Journal of Engineering and Applied Science

Table 2 Parameters of 3D printer

From: Investigation of tensile and flexural properties of kenaf fiber-reinforced acrylonitrile butadiene styrene composites fabricated by fused deposition modeling

Layer height	Layer height	0.18 mm
Layer height	First layer height	0.27 mm
Shells	Perimeter shells	2
	Top solid layers	3
	Bottom solid layers	3
Infill	Fill density	100%
	Fill pattern	Line
	Combine infill	Every 2 layers
Speed	Print speed	40 mm/s
Speed	Travel speed	80 mm/s
Temperature	Left extruder	230 °C
Temperature	Platform	105 °C

Back to article page