride (PA6/BN) composites has been studied, their concurrent optimization and prioritization are scarce in the literature. Considering this shortcoming, this pa...

    Authors: Abdulganiyu Adegboyega Adekoya, Wasiu Oyediran Adedeji, Sunday Ayoola Oke and Amaladas John Rajan
    Citation: Journal of Engineering and Applied Science 2023 70:19
    Content type: Research Published on:

  9. Transit-oriented development (TOD) has long been recognized as a significant model for prospering urban vibrancy. However, most studies on TOD and urban vibrancy do not consider temporal differences or the non...

    Authors: Jiandong Peng, Yiwen Hu, Chao Liang, Qiuyu Wan, Qi Dai and Hong Yang
    Citation: Journal of Engineering and Applied Science 2023 70:18
    Content type: Research Published on:

  10. When condition-based maintenance (CBM) is combined with proper decision support systems, it leads to enhanced utilization of resources and increased productivity which tends towards business efficiency. The fo...

    Authors: Henry Ogbemudia Omoregbee, Bright Aghogho Edward and Mabel Usunobun Olanipekun
    Citation: Journal of Engineering and Applied Science 2023 70:17
    Content type: Research Published on:

  14. This paper is aimed at assessing by theory and experiment the current–voltage and power-voltage characteristics of a PV module as influenced by dust accumulation. A method is proposed in a computer code to fol...

    Authors: Reham Kamal, Mazen Abdel-Salam and Mohamed Nayel
    Citation: Journal of Engineering and Applied Science 2023 70:13
    Content type: Research Published on:

  15. The environmental issues related to olive oil by-products and turkey manure are continuously increasing. This ecological hazard could be mitigated by the composting process. This study aimed to investigate the...

    Authors: Rachid Aboutayeb, Soufiane El-Mrini, Abdeljalil Zouhri and Khalid Azim
    Citation: Journal of Engineering and Applied Science 2023 70:12
    Content type: Research Published on:

  16. The proliferation of the SARS-CoV-2 global pandemic has brought to attention the need for epidemiological tools that can detect diseases in specific geographical areas through non-contact means. Such methods m...

    Authors: Max Martin, Paul Goethals, Kathryn Newhart, Emily Rhodes, Jason Vogel and Bradley Stevenson
    Citation: Journal of Engineering and Applied Science 2023 70:11
    Content type: Research Published on:

  18. An afford to enhance TiO2 activity under visible light as well as to utilize the iron rusty waste, has been conducted by doping Fe from the waste into TiO2. The doping was performed by sol-gel method of titania t...

    Authors: Endang Tri Wahyuni, Novianti Dwi Lestari, Ibanez Rosesya Cinjana, Syafriyanti Annur, Taufik Abdillah Natsir and Mudasir Mudasir
    Citation: Journal of Engineering and Applied Science 2023 70:9
    Content type: Research Published on:

  20. This work introduces an approach for optimization machinability measures of power consumption, machining time, and the surface roughness (PMS). This approach is starting with market customer’s demands, passing...

    Authors: Tarek M. El Hossainy, Yasser Zeyada and Abdallah Abdelkawy
    Citation: Journal of Engineering and Applied Science 2023 70:7
    Content type: Reviews Published on:

  21. Experimentally and numerically, the thermal performance enhancement of counterflow twin-pipe heat exchanger with bumpers position variation was explored. A set of semicircular bumpers were positioned at varyin...

    Authors: Sarmad A. Abdul Hussein and Suhaib J. Shbailat
    Citation: Journal of Engineering and Applied Science 2023 70:6
    Content type: Research Published on:

  24. In order to explore an accurate method to evaluate the corrosion of reinforced concrete structures, the spontaneous magnetic flux leakage (SMFL) signal distribution on the surface of reinforced concrete specim...

    Authors: Beian Li, Shidong Li, Guangzhao Zhang, Huajian Ying, Qianwen Xia and Shangkai Liu
    Citation: Journal of Engineering and Applied Science 2023 70:3
    Content type: Research Published on:

  26. It is well known that a wireless body area network (WBAN) is a special proposed wireless sensor network (WSN) that can assist in monitoring physiological signals for the evaluation and planning of patient trea...

