Table 8 Optimal settings for control factors
From: Production of low wear friction lining material from agro-industrial wastes
Response | Control factor | Optimum settings |
|---|---|---|
Wear rate | A: Moulding temperature | 150 |
B: Curing time | 15 | |
C: Heat treatment | 10 |
From: Production of low wear friction lining material from agro-industrial wastes
Response | Control factor | Optimum settings |
|---|---|---|
Wear rate | A: Moulding temperature | 150 |
B: Curing time | 15 | |
C: Heat treatment | 10 |