Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 7 of 9

  3. In the Niger Delta, the Jay Field offshore structural model and seismic attribute analysis were carried out to enhance prospect evaluation and mitigate risk in field development operations, especially in regio...

    Authors: Rotimi P. Akinwale, Elijah Ayolabi and Solomon A. Akinwale
    Citation: Journal of Engineering and Applied Science 2022 69:91
    Content type: Reviews Published on:

  4. Through the field of renewable energy, the vertical-axis wind turbine is preferable, especially when the wind speed is low to medium. The optimization of blade structure design is essential to enhance the usab...

    Authors: Ahmed Ali Geneid, Mostafa R. A. Atia and Ahmed Badawy
    Citation: Journal of Engineering and Applied Science 2022 69:90
    Content type: Research Published on:

  5. Bench test has been proved to be an effective method in the field of fatigue life prediction and reliability design for construction machinery internal combustion engine (CMICE), and the reasonable load reprod...

    Authors: Zhijie Li, Yonglai Wang, Chaoqin Liu, Weicheng Kong and Cuicui Chen
    Citation: Journal of Engineering and Applied Science 2022 69:89
    Content type: Research Published on:

  6. Impingement jet heat transfer was studied using liquid and gas fluids to determine better cooling fluid. The materials used were rectangular steel plates of 230 mm by 120 mm by 12 mm, single jet diameters of 1...

    Authors: Azubuike Michael Nwankwo, Thomas Okechukwu Onah and Bertrand Nduka Nwankwojike
    Citation: Journal of Engineering and Applied Science 2022 69:88
    Content type: Research Published on:

  7. The long stay at home during the COVID-19 pandemic implied that most people had to perform all their daily activities at home. That raised the need for special home features related to the health, safety, and ...

    Authors: Nancy H. Alhadedy and Hisham S. Gabr
    Citation: Journal of Engineering and Applied Science 2022 69:87
    Content type: Research Published on:

  8. Experimental and numerical studies are carried out to investigate the flexural behavior of precast lightweight composite beams composed of a hollow steel beam strengthened with a ferrocement layer. This compos...

    Authors: Ehab Elkassas, Alaa M. Morsy and Mohamed Marzouck
    Citation: Journal of Engineering and Applied Science 2022 69:86
    Content type: Research Published on:

  9. Shear walls are critical in designing of reinforced concrete structures against lateral loads. Although various research studies have been conducted on the design of reinforced concrete shear walls, these stud...

    Authors: Reda Fadallah, Mohamed Elbayomy, Hatem Ghith and Hamed Salem
    Citation: Journal of Engineering and Applied Science 2022 69:85
    Content type: Research Published on:

  10. According to the seafloor drill working conditions and the complex formation characteristics of the seafloor, this paper aims to improve the adaptability of the diamond bit to the formation and the coring qual...

    Authors: Jialiang Wang, Chen Chen, Dilei Qian, Fenfei Peng, Mengfei Yu, Yang Sun and Deping Peng
    Citation: Journal of Engineering and Applied Science 2022 69:84
    Content type: Research Published on:

  11. The dramatic increase of different human activities around and along Ismailia Canal threats the groundwater system. The assessment of groundwater suitability for drinking purpose is needed for groundwater sust...

    Authors: Hend Samir Atta, Maha Abdel-Salam Omar and Ahmed Mohamed Tawfik
    Citation: Journal of Engineering and Applied Science 2022 69:83
    Content type: Research Published on:

  12. Cable-stayed bridges have gained greater coverage in the last few decades. This study focuses mainly on two parameters. Firstly, the shape of pylons; the performance of many shapes is investigated after being ...

    Authors: Ahmed M. Fawzy, Khaled F. El-Kashif and Hany A. Abdalla
    Citation: Journal of Engineering and Applied Science 2022 69:82
    Content type: Research Published on:

  13. In the present investigation, the direct reduction of magnetite and hematite powder with and without 5% bitumen at various temperatures has been studied in a hydrogen atmosphere. The prepared samples were fire...

    Authors: Qazi Abdul Khalique Ansari, Hira Lal Soni, Abdul Sami Channa, Kashif Hussain Mangi and Suhaib Ansari
    Citation: Journal of Engineering and Applied Science 2022 69:81
    Content type: Research Published on:

  14. After the increasing climate change and fast urbanization adverse effects on pluvial floods, in addition to the freshwater resources’ shortage risk, transversal urban solutions need to be tackled. This paper f...

