Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 9 of 9

  1. A global concern claims that activities and functions that once filled traditional public spaces are privatized being less and less oriented to the public. In Cairo’s new settlements, public spaces don’t seem ...

    Authors: Sally M. Murshed, Ahmed M. Ouf and Abbas F. Zafarany
    Citation: Journal of Engineering and Applied Science 2021 68:28
    Content type: Research Published on:

  2. In this paper, a connection between vibration amplitude and tool wear when drilling of IS3048 steel utilizing different dimensioned tools is dissected through tests. Discriminant features, which are sensitive ...

    Authors: Annavarapu Venkata Sridhar, Balla Srinivasa Prasad and K. V. V. N. R. Chandra Mouli
    Citation: Journal of Engineering and Applied Science 2021 68:27
    Content type: Research Published on:

  3. Caustic wash is one of many industrial processes that are used to produce jet fuel. In this study, an analysis of the key parameters of the kerosene caustic wash process was conducted to improve the total perf...

    Authors: Ahmed Mohamed Selim Abdelhamid and Hamdy Abdel-Aziz Mustafa
    Citation: Journal of Engineering and Applied Science 2021 68:26
    Content type: Research Published on:

  4. A straightforward approach to recycle waste expanded polystyrene (EPS) foam to produce polystyrene (PS) microfibers using the improvised centrifugal spinning technique is demonstrated in this work. A typical b...

    Authors: Marco Laurence M. Budlayan, Jonathan N. Patricio, Jeanne Phyre Lagare-Oracion, Susan D. Arco, Arnold C. Alguno, Antonio Basilio, Felmer S. Latayada and Rey Y. Capangpangan
    Citation: Journal of Engineering and Applied Science 2021 68:25
    Content type: Research Published on:

  5. Numerical simulations of pulsatile transitional blood flow through symmetric stenosed arteries with different area reductions were performed to investigate the behavior of the blood. Simulations were carried o...

    Authors: Md. Alamgir Kabir, Md. Ferdous Alam and Md. Ashraf Uddin
    Citation: Journal of Engineering and Applied Science 2021 68:24
    Content type: Research Published on:

  6. Islamabad, being the capital of Pakistan, is attracting every business. Thus, the city is growing towards traffic congestion as the city’s car ownership rate is rapidly growing. In such a situation, for succes...

    Authors: Altaf Ayaz, Abdul Waheed, Hamza Saleem and Malik Muneeb Abid
    Citation: Journal of Engineering and Applied Science 2021 68:23
    Content type: Research Published on:

  7. The technological factors required to improve the operational properties of granulated metallurgical slags demanded in the building industry have been analyzed. In order to satisfy these factors, a new technol...

    Authors: David Sakhvadze, Gigo Jandieri, Giorgi Jangveladze and Giorgi Sakhvadze
    Citation: Journal of Engineering and Applied Science 2021 68:22
    Content type: Research Published on:

  8. The realization of the right to adequate housing is a critical issue that countries seek to achieve through affordable housing projects. However, there is a discrepancy in fulfilling the right to adequate hous...

    Authors: Nahla Mahmoud Hafez, Rowaida Reda Kamel, Doaa Mahmoud Elsherif and Rania Ibrahim Nasreldin
    Citation: Journal of Engineering and Applied Science 2021 68:21
    Content type: Research Published on:

  9. Construction materials contribute to environmental pollution and the impoverishment of natural raw materials. The villages of Upper Egypt were exposed to high thermal loads owing to their geographical location...

    Authors: Walaa Hussein Hussein Hanafi
    Citation: Journal of Engineering and Applied Science 2021 68:20
    Content type: Research Published on:

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  11. Convivial urban spaces are a process as well as a philosophy. They revolve around observing users in specific urban spaces to comprehend their various needs, especially their social needs. Designing urban spac...

    Authors: Mona Y. Shedid and Noha H. Hefnawy
    Citation: Journal of Engineering and Applied Science 2021 68:18
    Content type: Research Published on:

  12. In this work, we have determined the mean square relative displacement, elastic constant, anharmonic effective potential, correlated function, local force constant, and other thermodynamic parameters of diamon...

    Authors: Duc Ba Nguyen and Hiep Phi Trinh
    Citation: Journal of Engineering and Applied Science 2021 68:17
    Content type: Research Published on:

  13. Due to the dynamic loads in power transmission such as automotive, the restoration of axles during maintenance is extensively needed. These parts face two main challenges: wear and fatigue failure loads. The p...