    Authors: Pitchakron Thippun, Yoschanin Sasiwat, Dujdow Buranapanichkit, Apidet Booranawong, Nattha Jindapetch and Hiroshi Saito
    Citation: Journal of Engineering and Applied Science 2023 70:1
    Content type: Research Published on:

  27. A parametric study was conducted to investigate the influence of geometric factors on the fully encased composite column under eccentric loading about both axes of the steel section by using ABAQUS software. T...

    Authors: Badrinarayan Rath, Feven Kiflu, Bewiket Dereje, Shiferaw Garoma, Kassahun Kebede and Endalkachew Mosisa Gutema
    Citation: Journal of Engineering and Applied Science 2022 69:117
    Content type: Research Published on:

  29. Distance and similarity measures are very important in clustering, pattern recognition, decision-making and other scientific fields. For the existing hesitant fuzzy distance, most of them do not consider the h...

    Authors: Fuping Liao, Wu Li, Xiaoqiang Zhou and Gang Liu
    Citation: Journal of Engineering and Applied Science 2022 69:115
    Content type: Research Published on:

  30. Bio-based oilfield chemicals are gaining attention due to their availability, cost-effectiveness, and non-toxic nature. Surfactants facilitate recovery of residual oil by reducing the interfacial tension betwe...

    Authors: Amalate Ann Obuebite, William Iheanyi Eke and Tinuola Udoh
    Citation: Journal of Engineering and Applied Science 2022 69:114
    Content type: Research Published on:

  31. DNA microarray data sets have been widely explored and used to analyze data without any previous biological background. However, analyzing them becomes challenging if data are missing. Thus, machine learning t...

    Authors: Nourhan Yehia, Manal Abdel Wahed and Mai Said Mabrouk
    Citation: Journal of Engineering and Applied Science 2022 69:113
    Content type: Research Published on:

  32. A correlation effect between particle size of kaolin clay and injection moulding process parameters on impact strength, shrinkage and warpage of high-density polyethylene/kaolin clay (HDPE/KC) composites was c...

    Authors: Abdulrouf Trish, Wael Elhrari, Hussein Etmimi and Abdalah Klash
    Citation: Journal of Engineering and Applied Science 2022 69:112
    Content type: Research Published on:

  33. The progressive collapse of the structure caused by the partial failure of the structure will cause severe consequences and massive losses, and structural progressive collapse resistance has always been a hot ...

    Authors: Chao Bao, Yuhang Zhang, Dahai Lv, Huxiang Wang, Xiaotong Ma, Jixing Cao and Kar Sing Lim
    Citation: Journal of Engineering and Applied Science 2022 69:111
    Content type: Research Published on:

  35. Lateritic soil is a kind of residual soil widespread in tropical countries. This soil usually possesses acceptable engineering properties to be laid under the construction projects. However, it needs treatment...

    Authors: Mohammad Jawed Roshan, Ahmad Safuan Bin A. Rashid, Muhammad Azril Bin Hezmi, Mohammad Nazir Nejabi, Siti Norafida Bt.Jusoh, Sakina Tamassoki and Roslizayati Razali
    Citation: Journal of Engineering and Applied Science 2022 69:109
    Content type: Research Published on:

  36. Small-scale preliminary studies are necessary to determine the feasibility of the machine learning (ML) algorithm and time-evolution kinetics to meet the design specification of the treatment unit. The train a...

    Authors: Victor Ifeanyi Ugonabo, Prosper Eguono Ovuoraye, Ahmad Chowdhury and Endrit Fetahi
    Citation: Journal of Engineering and Applied Science 2022 69:108
    Content type: Research Published on:

  38. Steel plates are used as the main components of steel elements in many structures. Openings in steel elements may exist for maintenance or inspection purposes in addition to creating paths for different fixtur...

    Authors: Maha M. Hassan, Sara I. Mahmoud, Mohammed H. Serror and Ahmed F. Hassan
    Citation: Journal of Engineering and Applied Science 2022 69:106
    Content type: Research Published on:

  39. Local scour is the major cause of bridge water damage. The sediment in the riverbed around the pier is eroded and transported by water flow, leading to a loss of bridge foundation stability. In this study, a h...

    Authors: Kedian Luo, Yuhang Si, Shaohua Lu, Boyang Liang and Hongliang Qi
    Citation: Journal of Engineering and Applied Science 2022 69:105
    Content type: Research Published on:

  40. The idea that computers can build their own programs is extremely significant, and many researchers are working on this challenge. Code generation is described as the process of generating executable code that...

    Authors: Ahmed S. Soliman, Mayada M. Hadhoud and Samir I. Shaheen
    Citation: Journal of Engineering and Applied Science 2022 69:104
    Content type: Research Published on:

  41. This study aims to investigate the effects of piston bowl shape and biodiesel fuel on combustion and emissions of a direct injection (DI) diesel engine. Three configurations of piston bowl geometry are modeled...

    Authors: Mohamed Khaled Abdelrazek, Mohsen Mohamed Abdelaal and Ahmed Mustafa El-Nahas
    Citation: Journal of Engineering and Applied Science 2022 69:103
    Content type: Research Published on:

  42. In programming learning environments, the pressure of delivering many programming assignments makes plagiarism the easiest solution. This highly threatens the learning process; therefore, the need of an automa...

    Authors: Eman Hosam, Mayada Hadhoud, Amir Atiya and Magda Fayek
    Citation: Journal of Engineering and Applied Science 2022 69:102
    Content type: Research Published on:

  44. The looper control of hot strip finishing mill is one of the most critical control items in hot strip rolling mill process. It is a highly complex nonlinear system, with strong states coupling and uncertainty ...

    Authors: Ahmed Gaber, Mahmoud Elnaggar and Hossam Abdel Fattah
    Citation: Journal of Engineering and Applied Science 2022 69:100
    Content type: Reviews Published on:

  46. Laser drilling on polymers has many applications in various industries, such as sensors, aerospace, medical devices, and microelectronics. In this research, a CO2 laser machine was employed for micro-drilling PC ...

    Authors: Ansam E. Abdulwahab, Kadhim A. Hubeatir and Khalil I. Imhan
    Citation: Journal of Engineering and Applied Science 2022 69:98
    Content type: Research Published on:

  47. Expropriation of land is considered a crucial instrument of any development practice. The legitimacy of expropriation is essentially reinforced as it is employed for the public interest, often implied as infra...

    Authors: Amira Abdelrazik Elbortokaly, Ahmed Mohamed Shalaby and Sherin Ali Gammaz
    Citation: Journal of Engineering and Applied Science 2022 69:97
    Content type: Research Published on:

  48. Efficiency in the industrial sector is a priority when seeking to minimize production costs and reduction in losses. Harmonic generation and associated losses need to be treated carefully with broad implementa...

    Authors: Daniel Esene Okojie, Henry Ogbemudia Omoregbee, Coneth Graham Richards, Agha Francis Nnachi and Bertus Wilhelm Bornebroek
    Citation: Journal of Engineering and Applied Science 2022 69:96
    Content type: Research Published on:

  49. To optimize the optimal nozzle structure and multiple nozzle arrangement for hydrate jet crushing and to promote the development of solid fluidization extraction technology for shallow unconformity hydrate in ...

    Authors: Xiaoyu Fang, Xushen Li, Lin Zhong, Xing Fang and Jiang Lu
    Citation: Journal of Engineering and Applied Science 2022 69:95
    Content type: Research Published on:

  50. Physical activity has a great impact on the development and overall health of children. Urban parks, which generally feature both green areas and playgrounds, offer children a wide range of opportunities to be...

    Authors: Shereen A. El-Kholy, Yasser M. Moustafa and Manal A. S. Abou El-Ela
    Citation: Journal of Engineering and Applied Science 2022 69:93
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions