Skip to main content
Journal of Engineering and Applied Science
Journal of Engineering and Applied Science Cover Image

Articles

Page 7 of 10

  1. In order to explore an accurate method to evaluate the corrosion of reinforced concrete structures, the spontaneous magnetic flux leakage (SMFL) signal distribution on the surface of reinforced concrete specim...

    Authors: Beian Li, Shidong Li, Guangzhao Zhang, Huajian Ying, Qianwen Xia and Shangkai Liu
    Citation: Journal of Engineering and Applied Science 2023 70:3
    Content type: Research Published on:

  2. It is well known that a wireless body area network (WBAN) is a special proposed wireless sensor network (WSN) that can assist in monitoring physiological signals for the evaluation and planning of patient trea...

    Authors: Pitchakron Thippun, Yoschanin Sasiwat, Dujdow Buranapanichkit, Apidet Booranawong, Nattha Jindapetch and Hiroshi Saito
    Citation: Journal of Engineering and Applied Science 2023 70:1
    Content type: Research Published on:

  3. A parametric study was conducted to investigate the influence of geometric factors on the fully encased composite column under eccentric loading about both axes of the steel section by using ABAQUS software. T...

    Authors: Badrinarayan Rath, Feven Kiflu, Bewiket Dereje, Shiferaw Garoma, Kassahun Kebede and Endalkachew Mosisa Gutema
    Citation: Journal of Engineering and Applied Science 2022 69:117
    Content type: Research Published on:

  5. Distance and similarity measures are very important in clustering, pattern recognition, decision-making and other scientific fields. For the existing hesitant fuzzy distance, most of them do not consider the h...

    Authors: Fuping Liao, Wu Li, Xiaoqiang Zhou and Gang Liu
    Citation: Journal of Engineering and Applied Science 2022 69:115
    Content type: Research Published on:

  6. Bio-based oilfield chemicals are gaining attention due to their availability, cost-effectiveness, and non-toxic nature. Surfactants facilitate recovery of residual oil by reducing the interfacial tension betwe...

    Authors: Amalate Ann Obuebite, William Iheanyi Eke and Tinuola Udoh
    Citation: Journal of Engineering and Applied Science 2022 69:114
    Content type: Research Published on:

  7. DNA microarray data sets have been widely explored and used to analyze data without any previous biological background. However, analyzing them becomes challenging if data are missing. Thus, machine learning t...

    Authors: Nourhan Yehia, Manal Abdel Wahed and Mai Said Mabrouk
    Citation: Journal of Engineering and Applied Science 2022 69:113
    Content type: Research Published on:

  8. A correlation effect between particle size of kaolin clay and injection moulding process parameters on impact strength, shrinkage and warpage of high-density polyethylene/kaolin clay (HDPE/KC) composites was c...

    Authors: Abdulrouf Trish, Wael Elhrari, Hussein Etmimi and Abdalah Klash
    Citation: Journal of Engineering and Applied Science 2022 69:112
    Content type: Research Published on:

  9. The progressive collapse of the structure caused by the partial failure of the structure will cause severe consequences and massive losses, and structural progressive collapse resistance has always been a hot ...

    Authors: Chao Bao, Yuhang Zhang, Dahai Lv, Huxiang Wang, Xiaotong Ma, Jixing Cao and Kar Sing Lim
    Citation: Journal of Engineering and Applied Science 2022 69:111
    Content type: Research Published on:

  11. Lateritic soil is a kind of residual soil widespread in tropical countries. This soil usually possesses acceptable engineering properties to be laid under the construction projects. However, it needs treatment...

    Authors: Mohammad Jawed Roshan, Ahmad Safuan Bin A. Rashid, Muhammad Azril Bin Hezmi, Mohammad Nazir Nejabi, Siti Norafida Bt.Jusoh, Sakina Tamassoki and Roslizayati Razali
    Citation: Journal of Engineering and Applied Science 2022 69:109
    Content type: Research Published on:

  12. Small-scale preliminary studies are necessary to determine the feasibility of the machine learning (ML) algorithm and time-evolution kinetics to meet the design specification of the treatment unit. The train a...

    Authors: Victor Ifeanyi Ugonabo, Prosper Eguono Ovuoraye, Ahmad Chowdhury and Endrit Fetahi
    Citation: Journal of Engineering and Applied Science 2022 69:108
    Content type: Research Published on:

  14. Steel plates are used as the main components of steel elements in many structures. Openings in steel elements may exist for maintenance or inspection purposes in addition to creating paths for different fixtur...

    Authors: Maha M. Hassan, Sara I. Mahmoud, Mohammed H. Serror and Ahmed F. Hassan
    Citation: Journal of Engineering and Applied Science 2022 69:106
    Content type: Research Published on:

  15. Local scour is the major cause of bridge water damage. The sediment in the riverbed around the pier is eroded and transported by water flow, leading to a loss of bridge foundation stability. In this study, a h...

    Authors: Kedian Luo, Yuhang Si, Shaohua Lu, Boyang Liang and Hongliang Qi
    Citation: Journal of Engineering and Applied Science 2022 69:105
    Content type: Research Published on:

  16. The idea that computers can build their own programs is extremely significant, and many researchers are working on this challenge. Code generation is described as the process of generating executable code that...

    Authors: Ahmed S. Soliman, Mayada M. Hadhoud and Samir I. Shaheen
    Citation: Journal of Engineering and Applied Science 2022 69:104
    Content type: Research Published on:

  17. This study aims to investigate the effects of piston bowl shape and biodiesel fuel on combustion and emissions of a direct injection (DI) diesel engine. Three configurations of piston bowl geometry are modeled...

    Authors: Mohamed Khaled Abdelrazek, Mohsen Mohamed Abdelaal and Ahmed Mustafa El-Nahas
    Citation: Journal of Engineering and Applied Science 2022 69:103
    Content type: Research Published on:

  18. In programming learning environments, the pressure of delivering many programming assignments makes plagiarism the easiest solution. This highly threatens the learning process; therefore, the need of an automa...

    Authors: Eman Hosam, Mayada Hadhoud, Amir Atiya and Magda Fayek
    Citation: Journal of Engineering and Applied Science 2022 69:102
    Content type: Research Published on:

  20. The looper control of hot strip finishing mill is one of the most critical control items in hot strip rolling mill process. It is a highly complex nonlinear system, with strong states coupling and uncertainty ...

    Authors: Ahmed Gaber, Mahmoud Elnaggar and Hossam Abdel Fattah
    Citation: Journal of Engineering and Applied Science 2022 69:100
    Content type: Reviews Published on:

  22. Laser drilling on polymers has many applications in various industries, such as sensors, aerospace, medical devices, and microelectronics. In this research, a CO2 laser machine was employed for micro-drilling PC ...

    Authors: Ansam E. Abdulwahab, Kadhim A. Hubeatir and Khalil I. Imhan
    Citation: Journal of Engineering and Applied Science 2022 69:98
    Content type: Research Published on:

  23. Expropriation of land is considered a crucial instrument of any development practice. The legitimacy of expropriation is essentially reinforced as it is employed for the public interest, often implied as infra...

    Authors: Amira Abdelrazik Elbortokaly, Ahmed Mohamed Shalaby and Sherin Ali Gammaz
    Citation: Journal of Engineering and Applied Science 2022 69:97
    Content type: Research Published on:

  24. Efficiency in the industrial sector is a priority when seeking to minimize production costs and reduction in losses. Harmonic generation and associated losses need to be treated carefully with broad implementa...

    Authors: Daniel Esene Okojie, Henry Ogbemudia Omoregbee, Coneth Graham Richards, Agha Francis Nnachi and Bertus Wilhelm Bornebroek
    Citation: Journal of Engineering and Applied Science 2022 69:96
    Content type: Research Published on:

  25. To optimize the optimal nozzle structure and multiple nozzle arrangement for hydrate jet crushing and to promote the development of solid fluidization extraction technology for shallow unconformity hydrate in ...

    Authors: Xiaoyu Fang, Xushen Li, Lin Zhong, Xing Fang and Jiang Lu
    Citation: Journal of Engineering and Applied Science 2022 69:95
    Content type: Research Published on:

  27. Physical activity has a great impact on the development and overall health of children. Urban parks, which generally feature both green areas and playgrounds, offer children a wide range of opportunities to be...

    Authors: Shereen A. El-Kholy, Yasser M. Moustafa and Manal A. S. Abou El-Ela
    Citation: Journal of Engineering and Applied Science 2022 69:93
    Content type: Research Published on:

  29. In the Niger Delta, the Jay Field offshore structural model and seismic attribute analysis were carried out to enhance prospect evaluation and mitigate risk in field development operations, especially in regio...

    Authors: Rotimi P. Akinwale, Elijah Ayolabi and Solomon A. Akinwale
    Citation: Journal of Engineering and Applied Science 2022 69:91
    Content type: Reviews Published on:

  30. Through the field of renewable energy, the vertical-axis wind turbine is preferable, especially when the wind speed is low to medium. The optimization of blade structure design is essential to enhance the usab...

    Authors: Ahmed Ali Geneid, Mostafa R. A. Atia and Ahmed Badawy
    Citation: Journal of Engineering and Applied Science 2022 69:90
    Content type: Research Published on:

  31. Bench test has been proved to be an effective method in the field of fatigue life prediction and reliability design for construction machinery internal combustion engine (CMICE), and the reasonable load reprod...

    Authors: Zhijie Li, Yonglai Wang, Chaoqin Liu, Weicheng Kong and Cuicui Chen
    Citation: Journal of Engineering and Applied Science 2022 69:89
    Content type: Research Published on:

  32. Impingement jet heat transfer was studied using liquid and gas fluids to determine better cooling fluid. The materials used were rectangular steel plates of 230 mm by 120 mm by 12 mm, single jet diameters of 1...

    Authors: Azubuike Michael Nwankwo, Thomas Okechukwu Onah and Bertrand Nduka Nwankwojike
    Citation: Journal of Engineering and Applied Science 2022 69:88
    Content type: Research Published on:

  33. The long stay at home during the COVID-19 pandemic implied that most people had to perform all their daily activities at home. That raised the need for special home features related to the health, safety, and ...

    Authors: Nancy H. Alhadedy and Hisham S. Gabr
    Citation: Journal of Engineering and Applied Science 2022 69:87
    Content type: Research Published on:

  34. Experimental and numerical studies are carried out to investigate the flexural behavior of precast lightweight composite beams composed of a hollow steel beam strengthened with a ferrocement layer. This compos...

    Authors: Ehab Elkassas, Alaa M. Morsy and Mohamed Marzouck
    Citation: Journal of Engineering and Applied Science 2022 69:86
    Content type: Research Published on:

  35. Shear walls are critical in designing of reinforced concrete structures against lateral loads. Although various research studies have been conducted on the design of reinforced concrete shear walls, these stud...

    Authors: Reda Fadallah, Mohamed Elbayomy, Hatem Ghith and Hamed Salem
    Citation: Journal of Engineering and Applied Science 2022 69:85
    Content type: Research Published on:

  36. According to the seafloor drill working conditions and the complex formation characteristics of the seafloor, this paper aims to improve the adaptability of the diamond bit to the formation and the coring qual...

    Authors: Jialiang Wang, Chen Chen, Dilei Qian, Fenfei Peng, Mengfei Yu, Yang Sun and Deping Peng
    Citation: Journal of Engineering and Applied Science 2022 69:84
    Content type: Research Published on:

  37. The dramatic increase of different human activities around and along Ismailia Canal threats the groundwater system. The assessment of groundwater suitability for drinking purpose is needed for groundwater sust...

