Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 8 of 9

  1. High-entropy alloy HEA (CrFeCoNi) was reinforced with variety of weight percentages of 5:20 wt.% WC particles. The alloy samples were mechanically prepared in a ball roll mill for 25 h by 10:1 ball to powder r...

    Authors: A. Hegazy Khallaf, M. Bhlol, O. M. Dawood, I. M. Ghayad and Omayma A. Elkady
    Citation: Journal of Engineering and Applied Science 2022 69:43
    Content type: Research Published on:

  2. The brewing process consumes and releases a large amount of wastewater into the environment. The objective of this study was to determine optimum operating conditions for the treatment of brewery wastewater us...

    Authors: Oluwatosin A. Afolabi, Kenneth O. Adekalu and David A. Okunade
    Citation: Journal of Engineering and Applied Science 2022 69:42
    Content type: Research Published on:

  4. In this article, different treatment baths for corrosion protection of 2030 aluminum alloy in addition to replacing the hexavalent chromium due to the European recommendation were employed. This work is divide...

    Authors: Manel Benmohamed, Abdelbaki Benmounah, Ahmed Haddad and Sarah Yahi
    Citation: Journal of Engineering and Applied Science 2022 69:40
    Content type: Research Published on:

  6. NPTs have vast applications because of no tyre puncture, no need for air pressure, low rolling resistance, and also have higher flexibility for design and recyclability. In this research work, different struct...

    Authors: Muhammad Ali, Muhammad Maarij and Azhar Hussain
    Citation: Journal of Engineering and Applied Science 2022 69:38
    Content type: Research Published on:

  7. In Morocco, the potential of agricultural waste is estimated at 34.7 MT/year. Composting is an effective way for waste management. If badly monitored, it can affect the environment. Initial C/N ratio (C/Ni) an...

    Authors: Soufiane El-mrini, Rachid Aboutayeb and Abdeljalil Zouhri
    Citation: Journal of Engineering and Applied Science 2022 69:37
    Content type: Research Published on:

  8. This paper examines the performance of bus rapid transit (BRT) systems in over-crowded travel corridors. A case study of King Faisal Street in Greater Cairo Region GCR, Egypt, was adopted. A simulation model w...

    Authors: M. Mohamed, N. Elmitiny and H. Talaat
    Citation: Journal of Engineering and Applied Science 2022 69:36
    Content type: Research Published on:

  10. The expansion liner hanger has great advantages over the traditional slip liner hanger. Therefore, scholars at home and abroad have carried out extensive research on the expansion liner hanger, but there are f...

    Authors: Yong Chen, Xin Liu, Hao Yi, Chuan He, Guoping Xiao, Jinjin Tan, Haochen Wu and Anqiao Su
    Citation: Journal of Engineering and Applied Science 2022 69:32
    Content type: Research Published on:

  11. The present study aimed at evaluating aquifer flow unit of Edem by means of stratigraphic modified Lorenz plot (SMLP) employing vertical electrical sounding. The results from the vertical electrical sounding f...

    Authors: Emmanuel T. Omeje, Daniel N. Obiora, Francisca N. Okeke, Desmond O. Ugbor, Johnson C. Ibuot and Aniefiok S. Akpan
    Citation: Journal of Engineering and Applied Science 2022 69:33
    Content type: Research Published on:

  13. Cement production is held responsible of polluting the atmosphere with carbon dioxide (CO2). The researchers have shown that manufacturing of one ton of cement releases about half ton of carbon dioxide into the a...

    Authors: Nancy T. Hussien and Ahmed F. Oan
    Citation: Journal of Engineering and Applied Science 2022 69:31
    Content type: Research Published on:

  14. Recently, the use of sandwich composites in different fields of engineering such as aerospace, marine, automobile, pipelines, bridge structure, industrial work, has attracted significant attention. Sensitivity...

    Authors: Aloka Ranjan Sahu, Suryamani Behera, Bibhuti Bhusan Mukharjee and Subhajit Mondal
    Citation: Journal of Engineering and Applied Science 2022 69:30
    Content type: Research Published on:

  16. Sub-Saharan suffers from a poor transport system failing to address equity and sustainability. The system can be affected by several factors; however, this study explores how African historical transport infra...

    Authors: Gudina Terefe Tucho
    Citation: Journal of Engineering and Applied Science 2022 69:28
    Content type: Reviews Published on:

  17. The transportation sector is considered one of the most important sectors affecting the planning and development of cities. It is the responsible sector for traffic and transport inter- and intra-cities throug...

    Authors: Tarek Abdel-latif Aboul-Atta and Sally Bahaa eldin Elmaraghy
    Citation: Journal of Engineering and Applied Science 2022 69:27
    Content type: Research Published on:

  18. The composite solid polymer electrolytes based on Polymethyl methacrylate–Lithium triflate with nanochitosan as inert nanofiller were prepared by membrane hot-press method. Nanochitosan was synthesized from sh...

