Skip to main content

Articles

Page 8 of 9

  1. Bio-CaCO3 nanoparticles have several applications and have attracted significant attention in current research. N,N-dimethylformamide (DMF) has been proven to be an effective non-volatile solvent for synthesizing...

    Authors: Kenneth Mensah, Ayda Mostafa Abdelmageed and Hassan Shokry
    Citation: Journal of Engineering and Applied Science 2022 69:16
  2. Green spaces are recognised as an important contributor in enhancing the quality of urban life. Many cities are now working on preserving and increasing their green spaces as a part of their sustainable develo...

    Authors: Dalia Aly and Branka Dimitrijevic
    Citation: Journal of Engineering and Applied Science 2022 69:15
  3. Design of new unmanned underwater vehicles (UUVs) is a continuous process since decades, where finding an optimal design for a specific application is still a challenging subject. New inspection class category...

    Authors: Ihab ELAFF
    Citation: Journal of Engineering and Applied Science 2022 69:14
  4. This paper discusses a passive vibration control method to improve the shock tolerance of hard disk drives (HDDs) in operating condition (op-shock tolerance). Past works in improving the HDDs’ op-shock toleran...

    Authors: Djati Wibowo Djamari, Fook Fah Yap, Bentang Arief Budiman and Farid Triawan
    Citation: Journal of Engineering and Applied Science 2022 69:13
  5. Earthquake investigations confirm that un-symmetric buildings suffer more damage than their symmetric counterparts. Torsional vibrations due to irregularity are one of the main factors which cause damage to bu...

    Authors: Khaled M. Alaa, Khaled F. El-Kashif and Hamed M. Salem
    Citation: Journal of Engineering and Applied Science 2022 69:12
  6. This paper deals with a systematic study on the co-doping N,S on TiO2 photocatalyst to improve its activity under visible light on the removal of Pb(II) from the aqueous media. The co-doping TiO2 by N,S atoms was...

    Authors: Endang Tri Wahyuni, Nanda Alzeta Pratama, Novianti Dwi Lestari and Suherman Suherman
    Citation: Journal of Engineering and Applied Science 2022 69:11
  7. The present work aimed to examine the performance of a thermoelectric generator (TEG) augmented with a hydronic evacuated tube solar collector heat exchanger used to heat a cold zone. TEGs were operated on the...

    Authors: Hamza Al-Tahaineh and Abdullah H. M. AlEssa
    Citation: Journal of Engineering and Applied Science 2022 69:10
  8. The objective of this study is to evaluate RM in small projects in Iran using identification of status, barriers, and the impact of RM on project performance. In this study, theoretical foundations and researc...

    Authors: Nima Amani and Keyvan Safarzadeh
    Citation: Journal of Engineering and Applied Science 2022 69:7
  9. This study attempts to remedy the issue of urban voids, which are one of the possible choices for extra interactive spaces. As a city with a great civilization history, Egypt is also home to many urban voids, ...

    Authors: Omnia Mamdouh Hashem, Sherine Mohy-Eldin Wahba and Tarek Ibrahim Nasr-Eldin
    Citation: Journal of Engineering and Applied Science 2022 69:6
  10. In this paper, we present a numerical study along with an exhaustive adsorption investigation in a binary dilute mixture model nearby the solvent’s critical point in a configuration relevant for soil remediati...

    Authors: Housseyn Smahi, Djilali Ameur, Joanna Dib and Isabelle Raspo
    Citation: Journal of Engineering and Applied Science 2022 69:5
  11. Reaction wheels are crucial actuators in spacecraft attitude control subsystem (ACS). The precise modeling of reaction wheels is of fundamental need in spacecraft ACS for design, analysis, simulation, and faul...

    Authors: Abd-Elsalam R. Abd-Elhay, Wael A. Murtada and Mohamed I. Yosof
    Citation: Journal of Engineering and Applied Science 2022 69:4
  12. The durability of reinforced concrete (RC) pipes depends upon the corrosion resistance of the reinforcing steel and the resistance of concrete mixes against an aggressive environment. This research paper aims ...

    Authors: Lamiaa M. Omer, Mohamed S. Gomaa, Waleed H. Sufe, Alaa A. Elsayed and Hany A. Elghazaly
    Citation: Journal of Engineering and Applied Science 2022 69:3
  13. The problem considered in this work is the development of simulation method for simulating car crash which utilizes simple car—impact attenuator model developed in MATLAB. Usually, car crash simulation is done...

    Authors: Malik Athafarras, Djati Wibowo Djamari, Muhamad Rausyan Fikri, Bentang Arief Budiman, Farid Triawan and Ibham Veza
    Citation: Journal of Engineering and Applied Science 2022 69:2
  14. The enhanced distributed channel access (EDCA) protocol is a supplement to IEEE 802.11 medium access control (MAC), ratified by IEEE 802.11e task group to support quality of service (QoS) requirements of both ...