    Authors: A. A. Sayid, E. El-Kashif, M. A. Adly, M. A. Morsy and Abdallah Abdelkawy
    Citation: Journal of Engineering and Applied Science 2021 68:16
    Content type: Research Published on:

  14. Social inclusion aims to achieve an inclusive society that entails respect for human diversity and upholds principles of equality and equity, allowing all groups to take part in the society. Universal Design (UD)...

    Authors: M. E. Khalil, N. A. Mohamed and E. A. Morghany
    Citation: Journal of Engineering and Applied Science 2021 68:15
    Content type: Research Published on:

    The Publisher Correction to this article has been published in Journal of Engineering and Applied Science 2021 68:36

  15. This article investigates utilization of polypropylene microfibers as reinforcement in geopolymer concrete to enhance the ductility characteristics since the geopolymer concrete is considered a brittle materia...

    Authors: Osamah M. G. Al-Kerttani and Ammar Mutar
    Citation: Journal of Engineering and Applied Science 2021 68:14
    Content type: Research Published on:

  16. In recent times, the rapid growth in mobile subscriptions and the associated demand for high data rates fuels the need for a robust wireless network design to meet the required capacity and coverage. Deploying...

    Authors: Hope Ikoghene Obakhena, Agbotiname Lucky Imoize, Francis Ifeanyi Anyasi and K. V. N. Kavitha
    Citation: Journal of Engineering and Applied Science 2021 68:13
    Content type: Reviews Published on:

  18. The debate about polycentricity and subordinacy has always been a critical topic that planners, economists, and socialists argued about for centuries. The idea of concentricity vs decentralization has affected...

    Authors: Ashraf Sami Mahmoud Abozeid and Tarek Abdellatif AboElatta
    Citation: Journal of Engineering and Applied Science 2021 68:11
    Content type: Research Published on:

  19. Collaboration among disciplines is becoming a standard practice in Architecture, Engineering, and Construction (AEC) industry. However, limited studies have addressed the involvement of interdisciplinarity int...

    Authors: A. M. Badawi and M. R. Abdullah
    Citation: Journal of Engineering and Applied Science 2021 68:10
    Content type: Research Published on:

  20. Achieving the Sustainable Development Goals (SDGs) by 2030 ad is one of the challenges and among the cross-cutting issues that countries around the world strive to achieve, despite it is not mandatory, to take...

    Authors: K. M. Elsheekh, R. R. Kamel, D. M. Elsherif and A. M. Shalaby
    Citation: Journal of Engineering and Applied Science 2021 68:9
    Content type: Research Published on:

  22. The impact echo technique is one of the most useful non-destructive test methods for determining the thickness of concrete or detecting possible cracks or cavities in the internal parts of a concrete structure...

    Authors: Pierre Anthyme Bahati, Viet Dinh Le and Yujin Lim
    Citation: Journal of Engineering and Applied Science 2021 68:7
    Content type: Research Published on:

  23. A refining column in the middle east that started its official production in 2020 provides its sour wastewater from all refinery plants to two sour water units (SWS1 and SWS2) to strip H2S and NH3. Sour gas from ...

    Authors: Ahmed Y. Ibrahim, Fatma H. Ashour and Mamdouh A. Gadalla
    Citation: Journal of Engineering and Applied Science 2021 68:6
    Content type: Research Published on:

  24. This study investigates the effect of using steel filings from the waste of blacksmiths workshops on the clay bricks mixture to improve the bricks’ compressive strength. On the other hand, this process can red...

    Authors: Eman N. Shaqour, Aimen H. Abo Alela and Aiman A. Rsheed
    Citation: Journal of Engineering and Applied Science 2021 68:5
    Content type: Research Published on:

  25. The total electron content (TEC) in the ionosphere widely influences Global Navigation Satellite Systems (GNSS) especially for critical applications by inducing localized positional errors in the GNSS measurem...

    Authors: Sumitra Iyer and Alka Mahajan
    Citation: Journal of Engineering and Applied Science 2021 68:4
    Content type: Research Published on:

  26. Under the supervision of UN-Habitat, the Egyptian General Organization of Physical Planning started its first phase of “Promoting Better Quality and More Manageable Public Spaces Project, 2021” that targets en...

    Authors: Dalia M. Rasmi, Mohamed A. Zayed, Khaled M. Dewidar and Hisham S. Gabr
    Citation: Journal of Engineering and Applied Science 2021 68:3
    Content type: Research Published on:

  27. In the real world, the problems mostly are complex; more precisely, the problems generally are nonlinear or large scale other than if it was mandatory to resolve it under certain constraints, and that is commo...

    Authors: Omnia Osman Fadel Abouhabaga, Mohamed Hassan Gadallah, Hanan Kamel Kouta and Mohamed Abass Zaghloul
    Citation: Journal of Engineering and Applied Science 2021 68:2
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions