Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 8 of 10

  1. Because the clear height of a building involves many particularities of buildings, structures and equipment, the traditional design mode can only roughly estimate the clear height of a building and cannot full...

    Authors: Dejiang Wang, Fan Li, Chang Liu, Youyang Hu, Jianji Cheng and Yu Zhan
    Citation: Journal of Engineering and Applied Science 2022 69:68
    Content type: Research Published on:

  2. Public-private partnerships (PPP) have many critical socio-economic concession variables that need to be determined during the negotiation of the PPP contracts. However, their determination presents complexiti...

    Authors: Faisal Alghamdi, Omer Tatari and Leena Alghamdi
    Citation: Journal of Engineering and Applied Science 2022 69:67
    Content type: Research Published on:

  3. The winter closure is an annual action taken every year by the Egyptian authorities by closing water flows in series of channels for maintenance of water channels where levels in water channels are forced to r...

    Authors: Reham Samy, Nabil Abdelmonem, Ibrahim Ismail and Amr Abdelghany
    Citation: Journal of Engineering and Applied Science 2022 69:65
    Content type: Research Published on:

  5. Evaporative cooling technology has a potential to serve as a substitute to conventional vapor compression cooling. Direct evaporative cooling however usually introduces more moisture to the cooling space. In t...

    Authors: T. O. Ahmadu, Y. S. Sanusi and F. Usman
    Citation: Journal of Engineering and Applied Science 2022 69:63
    Content type: Research Published on:

  6. The effect of welding parameters on the mechanical and metallurgical properties of armor steel weldment was studied using gas tungsten arc welding process with two filler wires: carbon steel and austenitic sta...

    Authors: M. A. Morsy, Sabry M. Abdel Aziz, Khaled Abdelwahed and Sabreen A. Abdelwahab
    Citation: Journal of Engineering and Applied Science 2022 69:62
    Content type: Research Published on:

  7. Sustainability and project management are two trends that have taken global interest in the last decades due to their significant role in various fields of life. However, these two topics have rarely been addr...

    Authors: Heba Farouk Abdelkhalik and Hisham Hussein Azmy
    Citation: Journal of Engineering and Applied Science 2022 69:61
    Content type: Research Published on:

  8. Hydrocarbons continue to play an important role in providing affordable energy to meet rising energy demand. Amidst growing concerns on the environmental impact of oil and gas production processes, many resear...

    Authors: Princewill M. Ikpeka, Johnson O. Ugwu, Gobind G. Pillai and Paul Russell
    Citation: Journal of Engineering and Applied Science 2022 69:60
    Content type: Reviews Published on:

  10. The generation of vortices in sharp bends of rivers is a well-known phenomenon. However, their influence on the bridge pier has not been investigated deeply. This study studies the flow pattern around the twin...

    Authors: Farid Sedighi, Mohammad Vaghefi and Elham Zarei
    Citation: Journal of Engineering and Applied Science 2022 69:58
    Content type: Research Published on:

  11. Plant turnarounds are one of the most critical events in the Saudi Arabian oil and gas industries. Shutdowns have the potential to affect the plant’s cash flow and objectives either in a constructive nor a bad...

    Authors: Mohamed Fayas Saffiudeen, Fasil T. Mohammed and Abdullah Syed
    Citation: Journal of Engineering and Applied Science 2022 69:57
    Content type: Research Published on:

  12. Engagement is integral to design education; thus, the purpose of this work is to examine how engagement can be maintained digitally, using prevalent social networking tools, to support architectural education ...

    Authors: Ramy Bakir and Sara Alsaadani
    Citation: Journal of Engineering and Applied Science 2022 69:56
    Content type: Research Published on:

  13. Calcite is one of the commonest bond elements in natural collapsible soils. Where calcite occurs in significant amounts, the soils are considered calcareous. Collapsible soils are characterised by high porosit...

    Authors: Alfred Wilson Opukumo, Colin T. Davie and Stephanie Glendinning
    Citation: Journal of Engineering and Applied Science 2022 69:55
    Content type: Research Published on:

  16. Employment of natural fiber for the filament of fused deposition modeling (FDM) can be found in numerous studies from different areas. However, the presence of fiber such as kenaf in polymer filament could cau...

    Authors: Syaza Najwa Mohd Farhan Han, Mastura Mohammad Taha, Muhd Ridzuan Mansor and Muhamad Arfauz A. Rahman
    Citation: Journal of Engineering and Applied Science 2022 69:52
    Content type: Research Published on:

  17. In recent years, non-wovens have become the main segment of textile production because they can find applications in different areas. Thermal insulation properties, fire resistance, and flexibility make them c...