    Authors: Godwin Onyekachi Ugwu, Udora Nwabuoku Nwawelu, Mamilus Aginwa Ahaneku and Cosmas Ikechukwu Ani
    Citation: Journal of Engineering and Applied Science 2022 69:1
  15. This work is intended to understand the variation of pressure and flow at the pump inlet of liquid rocket engine. The opening and closure of the valve upstream of the pump features complex phenomenon. The open...

    Authors: Nikhil Suri, Venkateswaran K. S. and Ramesh T.
    Citation: Journal of Engineering and Applied Science 2021 68:49
  16. Nowadays, beneficial microorganisms are getting wider applicability. One example is referred to as Effective Microorganisms (EM) having its composition kept a secret. EM is a product in liquid form, which cons...

    Authors: Safwat M. Safwat and Minerva E. Matta
    Citation: Journal of Engineering and Applied Science 2021 68:48
  17. Since its invention, generative adversarial networks (GANs) have shown outstanding results in many applications. GANs are powerful, yet resource-hungry deep learning models. The main difference between GANs an...

    Authors: Dina Tantawy, Mohamed Zahran and Amr Wassal
    Citation: Journal of Engineering and Applied Science 2021 68:47
  18. The transition to renewable energy sources remains a major challenge for developed and developing countries. Therefore, the study aims at investigating the relationship between sustainable development indicato...

    Authors: Tarek Abdel-Latif Aboul-Atta and Rania Hamed Rashed
    Citation: Journal of Engineering and Applied Science 2021 68:45
  19. The aerodynamic losses in centrifugal compressors are mainly associated with the separated flow on the suction sides of impeller and diffuser vanes. The overall performance of such compressors can be improved ...

    Authors: M. G. Khalafallah, H. S. Saleh, S. M. Ali and H. M. Abdelkhalek
    Citation: Journal of Engineering and Applied Science 2021 68:43
  20. Different additional cementitious materials can be used to partially replace cement in concrete. these are used in concrete as a partial replacement for cement to reduce the effect of environmental pollution, ...

    Authors: Mohamed S. Moawad, Shimaa Younis and Abd EL- Rahman Ragab
    Citation: Journal of Engineering and Applied Science 2021 68:42
  21. The objective of the study is to investigate, in the Egyptian context, residential satisfaction in gated communities (GCs) in relation to stages in the life cycle. The aim is to identify possible differences b...

    Authors: Fatma Osama Osman, Yasser M. Moustafa and Amgad Aly Fahmy
    Citation: Journal of Engineering and Applied Science 2021 68:41
  22. The paper demonstrates how co-working spaces, with their openness ideologies that are not only manifested in sharing space, but also sharing knowledge and generating access to nonhierarchical productive opport...

    Authors: Heba Mourad, Zeinab Shafik and Momen El-Husseiny
    Citation: Journal of Engineering and Applied Science 2021 68:39
  23. Authors:
    Citation: Journal of Engineering and Applied Science 2021 68:36

    The original article was published in Journal of Engineering and Applied Science 2021 68:33

    The original article was published in Journal of Engineering and Applied Science 2021 68:32

    The original article was published in Journal of Engineering and Applied Science 2021 68:31

    The original article was published in Journal of Engineering and Applied Science 2021 68:30

    The original article was published in Journal of Engineering and Applied Science 2021 68:20

    The original article was published in Journal of Engineering and Applied Science 2021 68:15

  24. In this work, we used the blast furnace slag for the nickel adsorption in aqueous solution. The physico-chemical characterization showed that the BF slag consists mainly of the silica, lime, and alumina. The s...

    Authors: Toufik Chouchane, Ouahida Khireddine and Atmen Boukari
    Citation: Journal of Engineering and Applied Science 2021 68:34
  25. Reliable and real-time propagation loss modeling play a significant role in the efficient planning, development, and optimization of macrocellular communication networks in a given terrain. Thus, the need to a...

    Authors: Joseph Isabona and Agbotiname Lucky Imoize
    Citation: Journal of Engineering and Applied Science 2021 68:33

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  26. Nanofluids are emerging two-phase thermal fluids that play a vital part in heat exchangers owing to its heat transfer features. Ceramic nanoparticles aluminium oxide (Al2O3) and silicon dioxide (SiO2) were produc...

    Authors: R. Vidhya, T. Balakrishnan and B. Suresh Kumar
    Citation: Journal of Engineering and Applied Science 2021 68:32

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  27. Urban areas in metropolitan cities like Cairo suffer from economic, social, and environmental predicaments. Urban economic sustainability is an approach that reforms the urban performance to gain direct benefi...

    Authors: Mohamed Mahmoud Ahmed Abdel Ghaffar and Noha Ahmed Abd El Aziz
    Citation: Journal of Engineering and Applied Science 2021 68:31

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  28. The main goal of this study was to determine the industrially best reductant for reduction of magnesium oxide to magnesium with wood charcoal and petroleum coke (petcoke) each in molar ratio 1:1 and 1:2 (oxida...

    Authors: Hamid Zahedi, Nahid Farzi and Nasser Golestani
    Citation: Journal of Engineering and Applied Science 2021 68:30

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  29. In this paper, the indoor air pollution was investigated inside an educational building which contains air pollutants with elevated concentrations. A field study was conducted in a naturally ventilated, single...

    Authors: Ahmed Fikry and Asmaa Elsayed
    Citation: Journal of Engineering and Applied Science 2021 68:29
  30. A global concern claims that activities and functions that once filled traditional public spaces are privatized being less and less oriented to the public. In Cairo’s new settlements, public spaces don’t seem ...

    Authors: Sally M. Murshed, Ahmed M. Ouf and Abbas F. Zafarany
    Citation: Journal of Engineering and Applied Science 2021 68:28
  31. In this paper, a connection between vibration amplitude and tool wear when drilling of IS3048 steel utilizing different dimensioned tools is dissected through tests. Discriminant features, which are sensitive ...

    Authors: Annavarapu Venkata Sridhar, Balla Srinivasa Prasad and K. V. V. N. R. Chandra Mouli
    Citation: Journal of Engineering and Applied Science 2021 68:27
  32. Caustic wash is one of many industrial processes that are used to produce jet fuel. In this study, an analysis of the key parameters of the kerosene caustic wash process was conducted to improve the total perf...

    Authors: Ahmed Mohamed Selim Abdelhamid and Hamdy Abdel-Aziz Mustafa
    Citation: Journal of Engineering and Applied Science 2021 68:26
  33. A straightforward approach to recycle waste expanded polystyrene (EPS) foam to produce polystyrene (PS) microfibers using the improvised centrifugal spinning technique is demonstrated in this work. A typical b...

    Authors: Marco Laurence M. Budlayan, Jonathan N. Patricio, Jeanne Phyre Lagare-Oracion, Susan D. Arco, Arnold C. Alguno, Antonio Basilio, Felmer S. Latayada and Rey Y. Capangpangan
    Citation: Journal of Engineering and Applied Science 2021 68:25
  34. Numerical simulations of pulsatile transitional blood flow through symmetric stenosed arteries with different area reductions were performed to investigate the behavior of the blood. Simulations were carried o...

    Authors: Md. Alamgir Kabir, Md. Ferdous Alam and Md. Ashraf Uddin
    Citation: Journal of Engineering and Applied Science 2021 68:24
  35. Islamabad, being the capital of Pakistan, is attracting every business. Thus, the city is growing towards traffic congestion as the city’s car ownership rate is rapidly growing. In such a situation, for succes...

    Authors: Altaf Ayaz, Abdul Waheed, Hamza Saleem and Malik Muneeb Abid
    Citation: Journal of Engineering and Applied Science 2021 68:23
  36. The technological factors required to improve the operational properties of granulated metallurgical slags demanded in the building industry have been analyzed. In order to satisfy these factors, a new technol...

    Authors: David Sakhvadze, Gigo Jandieri, Giorgi Jangveladze and Giorgi Sakhvadze
    Citation: Journal of Engineering and Applied Science 2021 68:22
  37. The realization of the right to adequate housing is a critical issue that countries seek to achieve through affordable housing projects. However, there is a discrepancy in fulfilling the right to adequate hous...

    Authors: Nahla Mahmoud Hafez, Rowaida Reda Kamel, Doaa Mahmoud Elsherif and Rania Ibrahim Nasreldin
    Citation: Journal of Engineering and Applied Science 2021 68:21
  38. Construction materials contribute to environmental pollution and the impoverishment of natural raw materials. The villages of Upper Egypt were exposed to high thermal loads owing to their geographical location...

    Authors: Walaa Hussein Hussein Hanafi
    Citation: Journal of Engineering and Applied Science 2021 68:20

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  39. Convivial urban spaces are a process as well as a philosophy. They revolve around observing users in specific urban spaces to comprehend their various needs, especially their social needs. Designing urban spac...

    Authors: Mona Y. Shedid and Noha H. Hefnawy
    Citation: Journal of Engineering and Applied Science 2021 68:18
  40. In this work, we have determined the mean square relative displacement, elastic constant, anharmonic effective potential, correlated function, local force constant, and other thermodynamic parameters of diamon...

    Authors: Duc Ba Nguyen and Hiep Phi Trinh
    Citation: Journal of Engineering and Applied Science 2021 68:17
  41. Due to the dynamic loads in power transmission such as automotive, the restoration of axles during maintenance is extensively needed. These parts face two main challenges: wear and fatigue failure loads. The p...

    Authors: A. A. Sayid, E. El-Kashif, M. A. Adly, M. A. Morsy and Abdallah Abdelkawy
    Citation: Journal of Engineering and Applied Science 2021 68:16

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions