Table 12 Experimental results of MRR for CuZr and CuCrZr
Exp No | Cutting parameters | ||||||
|---|---|---|---|---|---|---|---|
Cutting speed (rpm) | Feed rate (mm/rev) | Depth of cut (mm) | Cutting time for CuZr (min) | MRR for CuZr (mm3/min) | Cutting time for CuCrZr (min) | MRR for CuCrZr (mm3/min) | |
1 | 800 | 0.050 | 1.05 | 0.70 | 1147 | 0.67 | 1172 |
2 | 800 | 0.055 | 1.15 | 0.62 | 1415 | 0.58 | 1507 |
3 | 800 | 0.060 | 1.25 | 0.55 | 1729 | 0.53 | 1789 |
4 | 1000 | 0.050 | 1.15 | 0.52 | 1687 | 0.51 | 1705 |
5 | 1000 | 0.055 | 1.25 | 0.50 | 1881 | 0.49 | 1929 |
6 | 1000 | 0.060 | 1.05 | 0.52 | 1534 | 0.50 | 1611 |
7 | 1200 | 0.050 | 1.25 | 0.45 | 2113 | 0.44 | 2179 |
8 | 1200 | 0.055 | 1.05 | 0.40 | 2059 | 0.38 | 2110 |
9 | 1200 | 0.060 | 1.15 | 0.36 | 2437 | 0.35 | 2522 |