    Authors: Rositsa Petkova-Slipets, Penka Zlateva and Desislava Staneva
    Citation: Journal of Engineering and Applied Science 2022 69:51
    Content type: Research Published on:

  19. The use of cold-formed sections (CFS) in construction is growing quickly in spite of the difficulty facing the designer in choosing the optimum sections’ proportions of any CFS in order to acquire the most eco...

    Authors: Sherine Swelem, Ahmed Fahmy and Heba Ellafy
    Citation: Journal of Engineering and Applied Science 2022 69:49
    Content type: Research Published on:

  20. In Iran, recently in large-scale projects, the science of value engineering has become very important and in order to show the significant impact of value engineering results in increasing efficiency and reduc...

    Authors: Mohsen Jafari Nigjeh and Nima Amani
    Citation: Journal of Engineering and Applied Science 2022 69:48
    Content type: Research Published on:

  22. Net zero carbon building (NZCB) is considered an important approach for reducing carbon emissions (CE), which may be due to the exponential rise of energy use and greenhouse gas emissions in buildings industry...

    Authors: Safie El-din Ahmed Fouly and Ahmed Reda Abdin
    Citation: Journal of Engineering and Applied Science 2022 69:46
    Content type: Research Published on:

  24. The Murredu watershed in Telangana State was chosen for the morphometric and land use/land cover (LULC) analysis in this current study. Geographical information system (GIS) and remote sensing (RS) techniques ...

    Authors: Padala Raja Shekar and Aneesh Mathew
    Citation: Journal of Engineering and Applied Science 2022 69:44
    Content type: Research Published on:

  25. High-entropy alloy HEA (CrFeCoNi) was reinforced with variety of weight percentages of 5:20 wt.% WC particles. The alloy samples were mechanically prepared in a ball roll mill for 25 h by 10:1 ball to powder r...

    Authors: A. Hegazy Khallaf, M. Bhlol, O. M. Dawood, I. M. Ghayad and Omayma A. Elkady
    Citation: Journal of Engineering and Applied Science 2022 69:43
    Content type: Research Published on:

  26. The brewing process consumes and releases a large amount of wastewater into the environment. The objective of this study was to determine optimum operating conditions for the treatment of brewery wastewater us...

    Authors: Oluwatosin A. Afolabi, Kenneth O. Adekalu and David A. Okunade
    Citation: Journal of Engineering and Applied Science 2022 69:42
    Content type: Research Published on:

  28. In this article, different treatment baths for corrosion protection of 2030 aluminum alloy in addition to replacing the hexavalent chromium due to the European recommendation were employed. This work is divide...

    Authors: Manel Benmohamed, Abdelbaki Benmounah, Ahmed Haddad and Sarah Yahi
    Citation: Journal of Engineering and Applied Science 2022 69:40
    Content type: Research Published on:

  30. NPTs have vast applications because of no tyre puncture, no need for air pressure, low rolling resistance, and also have higher flexibility for design and recyclability. In this research work, different struct...

    Authors: Muhammad Ali, Muhammad Maarij and Azhar Hussain
    Citation: Journal of Engineering and Applied Science 2022 69:38
    Content type: Research Published on:

  31. In Morocco, the potential of agricultural waste is estimated at 34.7 MT/year. Composting is an effective way for waste management. If badly monitored, it can affect the environment. Initial C/N ratio (C/Ni) an...

    Authors: Soufiane El-mrini, Rachid Aboutayeb and Abdeljalil Zouhri
    Citation: Journal of Engineering and Applied Science 2022 69:37
    Content type: Research Published on:

  32. This paper examines the performance of bus rapid transit (BRT) systems in over-crowded travel corridors. A case study of King Faisal Street in Greater Cairo Region GCR, Egypt, was adopted. A simulation model w...

    Authors: M. Mohamed, N. Elmitiny and H. Talaat
    Citation: Journal of Engineering and Applied Science 2022 69:36
    Content type: Research Published on:

  34. The expansion liner hanger has great advantages over the traditional slip liner hanger. Therefore, scholars at home and abroad have carried out extensive research on the expansion liner hanger, but there are f...

    Authors: Yong Chen, Xin Liu, Hao Yi, Chuan He, Guoping Xiao, Jinjin Tan, Haochen Wu and Anqiao Su
    Citation: Journal of Engineering and Applied Science 2022 69:32
    Content type: Research Published on:

  35. The present study aimed at evaluating aquifer flow unit of Edem by means of stratigraphic modified Lorenz plot (SMLP) employing vertical electrical sounding. The results from the vertical electrical sounding f...

