Journal of Engineering and Applied Science

Table 16 Normalized values and deviational sequences for MRR, SR, and tool temperature (CuZr)

From: Experimental investigation and optimization of cutting parameters during dry turning process of copper alloy

Exp No	Normalization of S/N ratios			Quality loss (Delta)
Exp No	MRR	SR	Tool Temp	MRR	SR	Tool Temp
1	0.0000	0.5648	0.0000	1.0000	0.4352	1.0000
2	0.9634	0.9796	0.1512	0.0366	0.0204	0.8488
3	0.9769	1.0000	0.3679	0.0231	0.0000	0.6321
4	0.9752	0.196	0.4423	0.0248	0.804	0.5577
5	0.9826	0.4748	0.5636	0.0174	0.5252	0.4364
6	0.9688	0.5386	0.3471	0.0312	0.4614	0.6529
7	0.9904	0.0267	1.0000	0.0096	0.9733	0.0000
8	0.9886	0.2979	0.7505	0.0114	0.7021	0.2495
9	1.0000	0.0000	0.8912	0.0000	1.0000	0.1088

Back to article page