    Authors: Hend Samir Atta, Maha Abdel-Salam Omar and Ahmed Mohamed Tawfik
    Citation: Journal of Engineering and Applied Science 2022 69:83
    Content type: Research Published on:

  38. Cable-stayed bridges have gained greater coverage in the last few decades. This study focuses mainly on two parameters. Firstly, the shape of pylons; the performance of many shapes is investigated after being ...

    Authors: Ahmed M. Fawzy, Khaled F. El-Kashif and Hany A. Abdalla
    Citation: Journal of Engineering and Applied Science 2022 69:82
    Content type: Research Published on:

  39. In the present investigation, the direct reduction of magnetite and hematite powder with and without 5% bitumen at various temperatures has been studied in a hydrogen atmosphere. The prepared samples were fire...

    Authors: Qazi Abdul Khalique Ansari, Hira Lal Soni, Abdul Sami Channa, Kashif Hussain Mangi and Suhaib Ansari
    Citation: Journal of Engineering and Applied Science 2022 69:81
    Content type: Research Published on:

  40. After the increasing climate change and fast urbanization adverse effects on pluvial floods, in addition to the freshwater resources’ shortage risk, transversal urban solutions need to be tackled. This paper f...

    Authors: Hafsa Refaey Elsharqawy, Mohamed Mohamed Elbarmelgy and Ahmed Esam Elmalt
    Citation: Journal of Engineering and Applied Science 2022 69:80
    Content type: Research Published on:

  41. In recent years, the application of nanoadditives in biofuels is gaining much attention due to their increase in thermophysical properties such as high surface area, thermal conductivity, and mass diffusivity....

    Authors: M. Srinivasa Rao, Ch. Srinivasa Rao and A. Swarna Kumari
    Citation: Journal of Engineering and Applied Science 2022 69:79
    Content type: Reviews Published on:

  46. This research aims at producing and characterizing a low-wear friction lining material using a hybrid mixture of burnt vehicle tyres, pulverized palm kernel shell (PKS), pulverized coconut shell (CS), iron and...

    Authors: Chinedum Ogonna Mgbemena, Richard U. Esigie, Chika Edith Mgbemena and Chike M. Ata
    Citation: Journal of Engineering and Applied Science 2022 69:74
    Content type: Research Published on:

  47. This study is a numerical modeling of transport phenomena occurring in the reaction chamber during diamond or amorphous hydrogenated carbon films growth by a hot filament chemical vapor deposition (HFCVD) tech...

    Authors: Nour Khelef, Fethi Khelfaoui and Oumelkheir Babahani
    Citation: Journal of Engineering and Applied Science 2022 69:73
    Content type: Research Published on:

  49. In a world where communication requires ever faster data transmission capable of transmitting high speeds. In order to reach and transmit this high speed, it is necessary to increase the frequency that carries...

    Authors: Kaddour Benkhallouk, Amina Bendaoudi, Mohammed Berka and Zoubir Mahdjoub
    Citation: Journal of Engineering and Applied Science 2022 69:71
    Content type: Research Published on:

  50. Cable-stayed bridges are important infrastructure facilities serving the world today. Therefore, their safety against earthquake ground motions is crucial. However, due to their long spans, the affecting seism...

    Authors: Maryam A. Seleemah, Mohamed S. Helam, Mohamed A. Abu-alenein, Eslam B. Hammad, Mohamed S. Goda, Ayman A. Seleemah and Amr Z. Elkady
    Citation: Journal of Engineering and Applied Science 2022 69:70
    Content type: Research Published on:
Submit manuscript

Affiliated with

Egyptian Knowledge Bank (EKB) Journals

New Content Item (1)

Visit our collection of Egyptian journals.

  • ISSN: 2536-9512 (electronic)

Annual Journal Metrics

2022 Citation Impact
0.250 - SNIP (Source Normalized Impact per Paper)
0.157 - SJR (SCImago Journal Rank)

2023 Speed
4 days submission to first editorial decision for all manuscripts (Median)
97 days submission to accept (Median)

2023 Usage 
399,177 downloads
10 Altmetric mentions