Optimizing the printing parameters for dimensional accuracy of distal femur bone by using Taguchi’s method

Journal of Engineering and Applied Science

Table 4 Absolute dimensional deviation of TEA of 3D printed distal femur bone with S/N ratio and mean

Experiment no	Deviation 1	Deviation 2	Deviation 3	Mean	SN ratio
1	0.25	0.26	0.26	0.256667	11.8111
2	0.28	0.27	0.27	0.273333	11.2649
3	0.30	0.31	0.30	0.303333	10.3605
4	0.32	0.33	0.33	0.326667	09.7170
5	0.29	0.28	0.28	0.283333	10.9528
6	0.30	0.29	0.30	0.296667	10.5535
7	0.27	0.27	0.28	0.273333	11.2649
8	0.29	0.30	0.30	0.296667	10.5535
9	0.33	0.31	0.32	0.320000	09.8942
10	0.31	0.32	0.31	0.313333	10.0789
11	0.29	0.30	0.29	0.293333	10.6517
12	0.28	0.28	0.27	0.276667	11.1596
13	0.31	0.31	0.30	0.306667	10.2656
14	0.29	0.30	0.30	0.296667	11.5535
15	0.34	0.34	0.35	0.343333	09.2849
16	0.31	0.32	0.32	0.316667	09.9870