    Authors: P. M. Shyly, N. Ammakutti Sridevi and P. Sumithraj Premkumar
    Citation: Journal of Engineering and Applied Science 2022 69:26
    Content type: Research Published on:

  19. Magnesium alloys and their composites are fast replacing aluminum alloys and other materials in the aerospace and automotive industries. Significant progress has been made in the fabrication of these composite...

    Authors: Suhail Ahmed Manroo, Noor Zaman Khan and Babar Ahmad
    Citation: Journal of Engineering and Applied Science 2022 69:25
    Content type: Reviews Published on:

  21. I-girders with circular corrugated webs are considered as a new fabrication technology. The corrugation of the web considerably increases the stiffness of the cross-section to resist shear forces and also incr...

    Authors: Sh. M. Swelem, A. Sh. Fahmy and N. F. El Sherif
    Citation: Journal of Engineering and Applied Science 2022 69:23
    Content type: Research Published on:

  22. Land subsidence is a global problem in urban areas. The main cause of land subsidence is the pumping of subsurface water. It is of great significance to study the subsurface settlement and water flow of the la...

    Authors: Sirui Deng, Haoqing Yang, Xiaoying Chen and Xin Wei
    Citation: Journal of Engineering and Applied Science 2022 69:18
    Content type: Research Published on:

  23. Incremental deformation is a well-known concept among material scientists, when applied with advanced automation it becomes very efficient. It has advanced in leap and bounds over time and has established itse...

    Authors: Prajwal Agrawal, Sangeet Aggarwal, Neil Banthia, Udit Suraj Singh, Arnav Kalia and Alexander Pesin
    Citation: Journal of Engineering and Applied Science 2022 69:20
    Content type: Reviews Published on:

  24. Wonji Shoa Sugar Estate (WSSE) is one of the large-scale irrigation schemes in Ethiopia which was established in 1951. The aim of this study was to evaluate the performance of current furrow irrigation water m...

    Authors: Belay Yadeta, Mekonen Ayana, Muluneh Yitayew and Tilahun Hordofa
    Citation: Journal of Engineering and Applied Science 2022 69:21
    Content type: Research Published on:

  26. The province of Ouarzazate has a population of 10,744 and is divided into 17 communes (15 rural communes and 2 urban communes), the majority of which have a population of less than 2000 people. Currently, more...

    Authors: Farah Abdelouhed, Algouti Ahmed, Algouti Abdellah, Baiddane Yassine and Ifkirne Mohammed
    Citation: Journal of Engineering and Applied Science 2022 69:19
    Content type: Research Published on:

  27. Collapsible soils have caused infrastructural damages resulting in several economic losses and loss of lives in certain cases. The prerequisite for collapse occurring is an open metastable structure; capable o...

    Authors: Alfred Wilson Opukumo, Colin T. Davie, Stephanie Glendinning and Ebiegberi Oborie
    Citation: Journal of Engineering and Applied Science 2022 69:17
    Content type: Reviews Published on:

  28. Bio-CaCO3 nanoparticles have several applications and have attracted significant attention in current research. N,N-dimethylformamide (DMF) has been proven to be an effective non-volatile solvent for synthesizing...

    Authors: Kenneth Mensah, Ayda Mostafa Abdelmageed and Hassan Shokry
    Citation: Journal of Engineering and Applied Science 2022 69:16
    Content type: Research Published on:

  29. Green spaces are recognised as an important contributor in enhancing the quality of urban life. Many cities are now working on preserving and increasing their green spaces as a part of their sustainable develo...

    Authors: Dalia Aly and Branka Dimitrijevic
    Citation: Journal of Engineering and Applied Science 2022 69:15
    Content type: Research Published on:

  30. Design of new unmanned underwater vehicles (UUVs) is a continuous process since decades, where finding an optimal design for a specific application is still a challenging subject. New inspection class category...

    Authors: Ihab ELAFF
    Citation: Journal of Engineering and Applied Science 2022 69:14
    Content type: Research Published on:

  31. This paper discusses a passive vibration control method to improve the shock tolerance of hard disk drives (HDDs) in operating condition (op-shock tolerance). Past works in improving the HDDs’ op-shock toleran...

    Authors: Djati Wibowo Djamari, Fook Fah Yap, Bentang Arief Budiman and Farid Triawan
    Citation: Journal of Engineering and Applied Science 2022 69:13
    Content type: Research Published on:

  32. Earthquake investigations confirm that un-symmetric buildings suffer more damage than their symmetric counterparts. Torsional vibrations due to irregularity are one of the main factors which cause damage to bu...

    Authors: Khaled M. Alaa, Khaled F. El-Kashif and Hamed M. Salem
    Citation: Journal of Engineering and Applied Science 2022 69:12
    Content type: Research Published on:

  33. This paper deals with a systematic study on the co-doping N,S on TiO2 photocatalyst to improve its activity under visible light on the removal of Pb(II) from the aqueous media. The co-doping TiO2 by N,S atoms was...