    Authors: Emmanuel T. Omeje, Daniel N. Obiora, Francisca N. Okeke, Desmond O. Ugbor, Johnson C. Ibuot and Aniefiok S. Akpan
    Citation: Journal of Engineering and Applied Science 2022 69:33
    Content type: Research Published on:

  37. Cement production is held responsible of polluting the atmosphere with carbon dioxide (CO2). The researchers have shown that manufacturing of one ton of cement releases about half ton of carbon dioxide into the a...

    Authors: Nancy T. Hussien and Ahmed F. Oan
    Citation: Journal of Engineering and Applied Science 2022 69:31
    Content type: Research Published on:

  38. Recently, the use of sandwich composites in different fields of engineering such as aerospace, marine, automobile, pipelines, bridge structure, industrial work, has attracted significant attention. Sensitivity...

    Authors: Aloka Ranjan Sahu, Suryamani Behera, Bibhuti Bhusan Mukharjee and Subhajit Mondal
    Citation: Journal of Engineering and Applied Science 2022 69:30
    Content type: Research Published on:

  40. Sub-Saharan suffers from a poor transport system failing to address equity and sustainability. The system can be affected by several factors; however, this study explores how African historical transport infra...

    Authors: Gudina Terefe Tucho
    Citation: Journal of Engineering and Applied Science 2022 69:28
    Content type: Reviews Published on:

  41. The transportation sector is considered one of the most important sectors affecting the planning and development of cities. It is the responsible sector for traffic and transport inter- and intra-cities throug...

    Authors: Tarek Abdel-latif Aboul-Atta and Sally Bahaa eldin Elmaraghy
    Citation: Journal of Engineering and Applied Science 2022 69:27
    Content type: Research Published on:

  42. The composite solid polymer electrolytes based on Polymethyl methacrylate–Lithium triflate with nanochitosan as inert nanofiller were prepared by membrane hot-press method. Nanochitosan was synthesized from sh...

    Authors: P. M. Shyly, N. Ammakutti Sridevi and P. Sumithraj Premkumar
    Citation: Journal of Engineering and Applied Science 2022 69:26
    Content type: Research Published on:

  43. Magnesium alloys and their composites are fast replacing aluminum alloys and other materials in the aerospace and automotive industries. Significant progress has been made in the fabrication of these composite...

    Authors: Suhail Ahmed Manroo, Noor Zaman Khan and Babar Ahmad
    Citation: Journal of Engineering and Applied Science 2022 69:25
    Content type: Reviews Published on:

  45. I-girders with circular corrugated webs are considered as a new fabrication technology. The corrugation of the web considerably increases the stiffness of the cross-section to resist shear forces and also incr...

    Authors: Sh. M. Swelem, A. Sh. Fahmy and N. F. El Sherif
    Citation: Journal of Engineering and Applied Science 2022 69:23
    Content type: Research Published on:

  46. Land subsidence is a global problem in urban areas. The main cause of land subsidence is the pumping of subsurface water. It is of great significance to study the subsurface settlement and water flow of the la...

    Authors: Sirui Deng, Haoqing Yang, Xiaoying Chen and Xin Wei
    Citation: Journal of Engineering and Applied Science 2022 69:18
    Content type: Research Published on:

  47. Incremental deformation is a well-known concept among material scientists, when applied with advanced automation it becomes very efficient. It has advanced in leap and bounds over time and has established itse...

    Authors: Prajwal Agrawal, Sangeet Aggarwal, Neil Banthia, Udit Suraj Singh, Arnav Kalia and Alexander Pesin
    Citation: Journal of Engineering and Applied Science 2022 69:20
    Content type: Reviews Published on:

  48. Wonji Shoa Sugar Estate (WSSE) is one of the large-scale irrigation schemes in Ethiopia which was established in 1951. The aim of this study was to evaluate the performance of current furrow irrigation water m...

    Authors: Belay Yadeta, Mekonen Ayana, Muluneh Yitayew and Tilahun Hordofa
    Citation: Journal of Engineering and Applied Science 2022 69:21
    Content type: Research Published on:

  50. The province of Ouarzazate has a population of 10,744 and is divided into 17 communes (15 rural communes and 2 urban communes), the majority of which have a population of less than 2000 people. Currently, more...

    Authors: Farah Abdelouhed, Algouti Ahmed, Algouti Abdellah, Baiddane Yassine and Ifkirne Mohammed
    Citation: Journal of Engineering and Applied Science 2022 69:19
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions