Table 1 Analysis of thermal management on distinct electronic devices

Benjamin et al. [23]

Tablet computer

The latent heat thermal energy storage (LHTES) module displayed that the comfort limit was reached on the front surface after 19.2 min, hence, the LHTES enhanced the safer operating time by 30%.

Outcomes were not transferable to all situations.

Tousif et al. [24]

Tablet computer

Analysis showed that the CM-centric thermal energy storage (TES) unit’s employment was proved and confirmed as the best option for TM of tablet PCs.

The results presented were limited to PT-37-centric TES units.

Lun et al. [25]

Air conditioning

As per the analysis, prototype A2 provided 15.5 W cooling power, which was adequate for maintaining indoor occupants at a thermal neutral sensation when the indoor temperature set-point was augmented to 26.1 C.

Only fewer than young Asian male participants were tested for every single prototype in every single condition.

Ziya et al. [26]

Wearables

Results specified that dip-coating with the AgN W (silver nanowires) dispersion 3 times had led to the optimal loading amount of Ag NWs

Preparation approaches were limited.

Revna et al. [27]

Liquid crystal display (LCD) TV

Results depicted that the applied power supply with 10 mm height has a 34% higher power density concerning its counterpart having 13.5 mm in height.

The power card design for LCD was limited.