    Authors: Endang Tri Wahyuni, Nanda Alzeta Pratama, Novianti Dwi Lestari and Suherman Suherman
    Citation: Journal of Engineering and Applied Science 2022 69:11
    Content type: Research Published on:

  34. The present work aimed to examine the performance of a thermoelectric generator (TEG) augmented with a hydronic evacuated tube solar collector heat exchanger used to heat a cold zone. TEGs were operated on the...

    Authors: Hamza Al-Tahaineh and Abdullah H. M. AlEssa
    Citation: Journal of Engineering and Applied Science 2022 69:10
    Content type: Research Published on:

  37. The objective of this study is to evaluate RM in small projects in Iran using identification of status, barriers, and the impact of RM on project performance. In this study, theoretical foundations and researc...

    Authors: Nima Amani and Keyvan Safarzadeh
    Citation: Journal of Engineering and Applied Science 2022 69:7
    Content type: Research Published on:

  38. This study attempts to remedy the issue of urban voids, which are one of the possible choices for extra interactive spaces. As a city with a great civilization history, Egypt is also home to many urban voids, ...

    Authors: Omnia Mamdouh Hashem, Sherine Mohy-Eldin Wahba and Tarek Ibrahim Nasr-Eldin
    Citation: Journal of Engineering and Applied Science 2022 69:6
    Content type: Research Published on:

  39. In this paper, we present a numerical study along with an exhaustive adsorption investigation in a binary dilute mixture model nearby the solvent’s critical point in a configuration relevant for soil remediati...

    Authors: Housseyn Smahi, Djilali Ameur, Joanna Dib and Isabelle Raspo
    Citation: Journal of Engineering and Applied Science 2022 69:5
    Content type: Research Published on:

  40. Reaction wheels are crucial actuators in spacecraft attitude control subsystem (ACS). The precise modeling of reaction wheels is of fundamental need in spacecraft ACS for design, analysis, simulation, and faul...

    Authors: Abd-Elsalam R. Abd-Elhay, Wael A. Murtada and Mohamed I. Yosof
    Citation: Journal of Engineering and Applied Science 2022 69:4
    Content type: Research Published on:

  41. The durability of reinforced concrete (RC) pipes depends upon the corrosion resistance of the reinforcing steel and the resistance of concrete mixes against an aggressive environment. This research paper aims ...

    Authors: Lamiaa M. Omer, Mohamed S. Gomaa, Waleed H. Sufe, Alaa A. Elsayed and Hany A. Elghazaly
    Citation: Journal of Engineering and Applied Science 2022 69:3
    Content type: Research Published on:

  42. The problem considered in this work is the development of simulation method for simulating car crash which utilizes simple car—impact attenuator model developed in MATLAB. Usually, car crash simulation is done...

    Authors: Malik Athafarras, Djati Wibowo Djamari, Muhamad Rausyan Fikri, Bentang Arief Budiman, Farid Triawan and Ibham Veza
    Citation: Journal of Engineering and Applied Science 2022 69:2
    Content type: Research Published on:

  43. The enhanced distributed channel access (EDCA) protocol is a supplement to IEEE 802.11 medium access control (MAC), ratified by IEEE 802.11e task group to support quality of service (QoS) requirements of both ...

    Authors: Godwin Onyekachi Ugwu, Udora Nwabuoku Nwawelu, Mamilus Aginwa Ahaneku and Cosmas Ikechukwu Ani
    Citation: Journal of Engineering and Applied Science 2022 69:1
    Content type: Research Published on:

  44. This work is intended to understand the variation of pressure and flow at the pump inlet of liquid rocket engine. The opening and closure of the valve upstream of the pump features complex phenomenon. The open...

    Authors: Nikhil Suri, Venkateswaran K. S. and Ramesh T.
    Citation: Journal of Engineering and Applied Science 2021 68:49
    Content type: Research Published on:

  45. Nowadays, beneficial microorganisms are getting wider applicability. One example is referred to as Effective Microorganisms (EM) having its composition kept a secret. EM is a product in liquid form, which cons...

    Authors: Safwat M. Safwat and Minerva E. Matta
    Citation: Journal of Engineering and Applied Science 2021 68:48
    Content type: Reviews Published on:

  46. Since its invention, generative adversarial networks (GANs) have shown outstanding results in many applications. GANs are powerful, yet resource-hungry deep learning models. The main difference between GANs an...

    Authors: Dina Tantawy, Mohamed Zahran and Amr Wassal
    Citation: Journal of Engineering and Applied Science 2021 68:47
    Content type: Reviews Published on:

  48. The transition to renewable energy sources remains a major challenge for developed and developing countries. Therefore, the study aims at investigating the relationship between sustainable development indicato...

    Authors: Tarek Abdel-Latif Aboul-Atta and Rania Hamed Rashed
    Citation: Journal of Engineering and Applied Science 2021 68:45
    Content type: Research Published on:

  50. The aerodynamic losses in centrifugal compressors are mainly associated with the separated flow on the suction sides of impeller and diffuser vanes. The overall performance of such compressors can be improved ...

    Authors: M. G. Khalafallah, H. S. Saleh, S. M. Ali and H. M. Abdelkhalek
    Citation: Journal of Engineering and Applied Science 2021 68:43
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions