Table 4 Variation of PMS output results with different weights of number of products
From: Machining process parameters optimization using soft computing technique
Weight of number of products | 0.10 | 0.20 | 0.30 | 0.40 | 0.50 | 0.60 | 0.70 | 0.80 | 0.90 | 1.00 |
|---|---|---|---|---|---|---|---|---|---|---|
Machining time (min.) | 4.57 | 4.56 | 4.55 | 4.57 | 4.18 | 3.66 | 3.71 | 3.70 | 3.66 | 3.63 |
Power consumed (W) | 688 | 690 | 690 | 688 | 735 | 818 | 808 | 811 | 817 | 823 |
Surface roughness (μm) | 2.05 | 2.05 | 2.06 | 2.05 | 2.16 | 2.34 | 2.32 | 2.32 | 2.34 | 2.35 |