Optimizing the printing parameters for dimensional accuracy of distal femur bone by using Taguchi’s method

Journal of Engineering and Applied Science

Table 3 Experimental layout of the print parameters using L₁₆ orthogonal array

Experiment no	Infill pattern	Nozzle temperature (°C)	Print speed (mm/sec)	Layer height (mm)	Infill density (%)
1	Lines	200	30	0.1	20
2	Lines	205	70	0.2	40
3	Lines	210	110	0.3	60
4	Lines	215	150	0.4	80
5	Triangles	200	70	0.3	80
6	Triangles	205	30	0.4	60
7	Triangles	210	150	0.1	40
8	Triangles	215	110	0.2	20
9	Cubic	200	110	0.4	40
10	Cubic	205	150	0.3	20
11	Cubic	210	30	0.2	80
12	Cubic	215	70	0.1	60
13	Octet	200	150	0.2	60
14	Octet	205	110	0.1	80
15	Octet	210	70	0.4	20
16	Octet	215	30	0.3	40