    Authors: Hafsa Refaey Elsharqawy, Mohamed Mohamed Elbarmelgy and Ahmed Esam Elmalt
    Citation: Journal of Engineering and Applied Science 2022 69:80
    Content type: Research Published on:

  15. In recent years, the application of nanoadditives in biofuels is gaining much attention due to their increase in thermophysical properties such as high surface area, thermal conductivity, and mass diffusivity....

    Authors: M. Srinivasa Rao, Ch. Srinivasa Rao and A. Swarna Kumari
    Citation: Journal of Engineering and Applied Science 2022 69:79
    Content type: Reviews Published on:

  20. This research aims at producing and characterizing a low-wear friction lining material using a hybrid mixture of burnt vehicle tyres, pulverized palm kernel shell (PKS), pulverized coconut shell (CS), iron and...

    Authors: Chinedum Ogonna Mgbemena, Richard U. Esigie, Chika Edith Mgbemena and Chike M. Ata
    Citation: Journal of Engineering and Applied Science 2022 69:74
    Content type: Research Published on:

  21. This study is a numerical modeling of transport phenomena occurring in the reaction chamber during diamond or amorphous hydrogenated carbon films growth by a hot filament chemical vapor deposition (HFCVD) tech...

    Authors: Nour Khelef, Fethi Khelfaoui and Oumelkheir Babahani
    Citation: Journal of Engineering and Applied Science 2022 69:73
    Content type: Research Published on:

  23. In a world where communication requires ever faster data transmission capable of transmitting high speeds. In order to reach and transmit this high speed, it is necessary to increase the frequency that carries...

    Authors: Kaddour Benkhallouk, Amina Bendaoudi, Mohammed Berka and Zoubir Mahdjoub
    Citation: Journal of Engineering and Applied Science 2022 69:71
    Content type: Research Published on:

  24. Cable-stayed bridges are important infrastructure facilities serving the world today. Therefore, their safety against earthquake ground motions is crucial. However, due to their long spans, the affecting seism...

    Authors: Maryam A. Seleemah, Mohamed S. Helam, Mohamed A. Abu-alenein, Eslam B. Hammad, Mohamed S. Goda, Ayman A. Seleemah and Amr Z. Elkady
    Citation: Journal of Engineering and Applied Science 2022 69:70
    Content type: Research Published on:

  25. Train rolling stock examination (TRSE) is a physical procedure for inspecting the bogie parts during transit at a little over 30 kmph. Currently, this process is manually performed across many railway networks...

    Authors: Kaja Krishnamohan, Ch. Raghava Prasad and P. V. V. Kishore
    Citation: Journal of Engineering and Applied Science 2022 69:69
    Content type: Research Published on:

  26. Because the clear height of a building involves many particularities of buildings, structures and equipment, the traditional design mode can only roughly estimate the clear height of a building and cannot full...

    Authors: Dejiang Wang, Fan Li, Chang Liu, Youyang Hu, Jianji Cheng and Yu Zhan
    Citation: Journal of Engineering and Applied Science 2022 69:68
    Content type: Research Published on:

  27. Public-private partnerships (PPP) have many critical socio-economic concession variables that need to be determined during the negotiation of the PPP contracts. However, their determination presents complexiti...

    Authors: Faisal Alghamdi, Omer Tatari and Leena Alghamdi
    Citation: Journal of Engineering and Applied Science 2022 69:67
    Content type: Research Published on:

  28. A great attention is subjected to the environmentally friendly natural gas. Compared to other fossil fuels, natural gas is a cleaner burning due to the lower emission of carbon dioxides into the air. Removal o...

    Authors: M. A. El Maghraby, N. A. El Moniem and Amr Abdelghany
    Citation: Journal of Engineering and Applied Science 2022 69:66
    Content type: Research Published on:

  29. The winter closure is an annual action taken every year by the Egyptian authorities by closing water flows in series of channels for maintenance of water channels where levels in water channels are forced to r...

    Authors: Reham Samy, Nabil Abdelmonem, Ibrahim Ismail and Amr Abdelghany
    Citation: Journal of Engineering and Applied Science 2022 69:65
    Content type: Research Published on:

  31. Evaporative cooling technology has a potential to serve as a substitute to conventional vapor compression cooling. Direct evaporative cooling however usually introduces more moisture to the cooling space. In t...

    Authors: T. O. Ahmadu, Y. S. Sanusi and F. Usman
    Citation: Journal of Engineering and Applied Science 2022 69:63
    Content type: Research Published on:

  32. The effect of welding parameters on the mechanical and metallurgical properties of armor steel weldment was studied using gas tungsten arc welding process with two filler wires: carbon steel and austenitic sta...

    Authors: M. A. Morsy, Sabry M. Abdel Aziz, Khaled Abdelwahed and Sabreen A. Abdelwahab
    Citation: Journal of Engineering and Applied Science 2022 69:62
    Content type: Research Published on:

  33. Sustainability and project management are two trends that have taken global interest in the last decades due to their significant role in various fields of life. However, these two topics have rarely been addr...

    Authors: Heba Farouk Abdelkhalik and Hisham Hussein Azmy
    Citation: Journal of Engineering and Applied Science 2022 69:61
    Content type: Research Published on:

  34. Hydrocarbons continue to play an important role in providing affordable energy to meet rising energy demand. Amidst growing concerns on the environmental impact of oil and gas production processes, many resear...

    Authors: Princewill M. Ikpeka, Johnson O. Ugwu, Gobind G. Pillai and Paul Russell
    Citation: Journal of Engineering and Applied Science 2022 69:60
    Content type: Reviews Published on:

  36. The generation of vortices in sharp bends of rivers is a well-known phenomenon. However, their influence on the bridge pier has not been investigated deeply. This study studies the flow pattern around the twin...

    Authors: Farid Sedighi, Mohammad Vaghefi and Elham Zarei
    Citation: Journal of Engineering and Applied Science 2022 69:58
    Content type: Research Published on:

  37. Plant turnarounds are one of the most critical events in the Saudi Arabian oil and gas industries. Shutdowns have the potential to affect the plant’s cash flow and objectives either in a constructive nor a bad...

    Authors: Mohamed Fayas Saffiudeen, Fasil T. Mohammed and Abdullah Syed
    Citation: Journal of Engineering and Applied Science 2022 69:57
    Content type: Research Published on:

  38. Engagement is integral to design education; thus, the purpose of this work is to examine how engagement can be maintained digitally, using prevalent social networking tools, to support architectural education ...

    Authors: Ramy Bakir and Sara Alsaadani
    Citation: Journal of Engineering and Applied Science 2022 69:56
    Content type: Research Published on:

  39. Calcite is one of the commonest bond elements in natural collapsible soils. Where calcite occurs in significant amounts, the soils are considered calcareous. Collapsible soils are characterised by high porosit...

    Authors: Alfred Wilson Opukumo, Colin T. Davie and Stephanie Glendinning
    Citation: Journal of Engineering and Applied Science 2022 69:55
    Content type: Research Published on:

  42. Employment of natural fiber for the filament of fused deposition modeling (FDM) can be found in numerous studies from different areas. However, the presence of fiber such as kenaf in polymer filament could cau...

    Authors: Syaza Najwa Mohd Farhan Han, Mastura Mohammad Taha, Muhd Ridzuan Mansor and Muhamad Arfauz A. Rahman
    Citation: Journal of Engineering and Applied Science 2022 69:52
    Content type: Research Published on:

  43. In recent years, non-wovens have become the main segment of textile production because they can find applications in different areas. Thermal insulation properties, fire resistance, and flexibility make them c...

    Authors: Rositsa Petkova-Slipets, Penka Zlateva and Desislava Staneva
    Citation: Journal of Engineering and Applied Science 2022 69:51
    Content type: Research Published on:

  45. The use of cold-formed sections (CFS) in construction is growing quickly in spite of the difficulty facing the designer in choosing the optimum sections’ proportions of any CFS in order to acquire the most eco...

    Authors: Sherine Swelem, Ahmed Fahmy and Heba Ellafy
    Citation: Journal of Engineering and Applied Science 2022 69:49
    Content type: Research Published on:

  46. In Iran, recently in large-scale projects, the science of value engineering has become very important and in order to show the significant impact of value engineering results in increasing efficiency and reduc...

    Authors: Mohsen Jafari Nigjeh and Nima Amani
    Citation: Journal of Engineering and Applied Science 2022 69:48
    Content type: Research Published on:

  48. Net zero carbon building (NZCB) is considered an important approach for reducing carbon emissions (CE), which may be due to the exponential rise of energy use and greenhouse gas emissions in buildings industry...

    Authors: Safie El-din Ahmed Fouly and Ahmed Reda Abdin
    Citation: Journal of Engineering and Applied Science 2022 69:46
    Content type: Research Published on:

  50. The Murredu watershed in Telangana State was chosen for the morphometric and land use/land cover (LULC) analysis in this current study. Geographical information system (GIS) and remote sensing (RS) techniques ...

    Authors: Padala Raja Shekar and Aneesh Mathew
    Citation: Journal of Engineering and Applied Science 2022 69:44
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions